OFFICIAL HPI Sprint 2 Thread (Sport and Flux)
#1477
Senior Member
Join Date: Sep 2007
Location: Cypress, TX
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL HPI Sprint 2 Thread (Sport and Flux)
Called HPI with the problem. I explained what was going on with the pulley. They said that the two shaft mounts holding the pulleys has to be adjusted. Let me explain what part that is... Ok you see the left and right motor mounts, then there is the shaft that holds the pulleys, then you have the bearings sitting on those two round black plastic parts, well those two parts are not perfectly round, they are oval if you look carefully. HPI said that they have to be pointing furthest to the rear.
I've tried it with a new set of pulleys, 5 minutes into the runs and show no sign of wear.
I will keep running today and see how it goes so hopefully this works.
I've tried it with a new set of pulleys, 5 minutes into the runs and show no sign of wear.
I will keep running today and see how it goes so hopefully this works.
#1478
Junior Member
Join Date: Oct 2004
Location: Mastic Beach,
NY
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL HPI Sprint 2 Thread (Sport and Flux)
I called HPI as well was told the same thing ...after breaking a belt and trying there fix it works for a while but belt will still break stretch, or shred.......Installing a tension arm works better belt is lasting allot longer on the initial setup.
#1482
Member
Join Date: Jul 2012
Location: chicago, IL
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL HPI Sprint 2 Thread (Sport and Flux)
ORIGINAL: Car-Boy
No one does.
No one does.
<font color="#00265e">www.ebay.com/itm/HPI-Aluminum-Center-Pulley-15T-Purple-HPI72172-/360476068816</font>
#1483
Junior Member
Join Date: Mar 2012
Location: Svendborg, DENMARK
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL HPI Sprint 2 Thread (Sport and Flux)
<br sab="1062" />
I have seen people use them(link), should do. But again, hard toget item.
ORIGINAL: digitalsmithy<br sab="1063" /><br sab="1064" /><br sab="1065" />
<br sab="1069" /><br sab="1070" />try here, i haven't ordered them yet, but i guess they work<br sab="1071" /><br sab="1072" /><font color="#00265e" sab="1074">www.ebay.com/itm/HPI-Aluminum-Center-Pulley-15T-Purple-HPI72172-/360476068816</font><br sab="1075" /><br sab="1076" />
ORIGINAL: Car-Boy<br sab="1066" /><br sab="1067" />No one does.<br sab="1068" />
#1486
Member
Join Date: Jul 2012
Location: chicago, IL
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL HPI Sprint 2 Thread (Sport and Flux)
ORIGINAL: drc35ca
Try a Tough Racing belt on the rear,I find much stronger!
Try a Tough Racing belt on the rear,I find much stronger!
watcha mean by "tougher" like someone sells stronger ones?
#1488
Member
Join Date: Jul 2012
Location: chicago, IL
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL HPI Sprint 2 Thread (Sport and Flux)
ORIGINAL: drc35ca
Tough Racing from South Korea,kevlar/rubber belt. Makes stock belts look like junk which many are!
Tough Racing from South Korea,kevlar/rubber belt. Makes stock belts look like junk which many are!
thanks.
#1490
Member
Join Date: Feb 2012
Location: CHICAGO,
IL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL HPI Sprint 2 Thread (Sport and Flux)
Do you have part numbers? TIA
ORIGINAL: drc35ca
Tough Racing from South Korea,kevlar/rubber belt. Makes stock belts look like junk which many are!
Tough Racing from South Korea,kevlar/rubber belt. Makes stock belts look like junk which many are!
#1491
Member
Join Date: Feb 2012
Location: CHICAGO,
IL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL HPI Sprint 2 Thread (Sport and Flux)
ORIGINAL: digitalsmithy
mind directing me to these?
thanks.
ORIGINAL: drc35ca
Tough Racing from South Korea,kevlar/rubber belt. Makes stock belts look like junk which many are!
Tough Racing from South Korea,kevlar/rubber belt. Makes stock belts look like junk which many are!
thanks.
#1492
Senior Member
Join Date: Sep 2007
Location: Cypress, TX
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL HPI Sprint 2 Thread (Sport and Flux)
Yup. Still wears out. But it takes longer. Will wait for the traxxas 15t pulley. Still on back order but can't wait till I get it.
#1494
Member
Join Date: Oct 2011
Location: bathurst,
NB, CANADA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL HPI Sprint 2 Thread (Sport and Flux)
http://www.toughracing.com/ ::RC Car Belt::HPI::HPI Sprint RTR / Sprint2 Sport Rear belt replace 87007
It will not allow me to link direct to page?
It will not allow me to link direct to page?
#1495
Member
Join Date: Jul 2012
Location: chicago, IL
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL HPI Sprint 2 Thread (Sport and Flux)
ORIGINAL: drc35ca
http://www.toughracing.com/ ::RC Car Belt::HPI::HPI Sprint RTR / Sprint2 Sport Rear belt replace 87007
It will not allow me to link direct to page?
http://www.toughracing.com/ ::RC Car Belt::HPI::HPI Sprint RTR / Sprint2 Sport Rear belt replace 87007
It will not allow me to link direct to page?
#1497
Member
Join Date: Feb 2012
Location: CHICAGO,
IL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL HPI Sprint 2 Thread (Sport and Flux)
ORIGINAL: Car-Boy
where did you that aluminum pulley? what kind of pulley?
where did you that aluminum pulley? what kind of pulley?
www3.towerhobbies.com/cgi-bin/wti0001p</a>
#1498
Member
Join Date: Oct 2011
Location: bathurst,
NB, CANADA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL HPI Sprint 2 Thread (Sport and Flux)
That appears to be the same pulley? just do a ebay search on the pulleys? I got 3 or 4 from Phils Hobby on ebay.
It stops the belt from tearing up on the top plastic pulley , which just takes a few jumps on it to ground it down quick,bottom diff pulley is much bigger and can spread the load out much better!
It stops the belt from tearing up on the top plastic pulley , which just takes a few jumps on it to ground it down quick,bottom diff pulley is much bigger and can spread the load out much better!
#1499
Member
Join Date: Feb 2012
Location: CHICAGO,
IL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL HPI Sprint 2 Thread (Sport and Flux)
#1500
Senior Member
Join Date: Sep 2007
Location: Cypress, TX
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL HPI Sprint 2 Thread (Sport and Flux)
Just got some parts in and did the work as I saw in some of you guys pics. I didnt do any holes,the rear post by the motor was broken, so I placed a belt tensioner there. It is very well adjustable and alignes perfectly.
On the front belt i added another tensioner but without the plastic part, just used a longer screw to reach the other end. No nut needed there.
It was all an easy fix.
On the front belt i added another tensioner but without the plastic part, just used a longer screw to reach the other end. No nut needed there.
It was all an easy fix.