Official Tamiya TT-01 Thread
#4953
Senior Member
Join Date: Feb 2008
Location: , ON, CANADA
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
ORIGINAL: Jem93
nah dont wanna get a spektrum, cos i got a really good one that has 10 model memory and everything for $90, it should last me awhile...
nah dont wanna get a spektrum, cos i got a really good one that has 10 model memory and everything for $90, it should last me awhile...
What is the radio you are useing? The one with the 10 model memory??
#4955
Senior Member
Join Date: Dec 2007
Location: East Greenwich,
RI
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
Hey guys my brushless motor broke.. ***[>:] what kind of motors are you guys using for drifting? Also...... I have been using pvc, and i was wondering if upgrading to an Hpi drift tyre would be a good purchase? i got a 200 price limit
#4957
Senior Member
Join Date: Dec 2007
Location: East Greenwich,
RI
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
hey guys. Im Putting together a list of things im going to purchase. Do you think that my stock Tt-01 can put up with a 15t motor?
http://www3.towerhobbies.com/cgi-bin...&I=LXM958&P=SM
http://www3.towerhobbies.com/cgi-bin...?&I=LXVVE6&P=0
http://www3.towerhobbies.com/cgi-bin...?&I=LXKRR9&P=0
http://www3.towerhobbies.com/cgi-bin...?&I=LXUMM1&P=0
http://www3.towerhobbies.com/cgi-bin...&I=LXM958&P=SM
http://www3.towerhobbies.com/cgi-bin...?&I=LXVVE6&P=0
http://www3.towerhobbies.com/cgi-bin...?&I=LXKRR9&P=0
http://www3.towerhobbies.com/cgi-bin...?&I=LXUMM1&P=0
#4958
Senior Member
Join Date: Feb 2008
Location: STATEN ISLANDNY
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
dude, the TT-01 can handle anything out there even a traxxas vxl.
[link]http://sirclegion.com[/link],for your hop-up you can get them cheaper on ebay
[link]http://sirclegion.com[/link],for your hop-up you can get them cheaper on ebay
#4959
Junior Member
Join Date: Nov 2008
Location: Sterling, VA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
ORIGINAL: Mazda ute
Who is useing GPM steel universal shafts on aTT-01? Did you need GPM steel drive cups or the Tamiya steel cups to make it work. GPM uni shafts look very well made.Mine with stock inner cups bind up. Thanks for any info.
Who is useing GPM steel universal shafts on aTT-01? Did you need GPM steel drive cups or the Tamiya steel cups to make it work. GPM uni shafts look very well made.Mine with stock inner cups bind up. Thanks for any info.
Right now I'm running a 3Racing driveline. Knuckles, universals and cups. It works perfectly together, and much easier than troubleshooting or wondering which parts are compatible.
If you already have the GPM universals, I'd go ahead and get the matching diff cups. They make the aftermarket universals much thinner and they shake around in the stock cups, so you have to replace them.
#4960
Senior Member
Join Date: Jan 2009
Location: sydneyNSW, AUSTRALIA
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
ORIGINAL: deejayqueue
I always recommend brand-matching any driveline components. I used a set of "hobbysave" universals with the stock diff cups and shredded them.
Right now I'm running a 3Racing driveline. Knuckles, universals and cups. It works perfectly together, and much easier than troubleshooting or wondering which parts are compatible.
If you already have the GPM universals, I'd go ahead and get the matching diff cups. They make the aftermarket universals much thinner and they shake around in the stock cups, so you have to replace them.
ORIGINAL: Mazda ute
Who is useing GPM steel universal shafts on aTT-01? Did you need GPM steel drive cups or the Tamiya steel cups to make it work. GPM uni shafts look very well made.Mine with stock inner cups bind up. Thanks for any info.
Who is useing GPM steel universal shafts on aTT-01? Did you need GPM steel drive cups or the Tamiya steel cups to make it work. GPM uni shafts look very well made.Mine with stock inner cups bind up. Thanks for any info.
Right now I'm running a 3Racing driveline. Knuckles, universals and cups. It works perfectly together, and much easier than troubleshooting or wondering which parts are compatible.
If you already have the GPM universals, I'd go ahead and get the matching diff cups. They make the aftermarket universals much thinner and they shake around in the stock cups, so you have to replace them.
I'v been looking and i can't seen to find GPM drive cups any were i think the unis will be going back. A few of the other GPM parts i did get were a pain in the but also. Thay seem to be well made just wrong lenght screws and no drawing how to put together, there was like 3 ways to put some things together you had to stuff around to see what gos were.
I think i'll be going the 3 racing at least i know i can get all the parts with no stuffing around.
#4963
Senior Member
Join Date: Jan 2009
Location: sydneyNSW, AUSTRALIA
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
Has any one used a Team Trinity P2K2 motor in a TT-01 ? or TB-02 i have 2 motors a 2 cars. What do you guys think of these motors? info gos
Team TRINITY
P2K2 PRO
RPM: 18,479@5v
Power: [email protected]
Eff: 54.3%@13.6K
Torque: 100.8Nmm
PN: 2121
Says EPIC 27 made in Japan on the motor.
I don't know what any of this means really sounds good but i don't know. What do you guys think?. Thanks.
Team TRINITY
P2K2 PRO
RPM: 18,479@5v
Power: [email protected]
Eff: 54.3%@13.6K
Torque: 100.8Nmm
PN: 2121
Says EPIC 27 made in Japan on the motor.
I don't know what any of this means really sounds good but i don't know. What do you guys think?. Thanks.
#4964
Senior Member
Join Date: Feb 2008
Location: , ON, CANADA
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
ORIGINAL: Jem93
anybody know where to get a 190mm Skyline R34 with light brackets? and i need a servo that wont strip...thanks
anybody know where to get a 190mm Skyline R34 with light brackets? and i need a servo that wont strip...thanks
HPI Makes a 190mm R34 Body. http://www.hpiracing.com/products/en/7327/
R34 w/ Lights http://cgi.ebay.com.my/SKYLINE-GTR-R...mZ250330334335
That took all of 5 mins to find all of that....Try useing google dude when your looking for smiple things.
#4972
Senior Member
Join Date: Feb 2008
Location: , ON, CANADA
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
ORIGINAL: zbot
Do any of you guys use hpi drift tires? I just purchased the advon liscensed hpi drift tire, is it any good?
Do any of you guys use hpi drift tires? I just purchased the advon liscensed hpi drift tire, is it any good?
#4974
Senior Member
Join Date: Feb 2008
Location: , ON, CANADA
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
ORIGINAL: SIRCC
I thougth you were meat and bones, ha-ha. what's up slim.
I thougth you were meat and bones, ha-ha. what's up slim.
How about you?
#4975
Senior Member
Join Date: Feb 2008
Location: STATEN ISLANDNY
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
finally i got the local hobby shop to consider to sponscer our drift club and track, want to take it to the next level and convince roar to start sanction racing for drifting, if you want a link to my tire man let me know, fyeo.