Picked up one of these NIB. Started yesterday by using Eastwood 2pt clearcoat. Makes a nice glossy hard shell finish. Any pointers on getting the flaps/slats wired up?
Picked up one of these NIB. Started yesterday by using Eastwood 2pt clearcoat. Makes a nice glossy hard shell finish. Any pointers on getting the flaps/slats wired up?
Tom,
In Jeti I set my wing up with 4 flaps.
I use 3 flight modes, Flaps up, half, and full.
Flaps are standard… controlled by flight modes and butterfly/flap menu in S for all separate flight modes
Split the slat Y into 2 separate channels 1 for left slat servos and 1 for right slat servos.
In butterfly/flap menu use:
S1 for left flap
S2 for left slat (both servos on the Y)
S3 for right flap
S4 for right slat (both servos on the Y)
…or any combination that makes sense to you. The idea is you can set whatever you want for flap and slat settings for each flap flight mode.
Two more flights on mine today. X95 and Jeti 12A. I set the stick priority to 125 and added 30% expo on ailerons and elevator. .....Nailed it! It is now rock solid.