Skymaster 1:6 A10 Build
#676
RE: Skymaster 1:6 A10 Build
Gonzalo and I put some flights on our A-10s yesterday. I now have 4 flights on my A-10 and I'm really enjoying the plane. The A-10 is very stable even in the 15-20mph wind we were flying in. Gonzalo and I got a chance to fly both A-10s together, which was just too much fun! I began incorporating aerobatics into my last flight and look forward to doing more on our next outing. One highlight for me was putting the A-10 into knife edge and realizing it can fly high alpha knife edge! It looks really freaking cool and it's a scale maneuver! On a sour note, my right fan broke just like Ron's. Hope to have a replacement from Skymaster soon. Here's a short video of our outing.
[youtube]http://www.youtube.com/watch?v=BM3yt_S5om8&feature=youtu.be[/youtube]
[youtube]http://www.youtube.com/watch?v=BM3yt_S5om8&feature=youtu.be[/youtube]
#677
My Feedback: (1)
RE: Skymaster 1:6 A10 Build
What a Fantastic day! despite of the high winds the A10’s performed exceptionally well! The formation flying was soo freaking cool! With Jack’s doing high alphas on the Raffle and Hans F16 was like attending and serious airshow!
I had a BLAST!
Gonzalo
I had a BLAST!
Gonzalo
#678
RE: Skymaster 1:6 A10 Build
Hi Guys,
Where I buy these decals Dassas ingnias of squads that appear in that photo the A-10?<div>I'm riding one and want to put these decal.</div><div></div><div>TKS</div><div></div><div>Bruno</div>
#679
Hi guys.. I just got a package from SM that contained two 1/4" carbon fiber rods about 10 inches long,
A bag of about 20 or so 1/4" x1/4" pieces of 1/8" plywood. A few small pieces of carbon fiber material
And a bag of about 20 or so tiny screws.... there were no instructions or a note telling me what this stuff
Was for? Did anyone get a similar package, and have any clue what this stuff is for? Thanks. Ron
A bag of about 20 or so 1/4" x1/4" pieces of 1/8" plywood. A few small pieces of carbon fiber material
And a bag of about 20 or so tiny screws.... there were no instructions or a note telling me what this stuff
Was for? Did anyone get a similar package, and have any clue what this stuff is for? Thanks. Ron
#683
#685
I thought I would revive this thread with a video from my Mobius mini cam.
http://www.youtube.com/watch?v=x0tKe...&feature=share
m
http://www.youtube.com/watch?v=x0tKe...&feature=share
m
#688
Join Date: Sep 2003
Location: SAN SALVADOR, EL SALVADOR
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
To all SKYMASTER A-10 community, I´m happy to tell all that thanks to this forum, Ali M.,grumania and other great people at fla jets,I have completed and flown my A-10, a wonderful airplane 57 lb. before fuel, jets munt 140, 3.75 lb nose led, SM mods on nacelles,c.g. 145 mm...
#689
My Feedback: (21)
Join Date: Nov 2002
Location: Apopka,
FL
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Hi all,
What are you guys doing for the long servo extension runs? Are you guys making your own to length or buying and joining to one another to make length? What's recommended?
Thanks in advance!
What are you guys doing for the long servo extension runs? Are you guys making your own to length or buying and joining to one another to make length? What's recommended?
Thanks in advance!
#692
nice video !
ONBOARD CAM / A-10 TANKBUSTER - MICK BURRELL WINGS & WHEELS RC MODEL AIRCRAFT SHOW 2014
http://www.youtube.com/watch?v=SQPugtho5Oc&list=UUMQ5IpqQ9PoRKKJI2HkUxEw&feature=share&index=3
ONBOARD CAM / A-10 TANKBUSTER - MICK BURRELL WINGS & WHEELS RC MODEL AIRCRAFT SHOW 2014
http://www.youtube.com/watch?v=SQPugtho5Oc&list=UUMQ5IpqQ9PoRKKJI2HkUxEw&feature=share&index=3
#696
My Feedback: (1)
Love the video Mick! I should put a camera on my A10 too! Also I noticed your landings with the air brakes on! Very cool but I haven't try that yet! Let's us know your experience on that.
Mike, I am glad you starting to enjoy the A10! Mine it's flying like a dream with the PB SRS!
Very soon Best in the West will be here and I can't wait to do more A10 formation flights with the A10s crew!
Gonzalo
Mike, I am glad you starting to enjoy the A10! Mine it's flying like a dream with the PB SRS!
Very soon Best in the West will be here and I can't wait to do more A10 formation flights with the A10s crew!
Gonzalo
#697
My Feedback: (21)
Join Date: Nov 2002
Location: Apopka,
FL
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Hi All,
Is anyone using the Tam pipes on their A-10? I purchased a set from him and I will be using twin KT 140's. When I install the turbine and the pipes with proper exhaust clearance, the pipes stick out to far to use the scale cones. Any ideas on fixes? Is the length of these pipes of any importance? Can't get Tam on the phone to figure out other options/
Any info would greatly be appreciated!
Thanks in Advance!!!
Is anyone using the Tam pipes on their A-10? I purchased a set from him and I will be using twin KT 140's. When I install the turbine and the pipes with proper exhaust clearance, the pipes stick out to far to use the scale cones. Any ideas on fixes? Is the length of these pipes of any importance? Can't get Tam on the phone to figure out other options/
Any info would greatly be appreciated!
Thanks in Advance!!!
#700
My Feedback: (16)
Hi All,
Is anyone using the Tam pipes on their A-10? I purchased a set from him and I will be using twin KT 140's. When I install the turbine and the pipes with proper exhaust clearance, the pipes stick out to far to use the scale cones. Any ideas on fixes? Is the length of these pipes of any importance? Can't get Tam on the phone to figure out other options/
Any info would greatly be appreciated!
Thanks in Advance!!!
Is anyone using the Tam pipes on their A-10? I purchased a set from him and I will be using twin KT 140's. When I install the turbine and the pipes with proper exhaust clearance, the pipes stick out to far to use the scale cones. Any ideas on fixes? Is the length of these pipes of any importance? Can't get Tam on the phone to figure out other options/
Any info would greatly be appreciated!
Thanks in Advance!!!
I am using Tam pipes with JC Cheetahs in my SM A-10 and had to shorten the pipes to use them with the scale cones. Simply remove the bell mouth, cut off excess material from the front of the pipe and re-install the bell mouth. I used sharp tin snips to cut the stainless pipe. The distance between the tail cone and the bell mouth entrance will be whatever KingTech recommends.