ESM 50cc ME-109
#1101
My Feedback: (1)
http://www.shindinmachine.com/ME109/ME109.html
#1106
in my ESM me 109 50CC i fixed the cowl to its final place first and then i meaured the spinner to be exactly with the nose of the cowl, while the glue between the inside cylinder and the firewall started to dry. i putted some tape betwwen the spinner and the nose cowl to keep the in place.
Hope it helps...
#1111
Junior Member
Join Date: Oct 2011
Location: PADOVA, ITALY
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Ciao Ragazzi
Anche io ho iniziato a montare il mio 109 e volevo sapere quanto peso si è aggiunto per bilanciare il modello e se il cg segnata nel manuale di istruzioni è giusto ??
Mi dispiace per il mio inglese tradotto con google
.
Anche io ho iniziato a montare il mio 109 e volevo sapere quanto peso si è aggiunto per bilanciare il modello e se il cg segnata nel manuale di istruzioni è giusto ??
Mi dispiace per il mio inglese tradotto con google
.
#1112
I don't know what you said, Ciao, but your doing good work. I noticed that the ME 109 is no longer shown on the TBM website. BTW, what tail wheel works with the Sierra fixed gear for the 109 that is light and looks good.
Last edited by LtMash1A; 04-05-2015 at 07:18 PM.
#1113
Junior Member
Join Date: Oct 2011
Location: PADOVA, ITALY
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Hello Guys
Also I have started to mount my 109 and I wanted to know how much weight was added to balance the model and if the cg marked in the instruction manual is right ??
I'm sorry for my english translated with google
Also I have started to mount my 109 and I wanted to know how much weight was added to balance the model and if the cg marked in the instruction manual is right ??
I'm sorry for my english translated with google
#1114
My Feedback: (7)
Join Date: Jul 2005
Location: PA
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Hi all..
I see that this thread has not been active in a while.anyway,Here is my setup...DLE55RA,Sierra air Retracts, Sierra Tail scale fork,3 TBM Ultra Power 2 cell Li-ion 7.4 3400mah. 2 for plane and 1 for ignition, Smart-Fly Sport Plus with Optical built-in Ignition Cutoff,HiTec HS-5685 HV Ultra Torque,20X10 3 blade WWII prop.
CG is at 140mm balance perfect! and 143mm a little nose heavy. No Added dead weight! I would like to Thank all! This thread helped me tremendously thru my build!
Here are some Pics.. No test flight yet! just finnished last month and the weather here in NY has been Very cold and snow.
Thanks,Vincent
I see that this thread has not been active in a while.anyway,Here is my setup...DLE55RA,Sierra air Retracts, Sierra Tail scale fork,3 TBM Ultra Power 2 cell Li-ion 7.4 3400mah. 2 for plane and 1 for ignition, Smart-Fly Sport Plus with Optical built-in Ignition Cutoff,HiTec HS-5685 HV Ultra Torque,20X10 3 blade WWII prop.
CG is at 140mm balance perfect! and 143mm a little nose heavy. No Added dead weight! I would like to Thank all! This thread helped me tremendously thru my build!
Here are some Pics.. No test flight yet! just finnished last month and the weather here in NY has been Very cold and snow.
Thanks,Vincent
Last edited by ENZ5573; 02-17-2016 at 04:38 AM.
#1116
My Feedback: (7)
Join Date: Jul 2005
Location: PA
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
If anyone is wondering where i got those Guns from! i made them myself. i made 3 sets.1 for me and 2 sets for my buddys.
I am a CNC programmer and have been working in a Machine shop since i was 15 yours old..over 25 years!
Thanks,Vincent
I am a CNC programmer and have been working in a Machine shop since i was 15 yours old..over 25 years!
Thanks,Vincent
#1119
I recently made these MG 131 barrels for my plane at Shapeways. I designed them so that I could pass a machine gun light plug through the barrel.I have not yet installed the barrels yet and they won't be as long as in the first photo.
Last edited by tevans55; 03-10-2016 at 07:18 PM.
#1120
I am making one of the planes that Erich Hartmann flew on the eastern front in a winter white scheme. Here is a shot of my new "Erich" pilot. Lyle Vasser 3D printed the face from 3 photos. I also bought the body unpainted and just finished getting him ready for his first mission.
#1121
My Feedback: (60)
Join Date: Dec 2001
Location: Litchfield Park,
AZ
Posts: 7,678
Likes: 0
Received 27 Likes
on
25 Posts
I am making one of the planes that Erich Hartmann flew on the eastern front in a winter white scheme. Here is a shot of my new "Erich" pilot. Lyle Vasser 3D printed the face from 3 photos. I also bought the body unpainted and just finished getting him ready for his first mission.