old timers look here must be 50+ years only
![](/forum/images/badges/premium_member.png)
Thread Starter
![Default](images/icons/icon1.gif)
ET pilot
you show two birds that will have interesting stall characteristics and can be used to show stall characteristics the spad? will stall quickly with that sharp leading edge it is a real turbulence maker at higher angles of attack but the foamy bird should be very interesting to study I think it will surprise us. Please be sure to post it's flying characteristics with us.
you show two birds that will have interesting stall characteristics and can be used to show stall characteristics the spad? will stall quickly with that sharp leading edge it is a real turbulence maker at higher angles of attack but the foamy bird should be very interesting to study I think it will surprise us. Please be sure to post it's flying characteristics with us.
Last edited by donnyman; 01-30-2023 at 03:40 PM.
![](/forum/images/badges/premium_member.png)
![Default](images/icons/icon1.gif)
Hello Again All:
Back to when my dad was first flying- He lived in San Carlos, CA not too far south of San Francisco. He had one plane that looked like an Army something. He said that he would have to run onto highway 101 to get his plane off of the freeway.
The Livewire Cruiser would "float" as he said. The perfect trainer. No buddy boxes back then. He always built his planes heavy- extra coats of dope, etc. One Saturday his Ascender went into a flat spin...hard. The prop was broken and the landing gear came off.... that was it. He sold it when he was half way done building the Sultan. He started the build shortly before proportional radios came about. My folks took out a loan for his reed set-up. Once the proportional craze hit I think he was concerned about getting another loan if that went away. Also he would up going to work for a small (2 men) flooring company. Finally he just left the hobby,.
Now that I am retired, I plan to start with a Hobbico Superstar as my trainer. When I am finally flying & getting ready, I will send a copy of the Ascender II plans to a company to kit it up. That's my next build. Going to try & use the same colors too.
Keep the classic planes alive!
mightyhorn (Don Moore)
Vancouver, WA
Back to when my dad was first flying- He lived in San Carlos, CA not too far south of San Francisco. He had one plane that looked like an Army something. He said that he would have to run onto highway 101 to get his plane off of the freeway.
The Livewire Cruiser would "float" as he said. The perfect trainer. No buddy boxes back then. He always built his planes heavy- extra coats of dope, etc. One Saturday his Ascender went into a flat spin...hard. The prop was broken and the landing gear came off.... that was it. He sold it when he was half way done building the Sultan. He started the build shortly before proportional radios came about. My folks took out a loan for his reed set-up. Once the proportional craze hit I think he was concerned about getting another loan if that went away. Also he would up going to work for a small (2 men) flooring company. Finally he just left the hobby,.
Now that I am retired, I plan to start with a Hobbico Superstar as my trainer. When I am finally flying & getting ready, I will send a copy of the Ascender II plans to a company to kit it up. That's my next build. Going to try & use the same colors too.
Keep the classic planes alive!
mightyhorn (Don Moore)
Vancouver, WA
The following users liked this post:
GallopingGhostler (01-31-2023)
![](/forum/images/badges/premium_member.png)
My Feedback: (6)
![Default](images/icons/icon1.gif)
I just got a newsletter from Old School Models, here is what I read:
Secondly, our supply of CA hinges has dried up and it’s taken a bit of time a negotiation to find a substitute. I’ve found another supplier that I hope will be a good replacement.
But the biggest problem has been the loss of Sig Mfg. There's a lot of rumors going around as to what's going on with them - well I can tell you that as of 1/31, they have ceased all manufacturing and what's left will be an importer of ARF kits, moving somewhere up in the Chicago area. That's a shame, as there's a massive history and knowledge base that's apparently going to be lost. As you may or may not know, I purchase a good deal of items from Sig which are included in our own kits. Some wood, landing gear (music) wire, nose gear assemblies, etc. Their shutdown has sent me scrambling to find other suppliers. I'm well on the way to solving some of these, but let's just say it's taking ALL of my free time to make sure things are still shipping on time.
Mike
Secondly, our supply of CA hinges has dried up and it’s taken a bit of time a negotiation to find a substitute. I’ve found another supplier that I hope will be a good replacement.
But the biggest problem has been the loss of Sig Mfg. There's a lot of rumors going around as to what's going on with them - well I can tell you that as of 1/31, they have ceased all manufacturing and what's left will be an importer of ARF kits, moving somewhere up in the Chicago area. That's a shame, as there's a massive history and knowledge base that's apparently going to be lost. As you may or may not know, I purchase a good deal of items from Sig which are included in our own kits. Some wood, landing gear (music) wire, nose gear assemblies, etc. Their shutdown has sent me scrambling to find other suppliers. I'm well on the way to solving some of these, but let's just say it's taking ALL of my free time to make sure things are still shipping on time.
Mike
The following users liked this post:
GallopingGhostler (02-01-2023)
![Default](images/icons/icon1.gif)
Last I heard, they were reorganizing. Herb took over last June.
https://sigmfg.com/pages/sig-not-closing
I had swung by there in 21 and had a tour with the new owner and he had high ambitions to get the company back on track. New laser machines were being installed, had the kit production all revamped and was restocking a lot of kits. He did have issues with getting balsa though, one of his shipments was confiscated by the DEA and the drilled the crap out of it looking fro drugs, ruining the entire truck load. I don't know what happened since, except that the 2022 fly in was cancelled.
https://sigmfg.com/pages/sig-not-closing
I had swung by there in 21 and had a tour with the new owner and he had high ambitions to get the company back on track. New laser machines were being installed, had the kit production all revamped and was restocking a lot of kits. He did have issues with getting balsa though, one of his shipments was confiscated by the DEA and the drilled the crap out of it looking fro drugs, ruining the entire truck load. I don't know what happened since, except that the 2022 fly in was cancelled.
Senior Member
My Feedback: (3)
![Default](images/icons/icon1.gif)
EZ HINGE substitute...?
Take a rotary rasp bit on the right type of plastic and make it fuzzy..
Can anyone weigh in with what is the correct plastic to make our own EZ HINGES with...?
Take a rotary rasp bit on the right type of plastic and make it fuzzy..
Can anyone weigh in with what is the correct plastic to make our own EZ HINGES with...?
![](/forum/images/badges/premium_member.png)
My Feedback: (6)
![Default](images/icons/icon1.gif)
![Default](images/icons/icon1.gif)
I was wondering about laminating a piece of doculam between two sheets of tyvek paper.
![](/forum/images/badges/premium_member.png)
Join Date: Apr 2008
Location: Measnes, La Creuse, France.
Posts: 2,165
Received 161 Likes
on
135 Posts
![Default](images/icons/icon1.gif)
I thought that you gentlemen might be interested in seeing this. Those of you with military experience should not be offended by the language which is understandable under the circumstances. Or at least, that's what I think!
![Default](images/icons/icon1.gif)
While sitting on the settee nursing a back strain this morning, I came across this:
.
I've seen it before and yes it's not a fee flight model but it's still very entertaining. I lived near Ilfracombe and Barnstaple for fourteen years. Sorry about the ads.
I've seen it before and yes it's not a fee flight model but it's still very entertaining. I lived near Ilfracombe and Barnstaple for fourteen years. Sorry about the ads.
![](/forum/images/badges/premium_member.png)
My Feedback: (6)
![Default](images/icons/icon1.gif)
I thought that you gentlemen might be interested in seeing this. Those of you with military experience should not be offended by the language which is understandable under the circumstances. Or at least, that's what I think!
https://www.youtube.com/watch?v=4iOoiEbtf2w
https://www.youtube.com/watch?v=4iOoiEbtf2w
![Big Grin](images/smilies/biggrin.gif)
Last edited by FlyerInOKC; 02-05-2023 at 07:20 AM.
![Default](images/icons/icon1.gif)
I thought that you gentlemen might be interested in seeing this. Those of you with military experience should not be offended by the language which is understandable under the circumstances. Or at least, that's what I think!
https://www.youtube.com/watch?v=4iOoiEbtf2w
https://www.youtube.com/watch?v=4iOoiEbtf2w
The following users liked this post:
David John Davis (02-05-2023)
![](/forum/images/badges/premium_member.png)
Thread Starter
![Default](images/icons/icon1.gif)
Speaking of farmers, We were flying to several airports to post for sale signs for the plane we were flying in, on the way back to base we spotted a very big tractor hauling a disc plow, we went down for a closer look only to pass over the tractor from the rear only a few feet above it the right wing look about two feet over the cab, we were close, as I looked back the driver was jumping out of the tractor, I hope he took it out of gear because he was pretty close to the fence in front of him. my pilot stayed real low and poured the coal to the old bird afraid he may get our registration number. low flying is a blast.
![](/forum/images/badges/premium_member.png)
Thread Starter
![Default](images/icons/icon1.gif)
I agree with you that life could not be better! Although I am young at 59 and planning on retiring soon. What makes me look forward to it is the fact I will be doing what you are doing (laughing) going to the field more often and during off peak hours and fly as much as I can!
The following users liked this post:
ETpilot (02-14-2023)
Senior Member
![Default](images/icons/icon1.gif)
like going to the doctor
![Roll Eyes (Sarcastic)](images/smilies/rolleyes.gif)
![](/forum/images/badges/premium_member.png)
My Feedback: (6)
![Default](images/icons/icon1.gif)
I have known several people over the years who said the same thing in the first months of retirement: I'm so busy now I don't know how I found the time to work for a living!
![](/forum/images/badges/premium_member.png)
Thread Starter
![Default](images/icons/icon1.gif)
Doctors........ I submitted claims to the VA for agent orange damage and all I have done this month is visit doctors six so far and I have a appointment at ten today and three or four a week from now, not to mention the paperwork I am (almost) ready to get a job it seems easier. and the pills..................................
The following users liked this post:
bisco (02-14-2023)
The following users liked this post:
bisco (02-14-2023)
The following users liked this post:
bisco (02-14-2023)
![](/forum/images/badges/premium_member.png)
Thread Starter
![Default](images/icons/icon1.gif)
I do not know about a man made flu but I have been poked, prodded, flipped, dipped, ekg'd, xrayed, rubbed, and looked at and I am sick and tired of it. and rejected a finger wave.
but have to make a appearance for a possible colonoscopy in a week or two. all over the agent orange thing, Two friends has died from it, both with leukemia.
One thing the last doctor was a women, she was wonderful!
I intend to just relax for the next few days.
Flyer.......... did you ever build your tiger 60 ? I was just reading the tiger thread.
but have to make a appearance for a possible colonoscopy in a week or two. all over the agent orange thing, Two friends has died from it, both with leukemia.
One thing the last doctor was a women, she was wonderful!
I intend to just relax for the next few days.
Flyer.......... did you ever build your tiger 60 ? I was just reading the tiger thread.
The following users liked this post:
bisco (02-16-2023)
![](/forum/images/badges/premium_member.png)
My Feedback: (6)
![Default](images/icons/icon1.gif)
It's about half build right now. It will get done at some point. I'm thinking of retiring next January. I talked to a guy with a NIB first gen. Wankel today. He wanted $300 I passed on it. Maybe you should consider selling some of yours?