Welcome to Club SAITO !
My Feedback: (6)
My Feedback: (6)
Thanks for the pics. The Liberty Sport looks great. One of Sig's best looking planes, and they made a few of them. Yours is excellent indeed!
They are real fine flying machines too.
They are real fine flying machines too.
acdii, the LS is looking mighty fine. The YS outta yank it around nicely.
Dave, haven't heard how Geri is doing, I hope she's fully recovered.
Pete, if you can hear us, come back!
Happy New Year everyone!
Dave, haven't heard how Geri is doing, I hope she's fully recovered.
Pete, if you can hear us, come back!
Happy New Year everyone!
My Feedback: (102)
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 20,370
Likes: 0
Received 25 Likes
on
25 Posts
I've been communicating with Pete by via E-mail,he's more a little upset that he can't log on.
Geri has water therapy twice a week, it is a pain driving 35 miles each way but is helping. Thanks
Last edited by Hobbsy; 01-01-2020 at 04:11 AM. Reason: Add content
Surely Pete can read our posts on any browser, just can't respond. Has he tried logging in through a browser other than Chrome?
35 miles? I wish, we're almost 2 hours from a creditable Hospital. Good to hear Geri is recovering.
35 miles? I wish, we're almost 2 hours from a creditable Hospital. Good to hear Geri is recovering.
Last edited by Glowgeek; 01-01-2020 at 04:46 AM.
My Feedback: (6)
Pete if you see this I have good luck with the Opera browser! I figure if a bush fire comes near Pete he'll use it to barbecue whatever meat he has on hand or some of the local wildlife!
Well, I tried fitting the functional N strut that I made according to the plans. Too short so it pulls the wings out of alignment. Have to start over. Thankfully I only made one. I ran out of silver brazing wire too, so guess I will have to order some and put the LS on the shelf for now until I get my SIG order and some silver braze. I tried using high tin solder, but not strong enough, was able to crack the joint.
My Feedback: (6)
Well, I tried fitting the functional N strut that I made according to the plans. Too short so it pulls the wings out of alignment. Have to start over. Thankfully I only made one. I ran out of silver brazing wire too, so guess I will have to order some and put the LS on the shelf for now until I get my SIG order and some silver braze. I tried using high tin solder, but not strong enough, was able to crack the joint.
My Feedback: (1)
Dave, somehow I missed that Geri is sick, I hope things get better real quick for her !!
Pete, I was thinking for a moment that I could change my nick name to "Major Payne" , I watch that movie again today, that guy is just too funny. I am very happy you are safe
Jim
Pete, I was thinking for a moment that I could change my nick name to "Major Payne" , I watch that movie again today, that guy is just too funny. I am very happy you are safe
Jim
Last edited by the Wasp; 01-01-2020 at 07:13 PM.
Well I don't know what you bums were doing today, but I got the first day of the year in the box by spending it in my workshop. Spent a bit watching the new Doom on Netflix while cleaning the workbenches and putting things away. Then checked the balance one more time on the Liberty Sport before putting it aside until I get the rest of the stuff to complete it. I then busted out the B-25.
I am almost done with the nacelle scoops. They are the most difficult since there are no plans or drawings for the small scoop that is on Tootsie, so eyeballing as close as I can get. Got both cowls mounted with the Saito FG-30's mounted and all aligned. Then got the idea to cap the scoops with 1/4" balsa and round those as close as I can based on the pictures I have. The inside radius is difficult so packed balsa filler in the corners and once it is hard I can sand in the radius to match the outer radius, then some gorilla glue and get them attached, and I can do the final sanding of the nacelle tops and get some glass on it to protect it from dings so I can flip the wing over and work on the bottoms. I still have to add the humps for the wheels and then make a glass mold so I can make doors. I also got the flaps done and now just have to get the right outerflap to match the wing, It doesn't quite clear the nacelle when deployed so have to shave the inner end down 3/8" and then build out the wing to make up the difference.
So my 2020 has started out really good!
I am almost done with the nacelle scoops. They are the most difficult since there are no plans or drawings for the small scoop that is on Tootsie, so eyeballing as close as I can get. Got both cowls mounted with the Saito FG-30's mounted and all aligned. Then got the idea to cap the scoops with 1/4" balsa and round those as close as I can based on the pictures I have. The inside radius is difficult so packed balsa filler in the corners and once it is hard I can sand in the radius to match the outer radius, then some gorilla glue and get them attached, and I can do the final sanding of the nacelle tops and get some glass on it to protect it from dings so I can flip the wing over and work on the bottoms. I still have to add the humps for the wheels and then make a glass mold so I can make doors. I also got the flaps done and now just have to get the right outerflap to match the wing, It doesn't quite clear the nacelle when deployed so have to shave the inner end down 3/8" and then build out the wing to make up the difference.
So my 2020 has started out really good!
My Feedback: (6)
Well I don't know what you bums were doing today, but I got the first day of the year in the box by spending it in my workshop. Spent a bit watching the new Doom on Netflix while cleaning the workbenches and putting things away. Then checked the balance one more time on the Liberty Sport before putting it aside until I get the rest of the stuff to complete it. I then busted out the B-25.
I am almost done with the nacelle scoops. They are the most difficult since there are no plans or drawings for the small scoop that is on Tootsie, so eyeballing as close as I can get. Got both cowls mounted with the Saito FG-30's mounted and all aligned. Then got the idea to cap the scoops with 1/4" balsa and round those as close as I can based on the pictures I have. The inside radius is difficult so packed balsa filler in the corners and once it is hard I can sand in the radius to match the outer radius, then some gorilla glue and get them attached, and I can do the final sanding of the nacelle tops and get some glass on it to protect it from dings so I can flip the wing over and work on the bottoms. I still have to add the humps for the wheels and then make a glass mold so I can make doors. I also got the flaps done and now just have to get the right outerflap to match the wing, It doesn't quite clear the nacelle when deployed so have to shave the inner end down 3/8" and then build out the wing to make up the difference.
So my 2020 has started out really good!
I am almost done with the nacelle scoops. They are the most difficult since there are no plans or drawings for the small scoop that is on Tootsie, so eyeballing as close as I can get. Got both cowls mounted with the Saito FG-30's mounted and all aligned. Then got the idea to cap the scoops with 1/4" balsa and round those as close as I can based on the pictures I have. The inside radius is difficult so packed balsa filler in the corners and once it is hard I can sand in the radius to match the outer radius, then some gorilla glue and get them attached, and I can do the final sanding of the nacelle tops and get some glass on it to protect it from dings so I can flip the wing over and work on the bottoms. I still have to add the humps for the wheels and then make a glass mold so I can make doors. I also got the flaps done and now just have to get the right outerflap to match the wing, It doesn't quite clear the nacelle when deployed so have to shave the inner end down 3/8" and then build out the wing to make up the difference.
So my 2020 has started out really good!
My Feedback: (102)
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 20,370
Likes: 0
Received 25 Likes
on
25 Posts
I did very similar but cleaned up my power tool work bench to make a nice clean spot for the lathe which is coming today at ?oclock by UPS. I passed an ancient Craftsman 5" bench grinder on to my neighbor, my son had given me a 7" Ryobi. The lathe is coming today and most of the accessories for it tomorrow. I have a few pieces of 6061 aluminum arriving also. I already mentioned that I ordered a second fuse for the Bridi RCM 60 from Eureka, I'll build it custom for the Saito 60 twin. That's it in a Saito Nerd nutshell.
Good to hear she is improving. Keep up the good work.
My Feedback: (102)
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 20,370
Likes: 0
Received 25 Likes
on
25 Posts
Thanks, she's been on my bike exactly twice, we attended the Richmond County fair where my bike was up on display on a fancy diamond plate aluminum stage. She's not much of a biker, her daughter Susan loves it and says I don't scare her like some riders. Both times at the fair we rode home late and between the tall corn fields is a little unnerving. Thank God for the brilliant headlight.
Yeah
I had full intentions of working on airplanes the first of the year but it’s also the first day I’ve had off in months so I pretty much sat on my beeehind most of the day and finally got down to working on new plane’s later in the afternoon.
Also I am scratch building a couple spook 96 old times. The wing looked real cool now that I am building this thins I hate it. But I will work through it and get it done.
I had full intentions of working on airplanes the first of the year but it’s also the first day I’ve had off in months so I pretty much sat on my beeehind most of the day and finally got down to working on new plane’s later in the afternoon.
Also I am scratch building a couple spook 96 old times. The wing looked real cool now that I am building this thins I hate it. But I will work through it and get it done.
Thanks, she's been on my bike exactly twice, we attended the Richmond County fair where my bike was up on display on a fancy diamond plate aluminum stage. She's not much of a biker, her daughter Susan loves it and says I don't scare her like some riders. Both times at the fair we rode home late and between the tall corn fields is a little unnerving. Thank God for the brilliant headlight.
No grid drive to the final output tube. Several of the silver micas in the oscillator and buffer sections had drifted off spec. Fixed that and I had RF drive and output. Still, no audio in the modulator section. Turned out, a shorted DC blocking capacitor put DC into the interstage transformer and opened up the primary. Not having a replacement, I took it apart and rewound it. Now making audio. While there, I replaced all the electrolytic caps in the low voltage 300 volt supply. Also found a 70 year old cold solder joint in the plate current shunt that must have caused a few problems in seven decades of use. Put that one on the air and it really works sweet.
Later in the day, pulled all the unbuilt kits down from the rafters. Taking pics and listing them on RCG later. Got about 10 engines left and those will be listed soon as well.
Good start for 2020!
Lonnie, I hope the 115 is appreciated. Your note didn't appear too enthusiastic?
Happy New Year