Skymaster 1:6 A10 Build
#576
RE: Skymaster 1:6 A10 Build
Well, I maidened my A10 today, and everything went great had two awesome flights,, with no issues at all. very little trim was needed.. She fly's great and lands even better...
I reinforced the tail for added piece of mind...
I reinforced the tail for added piece of mind...
#578
Banned
Join Date: Oct 2012
Location: , , UNITED KINGDOM
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymaster 1:6 A10 Build
ORIGINAL: airspeed917
I hope this is an isolated incident, but one has to wonder since it happend while using two P160's if it was overpowered through the loop,, unless the engines were tuned down, the're still putting out well over 30lbs total thrust at half throttle.
In any case having seen what happend and what the inside looks like after Anton posted that picture of it cut open.
I went into the tail yesterday and added pieces of hard wood and balsa and nearly two tubes of hysol so now the ribs on the sides the upper and lower pieces of plywood the screw guide tubes and the rear former are all tied into each other. Better safe than sorry......... Ron
I hope this is an isolated incident, but one has to wonder since it happend while using two P160's if it was overpowered through the loop,, unless the engines were tuned down, the're still putting out well over 30lbs total thrust at half throttle.
In any case having seen what happend and what the inside looks like after Anton posted that picture of it cut open.
I went into the tail yesterday and added pieces of hard wood and balsa and nearly two tubes of hysol so now the ribs on the sides the upper and lower pieces of plywood the screw guide tubes and the rear former are all tied into each other. Better safe than sorry......... Ron
Did that extra weight in the tail change your CG much ?
#579
RE: Skymaster 1:6 A10 Build
I made the jet slightly nose heavy to begin with. The extra weight really had no effect .. it flew great....
It's worth going into the tail to reinforce it... The extra weight is a small price to pay when you think of what can happen
If you don't do it.
It's worth going into the tail to reinforce it... The extra weight is a small price to pay when you think of what can happen
If you don't do it.
#584
My Feedback: (7)
Join Date: Aug 2005
Location: , SC
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymaster 1:6 A10 Build
Just received this picture from Skymaster showing me what my stab looks like after the strengthening mod they did to the stab of my A10. It is due to leave the factory this week supposedly. Thought I'd post it for the curious!
#585
My Feedback: (1)
RE: Skymaster 1:6 A10 Build
I just finished the modifications with quite a few layers of CF, some wood structures I built in across top, botton and the tube guide...... very very stong.
My Stab when I opened was in very good shape and the joint of the screw wood plate to the spar was quite solid..... but just in case I did the modifications. The pictures provided by SM was just perfect, Thanks Anton and John.
Check out the nice cover that I did in front! with pleanty of space to do all the modifications you need and without cutting the nice bottom surface.
Enjoy,
Gonzalo
My Stab when I opened was in very good shape and the joint of the screw wood plate to the spar was quite solid..... but just in case I did the modifications. The pictures provided by SM was just perfect, Thanks Anton and John.
Check out the nice cover that I did in front! with pleanty of space to do all the modifications you need and without cutting the nice bottom surface.
Enjoy,
Gonzalo
#591
RE: Skymaster 1:6 A10 Build
I had the pleasure of seeing Gonzalo fly his A-10 this weekend and it was incredible! I can not believe how docile the plane is to land. Great job Gonzalo!!
#593
My Feedback: (4)
RE: Skymaster 1:6 A10 Build
ORIGINAL: gonzalom
Thank you Dantley! What a Fantastic day we had! I had so much fun flying with you guys!
I will post later a video of your amazing SM Hawk my friend!
Now we need to get your A10 ready for the tandem combat missions.
Gonzalo
Thank you Dantley! What a Fantastic day we had! I had so much fun flying with you guys!
I will post later a video of your amazing SM Hawk my friend!
Now we need to get your A10 ready for the tandem combat missions.
Gonzalo
Wanna do it this sat?
#594
RE: Skymaster 1:6 A10 Build
ORIGINAL: JackD
A10, F14, rafale... let's do a TWIN meet!!!!!
Wanna do it this sat?
ORIGINAL: gonzalom
Thank you Dantley! What a Fantastic day we had! I had so much fun flying with you guys!
I will post later a video of your amazing SM Hawk my friend!
Now we need to get your A10 ready for the tandem combat missions.
Gonzalo
Thank you Dantley! What a Fantastic day we had! I had so much fun flying with you guys!
I will post later a video of your amazing SM Hawk my friend!
Now we need to get your A10 ready for the tandem combat missions.
Gonzalo
Wanna do it this sat?
#595
RE: Skymaster 1:6 A10 Build
Gonzalo:
Very nice flight tocayo.....
I received mine two weeks ago and I hope to have it ready for maiden flight before the end of the year.
By the way.... when are you going to visit us down here ?
Very nice flight tocayo.....
I received mine two weeks ago and I hope to have it ready for maiden flight before the end of the year.
By the way.... when are you going to visit us down here ?
#596
My Feedback: (1)
RE: Skymaster 1:6 A10 Build
Thank you Gonzalo tocayo! who knows.... I might be able to combine a business trip and stop by in Santiago! A few months ago I was in Sao Paulo.
Perhaps a group of us can visit one of the cool events you guys run there...... we should try for Ali to come there too.
Enjoy your A10! I LOVE mine!!! I can't imagine you would have it ready in a few more weeks!
Gonzalo
Perhaps a group of us can visit one of the cool events you guys run there...... we should try for Ali to come there too.
Enjoy your A10! I LOVE mine!!! I can't imagine you would have it ready in a few more weeks!
Gonzalo
#597
RE: Skymaster 1:6 A10 Build
I think that the idea is to plan a big jet event in Santiago for next year and that would work as the big celebration of the opening of our new club. Now I need to assemble a Tucano TP, a Marchetti TP and a CT-114 from Comp Arf. Still, 80 or 90% of the fleet down here is Skymaster. Maybe Anton can sponsor the event
Plenty of planes for you to fly down here.... and a couple of Varios.
I will keep you posted on the event.
A fly by of our new club
http://www.youtube.com/watch?v=f0ktw...ature=youtu.be
Plenty of planes for you to fly down here.... and a couple of Varios.
I will keep you posted on the event.
A fly by of our new club
http://www.youtube.com/watch?v=f0ktw...ature=youtu.be