TEAM LELAND FLIES 40% EXTRA 300 & 330
04-05-2006, 02:02 PM
#1
Thread Starter
Join Date: Sep 2003
Location: mooresville,
NC
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
TEAM LELAND FLIES 40% EXTRA 300 & 330
LELAND'S Toy Trains and Planes of Hildebran, NC. sponsor 4 team members for there flight team. each team member can choose the plane they want to compete with. All the team members have choosen the JTEC/RADIOWAVE 40% Extra's
The team members consist of
Mark McClellan
Joel Marley
Jimmy Rich
Adam R.
Mark and Adam both have the new Extra 300 while Joel and Jimmy fly the Extra 330L.
Team Leland competes in the SE IMAC district and all will be flying the unlimited class this year
Good Luck and have fun flying your JTEC/RADIOWAVE planes
Al
We will post additional pictures following this post
The team members consist of
Mark McClellan
Joel Marley
Jimmy Rich
Adam R.
Mark and Adam both have the new Extra 300 while Joel and Jimmy fly the Extra 330L.
Team Leland competes in the SE IMAC district and all will be flying the unlimited class this year
Good Luck and have fun flying your JTEC/RADIOWAVE planes
Al
We will post additional pictures following this post
06-10-2013, 01:02 PM
#5
Junior Member
My Feedback: (1)
Join Date: Mar 2013
Location: Fredericksburg , VA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
RE: TEAM LELAND FLIES 40% EXTRA 300 & 330
I might be getting my first 40% extra 300. Actually, it'll be my first big plane. WOO!!! Hope I can get it. It'll cost 2K cause this guy I know is selling me his. Can't wait!!!!!! XD
06-21-2013, 01:14 PM
#6
Thread Starter
Join Date: Sep 2003
Location: mooresville,
NC
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
RE: TEAM LELAND FLIES 40% EXTRA 300 & 330
let us know if you need any help with it. you can contact us at 704-799-1658 or email at [email protected]
Al
Al
I might get it this Sunday. YAY!!!
07-14-2013, 08:48 AM
#8
RE: TEAM LELAND FLIES 40% EXTRA 300 & 330
Hey Al,
I am getting ready to fly my JTEC 39% 330LX after all these years of moving it around. I have a DA-150 and wanted to put pipes in it for Unlimited IMAC next year. Also, I wanted to change out the tubes and gear to Carbon fiber gear and wanted to know where I can find it? I also, have gone to two servos in the tail for elev and two for rudder (500 oz per) and I want to put only two on the ailerons, so one furthest in and the farthest outboard correct (I think I read Chip did that on the newest proto-type?).
Love the new design..., if I had a place to build I would build it.
Hope to see you and Kevin at more District meets for Pattern.
Thanks,
Bill Holsten
NSRCA Dist 2
2009 District-2 FAI/F3A Champion, Dow Lowe Master 2000, 2001, 2003, Lake City 3-D Challenge Champion 2007, Custom Airframes of America, YS parts and Service, Advantage Hobby, Tech-Aero Electronics, Dragon Fire Custom graphics, etc.
I am getting ready to fly my JTEC 39% 330LX after all these years of moving it around. I have a DA-150 and wanted to put pipes in it for Unlimited IMAC next year. Also, I wanted to change out the tubes and gear to Carbon fiber gear and wanted to know where I can find it? I also, have gone to two servos in the tail for elev and two for rudder (500 oz per) and I want to put only two on the ailerons, so one furthest in and the farthest outboard correct (I think I read Chip did that on the newest proto-type?).
Love the new design..., if I had a place to build I would build it.
Hope to see you and Kevin at more District meets for Pattern.
Thanks,
Bill Holsten
NSRCA Dist 2
2009 District-2 FAI/F3A Champion, Dow Lowe Master 2000, 2001, 2003, Lake City 3-D Challenge Champion 2007, Custom Airframes of America, YS parts and Service, Advantage Hobby, Tech-Aero Electronics, Dragon Fire Custom graphics, etc.
