Welcome to Club SAITO !
My Feedback: (1)
Mode 2 is also how real airplanes and helicopters are set up. The stick controls bank and pitch.
Jim
Dave, that is the best running engine I've ever seen (or heard). Well, I actually didn't hear it often when Jim was doing touch and goes because it idled so low. We were good friends but he wouldn't tell me what it idled at. I asked a few times and he played dumb about it, and you and I know he knew exactly what it was turning. I still laugh about that and you have a great engine.
My Feedback: (102)
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 20,370
Likes: 0
Received 25 Likes
on
25 Posts
John, the .56 flies an RCM 40 with ease, it should fly the Space Walker at half throttle or less. I use a Graupner 12x6 or a Bolly 12.5x6. I have started an engine, prop, fuel and rpm chart in NoteBook, I haven't recorded the .56 yet.
Nice one Dan, is it from your area?
Srtelmaster 150
hey man i got two of those high competition 180’s with CH ignition done. Wow!! They are awesome And run great. Just wanted to thank you for the info for the build. THANKS ITS AWESOME!!!!!
hey man i got two of those high competition 180’s with CH ignition done. Wow!! They are awesome And run great. Just wanted to thank you for the info for the build. THANKS ITS AWESOME!!!!!
My Feedback: (102)
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 20,370
Likes: 0
Received 25 Likes
on
25 Posts
Hey Cap, the .56 is one of those, (just right in every way) engines, what is final compression ratio on your 1.80. I have a C&H Ignition on my high compression, (11.24 to 1) 1.50. Thanks, Dave
Hobby
i don’t know for sure you will have to ask the Srtelamaster150 the numbers. but I took .032 off the case and toched the value pockets a little and i can turn a 16X12 at 7800.
I need to try a 16X10. I world love to put this in my GeeBee to get some speed out of it. If it clears off today i’m going to give it a go.
i don’t know for sure you will have to ask the Srtelamaster150 the numbers. but I took .032 off the case and toched the value pockets a little and i can turn a 16X12 at 7800.
I need to try a 16X10. I world love to put this in my GeeBee to get some speed out of it. If it clears off today i’m going to give it a go.
Satio .56
Thanks for the reply. I did want to place that engine on the Space Walker. Looks like it will be the best choice. That Buck that was in the photo sure was a nice fat one with a nice rack. I do not hunt anymore, that being out in the cold kills me...like I ache too much in cold weather. Going to Florida soon....YAH MAN !!!!
Senior Member
A few years ago, I installed CDI on Saito 220.
They are the best I made on that engine, very pleased.
less fuel consumption, no oil on airplane.
I now have 10% oil can probably go down to 8%
Lars
They are the best I made on that engine, very pleased.
less fuel consumption, no oil on airplane.
I now have 10% oil can probably go down to 8%
Lars
My Feedback: (3)
acdii- shipping from England is usually cheaper than our USPS. It makes up for the slightly higher prices. They drop the VAT if you mention it's for the U.S. That helps a lot. The only downside is it takes a bit longer to get here. My experiences from England has always been good with top notch service. Something was late once and they actually paid to ship it overnight to me from England and it did arrive the next day. I couldn't believe it. England is a good place to shop.