dubb jet 56
02-14-2021, 11:08 PM
#1
dubb jet 56
Aquired a jett 56. Noticed when the piston is at bottom dead center, the piston is not even with the bottom of the sleeve, it is above it 1/8 to 3/16 s of an inch. The piston actuallly
causes the lose of port area of 20 % to 30% is this the standard with 56 s. appreciate help thanks rich barile.
causes the lose of port area of 20 % to 30% is this the standard with 56 s. appreciate help thanks rich barile.
