Welcome to Club SAITO !
#3726
Senior Member
My Feedback: (3)
Join Date: Nov 2002
Location: Mary Esther, Florida, FL
Posts: 20,205
Likes: 0
Received 15 Likes
on
14 Posts
RE: Welcome to Club SAITO !
Dang. Hobby makes his post, I try to answer, and before I can hit "Enter" there's three other posts giving the same answer. Oh well., I tried.
Haw.
Bill.
Haw.
Bill.
#3728
Join Date: Feb 2006
Location: camden, SC
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
RE: Welcome to Club SAITO !
Please excuse my ignorance, but i have a tru turn prop hub adapter for my H9 Corsair and I do not know how it is installed. The spinner does not go all the way down to the prop washer when the 2 nuts that came with it are installed and the crank shaft hits the allen bolt before it tightens the spinnerall the way down. Do I need to cut the allen bolt that goes thur the center on the spinner and do I have to use a washer the is tightened down by the first nut.
#3729
RE: Welcome to Club SAITO !
skillet92, I've had to cut down the allen screw before. I used a thin wafer wheel on my Dremel. A slight bevel can be given to the cut edge of the screw by rolling the edge on the flat of the wafer wheel.
#3731
Senior Member
My Feedback: (3)
Join Date: Nov 2002
Location: Mary Esther, Florida, FL
Posts: 20,205
Likes: 0
Received 15 Likes
on
14 Posts
RE: Welcome to Club SAITO !
Danflyrc:
You are now in Club Saito as member number 326, and welcome.
Skillet:
TimC got it right. The Tru-Turn adapters come with a bushing for centering the back plate on the crank, they are selected for the base diameter of the shaft. The prop nuts are also selected for the crank thread size. The retaining screw, the Allen bolt that holds the spinner itself, is the same no matter what engine the spinner will go on. And yes, sometimes it has to be shortened. Don’t worry about it, just shorten it as needed.
Bill.
You are now in Club Saito as member number 326, and welcome.
Skillet:
TimC got it right. The Tru-Turn adapters come with a bushing for centering the back plate on the crank, they are selected for the base diameter of the shaft. The prop nuts are also selected for the crank thread size. The retaining screw, the Allen bolt that holds the spinner itself, is the same no matter what engine the spinner will go on. And yes, sometimes it has to be shortened. Don’t worry about it, just shorten it as needed.
Bill.
#3732
Senior Member
My Feedback: (3)
Join Date: Nov 2002
Location: Mary Esther, Florida, FL
Posts: 20,205
Likes: 0
Received 15 Likes
on
14 Posts
RE: Welcome to Club SAITO !
All:
I don’t know if many members aren’t really too interested in participation here, but I still have only 39 email addresses out of 326 members.
The “Elite” members have their email addresses on file here, they are the ones who can just say “Gimme” for any new information and updates to previous files.
A list of the “Gimmes:”
320 bluestratos
323 Bob Yeager
213 Bone
226 BQuartucy
302 buzzingb
258 captb
260 conchohoncho
325 danflyrc
269 davebart
296 Deadeye
314 F86_SABRE
234 FFOURU
266 HDB
318 huck328
19 IronCross
312 J-3
175 kaastrup
162 Kimhoff
249 krop
160 lrr
228 michael9054
247 moonmonster
236 MOTORMAN37
147 mstcitabria
61 N1EDM
257 piper28
322 raideron
199 rfaria
252 RVM
274 Sarge1947
311 skillet92
254 slopoke
70 solafein
245 spec36
293 T28RON
94 Thunderchild
71 Tom Jones
321 vdraper
250 WALKERS210-RCU
If you want to be added, send your email address by PM or email.
Bill.
I don’t know if many members aren’t really too interested in participation here, but I still have only 39 email addresses out of 326 members.
The “Elite” members have their email addresses on file here, they are the ones who can just say “Gimme” for any new information and updates to previous files.
A list of the “Gimmes:”
320 bluestratos
323 Bob Yeager
213 Bone
226 BQuartucy
302 buzzingb
258 captb
260 conchohoncho
325 danflyrc
269 davebart
296 Deadeye
314 F86_SABRE
234 FFOURU
266 HDB
318 huck328
19 IronCross
312 J-3
175 kaastrup
162 Kimhoff
249 krop
160 lrr
228 michael9054
247 moonmonster
236 MOTORMAN37
147 mstcitabria
61 N1EDM
257 piper28
322 raideron
199 rfaria
252 RVM
274 Sarge1947
311 skillet92
254 slopoke
70 solafein
245 spec36
293 T28RON
94 Thunderchild
71 Tom Jones
321 vdraper
250 WALKERS210-RCU
If you want to be added, send your email address by PM or email.
Bill.
#3735
Senior Member
My Feedback: (3)
Join Date: Nov 2002
Location: Mary Esther, Florida, FL
Posts: 20,205
Likes: 0
Received 15 Likes
on
14 Posts
RE: Welcome to Club SAITO !
OK, apologies to Kmot, jlkonn, TW, W8YE, and several others with whom I have regular correspondence not confined to Club Saito. I should have included them in the “Gimme” list, just too lazy to transfer the addresses I suppose.
Bill.
Bill.
#3736
Senior Member
My Feedback: (3)
Join Date: Nov 2002
Location: Mary Esther, Florida, FL
Posts: 20,205
Likes: 0
Received 15 Likes
on
14 Posts
RE: Welcome to Club SAITO !
And of course I do have my own email address as well. But "The little men in the white coats" say I already talk to myself too much anyway.
Haw.
Bill.
Haw.
Bill.
#3740
Senior Member
Join Date: Dec 2004
Location: Ocean Reef WA, AUSTRALIA
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
RE: Welcome to Club SAITO !
ORIGINAL: William Robison
All:
I don’t know if many members aren’t really too interested in participation here, but I still have only 39 email addresses out of 326 members.
The “Elite” members have their email addresses on file here, they are the ones who can just say “Gimme” for any new information and updates to previous files.
A list of the “Gimmes:”
320 bluestratos
323 Bob Yeager
213 Bone
226 BQuartucy
302 buzzingb
258 captb
260 conchohoncho
325 danflyrc
269 davebart
296 Deadeye
314 F86_SABRE
234 FFOURU
266 HDB
318 huck328
19 IronCross
312 J-3
175 kaastrup
162 Kimhoff
249 krop
160 lrr
228 michael9054
247 moonmonster
236 MOTORMAN37
147 mstcitabria
61 N1EDM
257 piper28
322 raideron
199 rfaria
252 RVM
274 Sarge1947
311 skillet92
254 slopoke
70 solafein
245 spec36
293 T28RON
94 Thunderchild
71 Tom Jones
321 vdraper
250 WALKERS210-RCU
If you want to be added, send your email address by PM or email.
Bill.
All:
I don’t know if many members aren’t really too interested in participation here, but I still have only 39 email addresses out of 326 members.
The “Elite” members have their email addresses on file here, they are the ones who can just say “Gimme” for any new information and updates to previous files.
A list of the “Gimmes:”
320 bluestratos
323 Bob Yeager
213 Bone
226 BQuartucy
302 buzzingb
258 captb
260 conchohoncho
325 danflyrc
269 davebart
296 Deadeye
314 F86_SABRE
234 FFOURU
266 HDB
318 huck328
19 IronCross
312 J-3
175 kaastrup
162 Kimhoff
249 krop
160 lrr
228 michael9054
247 moonmonster
236 MOTORMAN37
147 mstcitabria
61 N1EDM
257 piper28
322 raideron
199 rfaria
252 RVM
274 Sarge1947
311 skillet92
254 slopoke
70 solafein
245 spec36
293 T28RON
94 Thunderchild
71 Tom Jones
321 vdraper
250 WALKERS210-RCU
If you want to be added, send your email address by PM or email.
Bill.
I thought you had my email address Bill and would have considered me worthy of your "Elite" file?
Oh well, guess I'll never get to be an "Elitist"
Woh is me.
TC
#3741
Senior Member
My Feedback: (3)
Join Date: Nov 2002
Location: Mary Esther, Florida, FL
Posts: 20,205
Likes: 0
Received 15 Likes
on
14 Posts
RE: Welcome to Club SAITO !
TC:
Do you have a good optician nearby?
Have him fix you a new pair of glasses, then look at the posted list again. I have no problem seeing "Thunderchild" fourth from the bottom.
And you are an investigator of aircraft accidents? Well, our FAA boys are blind too, they can never find the cause of a crash so everything is "Pilot error."
Haw.
Bill.
Do you have a good optician nearby?
Have him fix you a new pair of glasses, then look at the posted list again. I have no problem seeing "Thunderchild" fourth from the bottom.
And you are an investigator of aircraft accidents? Well, our FAA boys are blind too, they can never find the cause of a crash so everything is "Pilot error."
Haw.
Bill.
#3743
Senior Member
My Feedback: (3)
Join Date: Nov 2002
Location: Mary Esther, Florida, FL
Posts: 20,205
Likes: 0
Received 15 Likes
on
14 Posts
RE: Welcome to Club SAITO !
Here's an updated "Gimme" list, some more have PMed me since the last posting.
320 bluestratos
323 Bob Yeager
213 Bone
226 BQuartucy
302 buzzingb
258 captb
260 conchohoncho
325 danflyrc
305 Dave :^)
269 davebart
296 Deadeye
314 F86_SABRE
234 FFOURU
266 HDB
5 hobbsy
318 huck328
19 IronCross
312 J-3
90 jlkonn
175 kaastrup
162 Kimhoff
62 Kmot
249 krop
160 lrr
228 michael9054
247 moonmonster
236 MOTORMAN37
147 mstcitabria
61 N1EDM
257 piper28
322 raideron
199 rfaria
252 RVM
274 Sarge1947
311 skillet92
254 slopoke
70 solafein
245 spec36
293 T28RON
94 Thunderchild
71 Tom Jones
321 vdraper
250 WALKERS210-RCU
3 William Robison
Bill.
PS: TC, you're now fifth from the bottom. Haw. wr.
320 bluestratos
323 Bob Yeager
213 Bone
226 BQuartucy
302 buzzingb
258 captb
260 conchohoncho
325 danflyrc
305 Dave :^)
269 davebart
296 Deadeye
314 F86_SABRE
234 FFOURU
266 HDB
5 hobbsy
318 huck328
19 IronCross
312 J-3
90 jlkonn
175 kaastrup
162 Kimhoff
62 Kmot
249 krop
160 lrr
228 michael9054
247 moonmonster
236 MOTORMAN37
147 mstcitabria
61 N1EDM
257 piper28
322 raideron
199 rfaria
252 RVM
274 Sarge1947
311 skillet92
254 slopoke
70 solafein
245 spec36
293 T28RON
94 Thunderchild
71 Tom Jones
321 vdraper
250 WALKERS210-RCU
3 William Robison
Bill.
PS: TC, you're now fifth from the bottom. Haw. wr.
#3744
Senior Member
Join Date: Dec 2004
Location: Ocean Reef WA, AUSTRALIA
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
RE: Welcome to Club SAITO !
Professor Bill
Funny you should say that.
I was just cleaning my glasses (yes I will check the script) while sitting here and suddenly reallised the error of my ways!!
In the words of an Australian comedian "HOW EMBARRASMENT!!"
A contrite TC
Funny you should say that.
I was just cleaning my glasses (yes I will check the script) while sitting here and suddenly reallised the error of my ways!!
In the words of an Australian comedian "HOW EMBARRASMENT!!"
A contrite TC
#3745
Senior Member
My Feedback: (3)
Join Date: Nov 2002
Location: Mary Esther, Florida, FL
Posts: 20,205
Likes: 0
Received 15 Likes
on
14 Posts
RE: Welcome to Club SAITO !
TC:
Sorry sir, I had you temporatily confused with Xjet. He's the investigator with the ATSB. You, not being empl;oyed there, should definitely get your glasses checked.
Haw again.
Bill.
PS: Xjet: I have your email in the list also. wr.
Sorry sir, I had you temporatily confused with Xjet. He's the investigator with the ATSB. You, not being empl;oyed there, should definitely get your glasses checked.
Haw again.
Bill.
PS: Xjet: I have your email in the list also. wr.
#3747
Senior Member
My Feedback: (3)
Join Date: Nov 2002
Location: Mary Esther, Florida, FL
Posts: 20,205
Likes: 0
Received 15 Likes
on
14 Posts
RE: Welcome to Club SAITO !
Bruce:
I see you have another “Awaiting Approval.” If it’s fussing about being left off the “Gimme” list I’m sorry – you’re another who is in my regular address book. I’ve now added your email to the club file.
Bill.
I see you have another “Awaiting Approval.” If it’s fussing about being left off the “Gimme” list I’m sorry – you’re another who is in my regular address book. I’ve now added your email to the club file.
Bill.
#3748
Join Date: Feb 2006
Location: camden, SC
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
RE: Welcome to Club SAITO !
Hey Guys,
I have to say thanks because the advice that I receive is always right on. I now have two saitos the 100 that is in a H9Corsair and the 125 the was in a FW-190, but is now waiting for a Funtana 100. I have a ? on the 100 what should be the top RPM I have it at I broke in OK on a APC 14X8 2 blade but the 15X7 3 blade that I have for the Corsair only lets it get to about 7300-7400 RPM. I have an APC 14X8 2 blade that I broke it in with and I had it about 8900 after riching it up about 300 RPM. My ? is I really want to run a three blade what RPM should I be at???
I have to say thanks because the advice that I receive is always right on. I now have two saitos the 100 that is in a H9Corsair and the 125 the was in a FW-190, but is now waiting for a Funtana 100. I have a ? on the 100 what should be the top RPM I have it at I broke in OK on a APC 14X8 2 blade but the 15X7 3 blade that I have for the Corsair only lets it get to about 7300-7400 RPM. I have an APC 14X8 2 blade that I broke it in with and I had it about 8900 after riching it up about 300 RPM. My ? is I really want to run a three blade what RPM should I be at???
#3749
Senior Member
My Feedback: (3)
Join Date: Nov 2002
Location: Mary Esther, Florida, FL
Posts: 20,205
Likes: 0
Received 15 Likes
on
14 Posts
RE: Welcome to Club SAITO !
Skillet:
There’s no reason you shouldn’t run a three bladed prop on your engine. Just be sure the diameter is big enough to reach out past the engine cowling. If the cowling is no more than 7” diameter a 14” prop should be fine – the outer part of the blades does most of the pulling.
I’m a three-bladed freak, if I find a suitable three blade prop I wont use a two bladed one. I normally fly a MAS 14x8 on my FA-120 engines, a 14x6 or maybe a 14x7 would work on your Corsair. I’d try the 14x6 first, looking for rpm around 9000 on the ground.
HTH.
Bill.
There’s no reason you shouldn’t run a three bladed prop on your engine. Just be sure the diameter is big enough to reach out past the engine cowling. If the cowling is no more than 7” diameter a 14” prop should be fine – the outer part of the blades does most of the pulling.
I’m a three-bladed freak, if I find a suitable three blade prop I wont use a two bladed one. I normally fly a MAS 14x8 on my FA-120 engines, a 14x6 or maybe a 14x7 would work on your Corsair. I’d try the 14x6 first, looking for rpm around 9000 on the ground.
HTH.
Bill.
#3750
My Feedback: (63)
Join Date: Jul 2003
Location: Bethlehem, GA
Posts: 1,199
Likes: 0
Received 0 Likes
on
0 Posts
RE: Welcome to Club SAITO !
Anyone have any suggestions on an ARF to mount a Saito 182TD twin on? Looking for an ARF that the motor with fit inside the cowl nicley. Already seen the Monocoupe, not interested in that.
Thanks...
Thanks...