Official Tamiya TT-01 Thread
#1876
RE: Official Tamiya TT-01 Thread
well im not worried about money, but i guess i dont want to spend over $75, the problem im having is, im charging my pack, then when i go to run it, it only lasts 1 minute. the charger has problems, its new,but not working right i guess. i have a pro peak 2500. is the MRC 959 charger any good?
#1877
Join Date: Dec 2006
Location: , CA
Posts: 1,267
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
ORIGINAL: mindwreck
creates a higher center of gravity. but then he drifts so probably won't even make too much of a difference
creates a higher center of gravity. but then he drifts so probably won't even make too much of a difference
#1878
Senior Member
Join Date: Mar 2006
Location: san luis obispo,
CA
Posts: 2,194
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
Its false peaking. nubus has one and it false peaks even before the pack gets warm. What you can do is restart the charging and check the progress by tempature. If the pack is fully charged it should be quite warm but not hot.
The mrc 959 also false peaks a lot and a lot of people have had them overheat
The mrc 959 also false peaks a lot and a lot of people have had them overheat
ORIGINAL: qwksti
well im not worried about money, but i guess i dont want to spend over $75, the problem im having is, im charging my pack, then when i go to run it, it only lasts 1 minute. the charger has problems, its new,but not working right i guess. i have a pro peak 2500. is the MRC 959 charger any good?
well im not worried about money, but i guess i dont want to spend over $75, the problem im having is, im charging my pack, then when i go to run it, it only lasts 1 minute. the charger has problems, its new,but not working right i guess. i have a pro peak 2500. is the MRC 959 charger any good?
#1879
RE: Official Tamiya TT-01 Thread
just wanted to post some pics of my TT-O1-R
still a work in progress, im looking to get a nice 19t motor any sugestions?
well on with the pics, let me know what you think
still a work in progress got to put my door handle stikers on and trim a B biller out of carbon fiber sticker to match the front window and rear window banners, and the sides of the wing
still a work in progress, im looking to get a nice 19t motor any sugestions?
well on with the pics, let me know what you think
still a work in progress got to put my door handle stikers on and trim a B biller out of carbon fiber sticker to match the front window and rear window banners, and the sides of the wing
#1882
Junior Member
Join Date: Feb 2007
Location: Valenzuela, PHILIPPINES
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
hi ppl,,,i'm new to RC and i want to let you know if these are just right for my TT-01D?
battery pack-http://www.philshobbyshop.com/tek9.asp?pg=products&specific=jmqpinrmj8
charger-http://www.hobbypeople.net/gallery/158326.asp
radio-http://www.brucknerhobbies.com/car_radios.htm (the FUTJ14)
thanks 4 helping me out here y'all,,
battery pack-http://www.philshobbyshop.com/tek9.asp?pg=products&specific=jmqpinrmj8
charger-http://www.hobbypeople.net/gallery/158326.asp
radio-http://www.brucknerhobbies.com/car_radios.htm (the FUTJ14)
thanks 4 helping me out here y'all,,
#1883
RE: Official Tamiya TT-01 Thread
No, he has 4wd ABS braking system on his RC...
Are those fake disc rotors?
#1884
Senior Member
Join Date: Mar 2006
Location: san luis obispo,
CA
Posts: 2,194
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
it would be a pain but i'd still do it. i rather have it model like. i've been thinking of ways to get disc brakes on a 1/10 car.
#1886
RE: Official Tamiya TT-01 Thread
it would be a pain but i'd still do it. i rather have it model like. i've been thinking of ways to get disc brakes on a 1/10 car.
#1888
Senior Member
Join Date: Dec 2006
Location: Montreal, QC, CANADA
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
ORIGINAL: poe
'What paint is that? Thanks
ORIGINAL: Gamesta
My New TT-01 Shell
My New TT-01 Shell
#1889
Senior Member
Join Date: Mar 2006
Location: san luis obispo,
CA
Posts: 2,194
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
1/18 nitro brakes could work. if not ill make them. most of my cars have custom parts i've made. wouldn't be anything different. ill get on it after i fiqure out a way to get a servo controlled clutch system
ORIGINAL: joeyblaze
hmm you could prob rig something up with some kind of pump and what not and try to retro fit some of the Nitro disck break set ups on all 4, but i really doubt you can find all that stuff so lil that it would fit behind the rim. we can still dream
hmm you could prob rig something up with some kind of pump and what not and try to retro fit some of the Nitro disck break set ups on all 4, but i really doubt you can find all that stuff so lil that it would fit behind the rim. we can still dream
#1890
Join Date: Dec 2006
Location: , CA
Posts: 1,267
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
ORIGINAL: joeyblaze
LOL that would be dope . haha just think about putting on the breake pads how much of a pain that would be lol
yes they replace the plastic hex nut that locks into the wheel hub stud, they look pimp
No, he has 4wd ABS braking system on his RC...
Are those fake disc rotors?
#1891
RE: Official Tamiya TT-01 Thread
[link=http://www2.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=Hot+Works+Brake+Disc+&FVPROFIL=+ +&search3=Go]http://www2.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=Hot Works Brake Disc &FVPROFIL= &search3=Go[/link]
They got a few dif colors and are mad cheap
i have the GT25T motor, and i wanna upgrade can some one point me the direction of a better motor, i wann stay brushed and i dont wanna chew my gears up
They got a few dif colors and are mad cheap
i have the GT25T motor, and i wanna upgrade can some one point me the direction of a better motor, i wann stay brushed and i dont wanna chew my gears up
#1893
RE: Official Tamiya TT-01 Thread
The pack will work i have the 3000 type, im thinking about getting some IB4200 tho
dont know about the charger, but i love my DuraTrax Piranha AC/DC Digital Peak Charger NiCd/NiMH
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCLD5&P=ML]http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCLD5&P=ML[/link]
as far as the TX/RX i have the 2PL and i love might wanna spend the extra 30 bucks and get one i feel its a great low cost RX TX
dont know about the charger, but i love my DuraTrax Piranha AC/DC Digital Peak Charger NiCd/NiMH
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCLD5&P=ML]http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCLD5&P=ML[/link]
as far as the TX/RX i have the 2PL and i love might wanna spend the extra 30 bucks and get one i feel its a great low cost RX TX
#1895
Join Date: Dec 2006
Location: , CA
Posts: 1,267
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
ORIGINAL: joeyblaze
[link=http://www2.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=Hot+Works+Brake+Disc+&FVPROFIL=+ +&search3=Go]http://www2.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=Hot Works Brake Disc &FVPROFIL= &search3=Go[/link]
They got a few dif colors and are mad cheap
i have the GT25T motor, and i wanna upgrade can some one point me the direction of a better motor, i wann stay brushed and i dont wanna chew my gears up
[link=http://www2.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=Hot+Works+Brake+Disc+&FVPROFIL=+ +&search3=Go]http://www2.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=Hot Works Brake Disc &FVPROFIL= &search3=Go[/link]
They got a few dif colors and are mad cheap
i have the GT25T motor, and i wanna upgrade can some one point me the direction of a better motor, i wann stay brushed and i dont wanna chew my gears up
#1896
Member
My Feedback: (3)
Join Date: Mar 2005
Location: Tyler,
TX
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
Can someone please tell me what the Turn limit is on the stock Tamiya ESC. I know I read it somewhere in these 74 pages, I just can't find it again... Thanks in advance..
#1897
Join Date: Dec 2006
Location: , CA
Posts: 1,267
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
ORIGINAL: Gamesta
Tamiya PS Gun Metal for the Body Gunmetal TS for the mirrors and wing. The Pics really don't do teh Paint color justice it is stunning in person.
ORIGINAL: poe
'What paint is that? Thanks
ORIGINAL: Gamesta
My New TT-01 Shell
My New TT-01 Shell
#1898
Join Date: Dec 2006
Location: , CA
Posts: 1,267
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
ORIGINAL: N2Otorious
Can someone please tell me what the Turn limit is on the stock Tamiya ESC. I know I read it somewhere in these 74 pages, I just can't find it again... Thanks in advance..
Can someone please tell me what the Turn limit is on the stock Tamiya ESC. I know I read it somewhere in these 74 pages, I just can't find it again... Thanks in advance..
#1899
Senior Member
Join Date: Aug 2006
Location: Bristol, UNITED KINGDOM
Posts: 3,444
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
Yep 23turns but u can go a little lower its trial and error with it a 21turn seems fine too never went any lower myself
but heard of people running 17t as well
but heard of people running 17t as well
#1900
Junior Member
Join Date: Jan 2007
Location: Tyler,
TX
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
Thanks Raguvian and TIGER76. I thought it was 23 also. I also thought there was someone in this thread that ran a 19 with no issues. I'm looking for a safe number because I race the car at our local Tamiya spec TT-01 races. Thanks again...