Genesis/Nemesis GST Clutchbell Tool??
#28
Thread Starter
RE: Genesis/Nemesis GST Clutchbell Tool??
The Clutch Tools Have Arrived!!!!! Man, these things are great!! Makes breaking the pinions loose VERY easy!! Changing the pinions will never be the same for me.
I will be PMing those of you who expressed an intrest in the tool, with payment and shipping costs,
The price of the tool is $25.00 + shipping. You wont be disappointed!!
Now for the fun stuff, Pictures!!!!!!
I will be PMing those of you who expressed an intrest in the tool, with payment and shipping costs,
The price of the tool is $25.00 + shipping. You wont be disappointed!!
Now for the fun stuff, Pictures!!!!!!
#30
Thread Starter
RE: Genesis/Nemesis GST Clutchbell Tool??
Thanx Nomobux, Label printed and waiting for the mailman!!!
I know you wont dissappointed, Be sure to let everyone know how this tool works for you!!
Have Fun!
I know you wont dissappointed, Be sure to let everyone know how this tool works for you!!
Have Fun!
#31
Thread Starter
RE: Genesis/Nemesis GST Clutchbell Tool??
Dustin7837, Your Tool Is labeled and waiting for the mailman to pickup!!
Have fun!!
Everyone else, get your order confirmed now, only eight will be shipped on this run...
Have fun!!
Everyone else, get your order confirmed now, only eight will be shipped on this run...
#33
Thread Starter
RE: Genesis/Nemesis GST Clutchbell Tool??
Soil, you have a new PM. Thank you. you should see it before friday. Enjoy, and dont forget to let us know how it works out for you.
Ehjoy and have fun
Ehjoy and have fun
#34
Thread Starter
RE: Genesis/Nemesis GST Clutchbell Tool??
Monaroman, you have new PM, Payment recieved label printed waiting on mailman now.
Good job fellas!!
Thank you-and have fun.
Good job fellas!!
Thank you-and have fun.
#36
Thread Starter
RE: Genesis/Nemesis GST Clutchbell Tool??
Hey Blitz, Yep there will be, but you might not have to wait there are a couple here that have not claimed theirs from the first run, so if thats true I will PM you with the offer.
Fair enough??
Glad to have you in the CEN forum..
Fair enough??
Glad to have you in the CEN forum..
#38
Senior Member
Join Date: Apr 2006
Location: Canvey IslandEssex, UNITED KINGDOM
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
RE: Genesis/Nemesis GST Clutchbell Tool??
Dog Man,
I would take you up on your offer and have one of your tools, but after my engine
lunched itself [:@] in the weekend I have just had to pay out for a new one! []
Sorry.
I would take you up on your offer and have one of your tools, but after my engine
lunched itself [:@] in the weekend I have just had to pay out for a new one! []
Sorry.
#39
Thread Starter
RE: Genesis/Nemesis GST Clutchbell Tool??
Scott thats ok bra, Sh-t happenes...My condolences to your loss....We will catch you next time 'round.
I love getting new engines, so have fun....
I love getting new engines, so have fun....
#40
Thread Starter
RE: Genesis/Nemesis GST Clutchbell Tool??
Hey Nitro, gotta picture of the tool you had made? Just curious to see what you came up with...PM me with it if you want.
#41
Senior Member
Join Date: Mar 2006
Location: DevonportTasmania, AUSTRALIA
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
RE: Genesis/Nemesis GST Clutchbell Tool??
Hey The Real Dogman,
No problems, I will post it as soon as I charge the batteries for my camera. If I ever find the charger!
Not as flash as yours, by any means...
.46NitroAddict[>:]
No problems, I will post it as soon as I charge the batteries for my camera. If I ever find the charger!
Not as flash as yours, by any means...
.46NitroAddict[>:]
#43
Senior Member
My Feedback: (4)
Join Date: Feb 2005
Location: Ellensburg, WA
Posts: 1,598
Likes: 0
Received 0 Likes
on
0 Posts
RE: Genesis/Nemesis GST Clutchbell Tool??
TRD .... Got mine today ... Took my spare clutch bell out and the fit is perfect. Also, very versital as far as vise, bar, or wrench. Good job and thank you. As a side note, you fellows running a Nem or Gen, you can't go wrong here.
#44
Thread Starter
RE: Genesis/Nemesis GST Clutchbell Tool??
Soilwork and Nomobux, Thank you for the kind words fellas!!! It was fun! pretty fast on the mail since those did not actually get picked up until Tues, The mail man missed my office Monday(Confession Time).
Now I just hope the others, Dustin's and Monaroman's Tools make it thru customs quickly(I did label it as a gift) You fellas should see your soon!! Prolly Dustin first then Mr. Monaro.
Nomobux, I'm glad you had enough Bux For this tool, you wont be sorry...
Again, Thank you and Enjoy!!
BTW Google "Clutchbell Tool" Kinda cool! My brother in Michigan showed me that one!!
Now I just hope the others, Dustin's and Monaroman's Tools make it thru customs quickly(I did label it as a gift) You fellas should see your soon!! Prolly Dustin first then Mr. Monaro.
Nomobux, I'm glad you had enough Bux For this tool, you wont be sorry...
Again, Thank you and Enjoy!!
BTW Google "Clutchbell Tool" Kinda cool! My brother in Michigan showed me that one!!
#45
Senior Member
Join Date: Jan 2007
Location: Sydney, AUSTRALIA
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
RE: Genesis/Nemesis GST Clutchbell Tool??
Awaiting anxiously TRD, customs shouldn't be a big drama... unless the sniffer dogs take interest, apparently dogs can smell fear - the fear of my GST now that I have no worries about thrashing pinions...
Which reminds me
Cen, where's the hardened pinions?!?!
Which reminds me
Cen, where's the hardened pinions?!?!
#46
Member
Join Date: Aug 2006
Location: Spirit Lake, ID
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
RE: Genesis/Nemesis GST Clutchbell Tool??
Drop me a email when you have more for sale [email protected] Im sure i need one also
#47
Senior Member
Join Date: Mar 2006
Location: DevonportTasmania, AUSTRALIA
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
RE: Genesis/Nemesis GST Clutchbell Tool??
Hey The Real Dogman,
The photo shows a tool I made to hold the 21t & 17T pinion Gears whilst removing them from the clutch bell, works well in a vice. Allowing the reuse of your 21T gear especially when it's not worn like your 17t usually is! (2 hole nylon block, with slots).
The other 2 piece nylon block is what I use to hold my flywheel with (using multigrips) whilst undoing the crankshaft clutchbell retaining bolt. No flywheel scratches!
Finally the clutchbell tool, is a sliding fit on the inside of the bell & the drive fingers protrude a simmilar distance to yours! The flat end works fine with a 1" open end spanner or Adj. shifter, (or a vice). Basically a copy of the one posted on the CEN site last year!
I usually put the drive gear in the nylon block in a vice, & undo the bell using a spanner.
Works well for me!
Regards, .46NitroAddict [>:]
ORIGINAL: The Real Dogman
Hey Nitro, gotta picture of the tool you had made? Just curious to see what you came up with...
Hey Nitro, gotta picture of the tool you had made? Just curious to see what you came up with...
The other 2 piece nylon block is what I use to hold my flywheel with (using multigrips) whilst undoing the crankshaft clutchbell retaining bolt. No flywheel scratches!
Finally the clutchbell tool, is a sliding fit on the inside of the bell & the drive fingers protrude a simmilar distance to yours! The flat end works fine with a 1" open end spanner or Adj. shifter, (or a vice). Basically a copy of the one posted on the CEN site last year!
I usually put the drive gear in the nylon block in a vice, & undo the bell using a spanner.
Works well for me!
Regards, .46NitroAddict [>:]
#48
Senior Member
My Feedback: (4)
Join Date: Feb 2005
Location: Ellensburg, WA
Posts: 1,598
Likes: 0
Received 0 Likes
on
0 Posts
RE: Genesis/Nemesis GST Clutchbell Tool??
If it works, ya can't ask for more.
ORIGINAL: .46NitroAddict
Hey The Real Dogman,
The photo shows a tool I made to hold the 21t & 17T pinion Gears whilst removing them from the clutch bell, works well in a vice. Allowing the reuse of your 21T gear especially when it's not worn like your 17t usually is! (2 hole nylon block, with slots).
The other 2 piece nylon block is what I use to hold my flywheel with (using multigrips) whilst undoing the crankshaft clutchbell retaining bolt. No flywheel scratches!
Finally the clutchbell tool, is a sliding fit on the inside of the bell & the drive fingers protrude a simmilar distance to yours! The flat end works fine with a 1" open end spanner or Adj. shifter, (or a vice). Basically a copy of the one posted on the CEN site last year!
I usually put the drive gear in the nylon block in a vice, & undo the bell using a spanner.
Works well for me!
Regards, .46NitroAddict [>:]
Hey The Real Dogman,
ORIGINAL: The Real Dogman
Hey Nitro, gotta picture of the tool you had made? Just curious to see what you came up with...
Hey Nitro, gotta picture of the tool you had made? Just curious to see what you came up with...
The other 2 piece nylon block is what I use to hold my flywheel with (using multigrips) whilst undoing the crankshaft clutchbell retaining bolt. No flywheel scratches!
Finally the clutchbell tool, is a sliding fit on the inside of the bell & the drive fingers protrude a simmilar distance to yours! The flat end works fine with a 1" open end spanner or Adj. shifter, (or a vice). Basically a copy of the one posted on the CEN site last year!
I usually put the drive gear in the nylon block in a vice, & undo the bell using a spanner.
Works well for me!
Regards, .46NitroAddict [>:]
#49
Thread Starter
RE: Genesis/Nemesis GST Clutchbell Tool??
Sweet nitro, I like the idea of using a high impact plastic to clamp onto the pinions to remove them.
Glad it all works well for you, thats what counts really!!!
Thanx for posting the pics And most of all have fun!!
Glad it all works well for you, thats what counts really!!!
Thanx for posting the pics And most of all have fun!!
#50
Thread Starter
RE: Genesis/Nemesis GST Clutchbell Tool??
Hey blitz, your tool went out in mail yesterday. you should see it by Wednesday!!
You'll love it the first time you have to break loose the pinion.
I have three more ready for shipment if anyone else is interested!!!!!
You'll love it the first time you have to break loose the pinion.
I have three more ready for shipment if anyone else is interested!!!!!