Welcome to Club SAITO !
#7526
Senior Member
My Feedback: (1)
Join Date: Mar 2005
Location: palm, FL
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
RE: Welcome to Club SAITO !
i was just wondering and i think suitcase could possibly help me out are YS engines reliable and also if you have one do you think the YS 63 is a better engine that the 82 as far as power im debating one or the other for my next plane if i got the saito i would buy the header pipe that some of the guys are using
#7533
Senior Member
Join Date: Dec 2003
Location: detroit, ME,
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
RE: Welcome to Club SAITO !
Thanks, I did a search for Saito prop nuts and that did not show up!
#7534
My Feedback: (23)
Join Date: Aug 2002
Location: Crown Point, IN
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
RE: Welcome to Club SAITO !
Gentelmen,
I don't know what number I will be ,but, Sign me up as a SATIO MEMBER forever.
I have a 56 in my RASCAL,(a perfect match) a 72 in my Decathlon a 91 in HELLCAT[color=#FF3300], in my a 100 my AT-6 TEXAN,a 91 in my FUNTANA, a 150 in my PT-17 STEARMAN,and I am looking for a 180-to220, put in my (not here yet ) SUPER DECATHLON. For me, Nothing beats the Smell of NITRO in the morning,an the MUSIC OF A FOUR STOKE.And no one,makes those two better than SAITO....
I don't know what number I will be ,but, Sign me up as a SATIO MEMBER forever.
I have a 56 in my RASCAL,(a perfect match) a 72 in my Decathlon a 91 in HELLCAT[color=#FF3300], in my a 100 my AT-6 TEXAN,a 91 in my FUNTANA, a 150 in my PT-17 STEARMAN,and I am looking for a 180-to220, put in my (not here yet ) SUPER DECATHLON. For me, Nothing beats the Smell of NITRO in the morning,an the MUSIC OF A FOUR STOKE.And no one,makes those two better than SAITO....
#7537
Senior Member
My Feedback: (1)
Join Date: Mar 2005
Location: palm, FL
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
RE: Welcome to Club SAITO !
can you reverse the way the saito 100 or 82 spins if so how can i do it i saw in this thread there was a cam that you could buy for the 150 is there the same for these two engines
#7538
Banned
Join Date: Mar 2003
Location: Tokoroa, , NEW ZEALAND
Posts: 3,848
Likes: 0
Received 0 Likes
on
0 Posts
RE: Welcome to Club SAITO !
ORIGINAL: w8yeWhile in the area I went to another guys house who had a old model Saito 72 that had never been run. When he started to run the engine, it seized up. When disassembled, the rod had frozen onto the crankshaft.
After some struggle we got the rod off the crank and naturally it was galled in the big end. I worked with the rod with clean oil and a rag putting it on the crank pin and twisting until it seemed to be free enough to run.
#7539
Senior Member
My Feedback: (3)
Join Date: Sep 2005
Location: Somewhere,
AZ
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
RE: Welcome to Club SAITO !
I am looking to buy my first Saito for a SIG Kadet Senior ARF. I want to climb out vertical and do some slow 3D, but yet float around slow flight. I can't decide on Saito 72, 82a or 91S?
Any thoughts?
Thanks
Any thoughts?
Thanks
#7540
RE: Welcome to Club SAITO !
Suitcase, your tank plumbing is perfect. Did you use regular silicone tubing on the clunk lines? I know that works good and they don't get twisted or anything. That thin, very flexible tubing that comes with the tanks looks suspicious to me and I've stayed away from it.
It's so easy to take a peek at the valves that I do it before even running the engine. I've heard of them coming too far out of adjustment right from the factory before but I don't know often that would happen.
Some folks would say to use a fuel that has a small percentage of castor in it instead of the purely synthetic that YS engines need because of the diaphram in their pump. You'd have more protection against a hot or lean run and possibly better oiling in the cam area. Personal preference though. It's interesting to go back and read Bill Robison's notes on that.
Ernie
It's so easy to take a peek at the valves that I do it before even running the engine. I've heard of them coming too far out of adjustment right from the factory before but I don't know often that would happen.
Some folks would say to use a fuel that has a small percentage of castor in it instead of the purely synthetic that YS engines need because of the diaphram in their pump. You'd have more protection against a hot or lean run and possibly better oiling in the cam area. Personal preference though. It's interesting to go back and read Bill Robison's notes on that.
Ernie
#7542
My Feedback: (102)
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 20,370
Likes: 0
Received 25 Likes
on
25 Posts
RE: Welcome to Club SAITO !
I had mentioned a few days ago that the factory tank in my RCM 40 had split and fuel was spraying into intake air and making the engine run very rich. I replaced the tank and thought there was no damage as the engine compartment appeared to be fuel proof, (not). On my third landing of the day the wood around the nose gear block gave way, it was soft and would bend like cardboard. The plane now has a new 1/4 inch ply firewall (coated with epoxy) and I used a nose gear block that is twice as long as the original. I also replaced the .56GK with a late .50. It turns a Bolly 12.5x6 at 9,600 on WildCat 15% fuel. That's plenty of power for the RCM. I fly the RCM first every year to get "current". It has flown with a Saito .40, .45, .50 and .56.
#7543
Member
Join Date: Mar 2005
Location: HightonVictoria, AUSTRALIA
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
RE: Welcome to Club SAITO !
Hi Guys,
I have a few Saito engines, but I need some help with my newly acquired Saito FA-80. I am about to strip it down, clean it up and reassemble and so on using new gasket kits which I have purchased. If I did this correctly (first post!) you will see pics of the kits.
Can someone please tell me, or provide a nice exploded carby diagram so I can figure out what each of the o-rings are used for, as well as the alloy ring and a plastic looking one. I know that when I strip the engine down, I'll probably figure it out, but I'd like to know ahead of time.
Also, it looks like there are a couple of parts in the engine gasket kit which look the same as those in the carby kit (large rubber o-ring and the alloy ring).
So, hope you guys can help me!
Thanks heaps!
I have a few Saito engines, but I need some help with my newly acquired Saito FA-80. I am about to strip it down, clean it up and reassemble and so on using new gasket kits which I have purchased. If I did this correctly (first post!) you will see pics of the kits.
Can someone please tell me, or provide a nice exploded carby diagram so I can figure out what each of the o-rings are used for, as well as the alloy ring and a plastic looking one. I know that when I strip the engine down, I'll probably figure it out, but I'd like to know ahead of time.
Also, it looks like there are a couple of parts in the engine gasket kit which look the same as those in the carby kit (large rubber o-ring and the alloy ring).
So, hope you guys can help me!
Thanks heaps!
#7544
My Feedback: (16)
RE: Welcome to Club SAITO !
The white plastic washer belongs with the choke which is most likely no longer on your engine.
The metal one goes onto the intake manifold first at the head end. Then there is a black O-ring (the one in the separate package that says "Viton" on it) that goes between the metal washer and the head.
There is another black O-ring that goes inside the carburetor where the intake slides in.
There us a little fat O-ring that goes inside the needle valve body (the brass piece with the external threads).
There are two more skinny O-rings. The larger one goes behind the nut that holds the needle valve friction device on.
The smaller skinny O-ring is most likely not used on your engine but on a new engine it belongs on the front end of the cam pivot shaft.
If it were me, I wouldn't open the carburetor gasket set. All the gaskets you really need at this point are in the engine gasket set package.
The metal one goes onto the intake manifold first at the head end. Then there is a black O-ring (the one in the separate package that says "Viton" on it) that goes between the metal washer and the head.
There is another black O-ring that goes inside the carburetor where the intake slides in.
There us a little fat O-ring that goes inside the needle valve body (the brass piece with the external threads).
There are two more skinny O-rings. The larger one goes behind the nut that holds the needle valve friction device on.
The smaller skinny O-ring is most likely not used on your engine but on a new engine it belongs on the front end of the cam pivot shaft.
If it were me, I wouldn't open the carburetor gasket set. All the gaskets you really need at this point are in the engine gasket set package.
#7545
Senior Member
My Feedback: (1)
Join Date: Mar 2005
Location: palm, FL
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
RE: Welcome to Club SAITO !
so can the saito 82 ,91 ,or 100 be reversed so i could eliminate the pusher prop???? i know that the 150 has a left turning cam gear you can get i need to know if there is one for any of these three engines
#7546
My Feedback: (16)
RE: Welcome to Club SAITO !
You would use the cam left cam gear from a Saito 182 if that is the situation.
http://www.horizonhobby.com/Products...dID=SAI182TD34
http://www.horizonhobby.com/Products...dID=SAI182TD34