Carl Goldberg Ultimate 10-300 Brotherhood.
06-26-2017, 07:54 AM
#2001
Mine is in pieces. I found they don't fly very far, for very long when the engine quits just after takeoff. Stupid throttle arm screw loosened on the Gemini and when I reduced power after climbout, the throttle completely closed killing the engine. The front is smashed, but the rest is still intact. Wings will need to be opened to replace the tabs used to secure the struts. The Cabane is busted out, so basically everything forward of the cockpit needs to be rebuilt. It was the second flight of the day, and the engine was running great, but it was very windy.
06-27-2017, 02:59 AM
#2004
My Feedback: (44)
Hi Guys
I bought my first Ultimate at a swap meet and loved it. Now I am going to try my hand at building one. I bought a kit from some one on line a week ago. I was organizing it this after noon and I have found that I am missing two of the four sheets required for sheet #5314.
Does anyone have a pair of them that they will not be using? I will purchase them from you if need be. If not does anyone know where I can get such an item?
Thanks guys
Clifford
I bought my first Ultimate at a swap meet and loved it. Now I am going to try my hand at building one. I bought a kit from some one on line a week ago. I was organizing it this after noon and I have found that I am missing two of the four sheets required for sheet #5314.
Does anyone have a pair of them that they will not be using? I will purchase them from you if need be. If not does anyone know where I can get such an item?
Thanks guys
Clifford
07-02-2017, 04:16 AM
#2006
Junior Member
Join Date: Jun 2017
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
07-02-2017, 04:19 AM
#2007
Junior Member
Join Date: Jun 2017
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I did....the problem was that my email account had two "Sent " files which I did not know...I thought that there was only one and when you sent the plans files my box was too full to hold your file so it kicked it back to you.....so I still do not have what you sent me but this was my fault and not yours.....
But I do appreciate your effort and thank you for it....
I am keeping my email box as clear as I can in case you wish to try again.
Clifford
But I do appreciate your effort and thank you for it....
I am keeping my email box as clear as I can in case you wish to try again.
Clifford
07-02-2017, 05:32 AM
#2008
Senior Member
My Feedback: (10)
Twin_Flyer, Don't forget about me!!! ;-) [email protected] Any help is much appreciated on the former outlines.
Thanks,
Jason
Thanks,
Jason
07-03-2017, 09:00 AM
#2009
My Feedback: (1)
Finally finished the Ultimate! I had it framed up a couple winters ago, but sat for the longest time in the bones. This past March I was motivated and got the covering done; the scheme was basically borrowed from an Aeroworks plane I saw online. In June it was nice enough outside to paint the cowl, wheel pants, cabanes, and landing gear. Used PPG Concept single-stage (there are recipes online to match Ultracote in this case, or Monokote). The dash was cut from 1/8" ABS plastic found on eBay; and purchased the gauge bezels from "i fly tailies". The rivet and switch detail are just small drops of fabric paint. The inside of the cockpit was sprayed with Krylon granite texture paint. It's powered with a Saito FG-21. Hope to maiden it later this week!
07-03-2017, 09:46 AM
#2011
My Feedback: (1)
Fiberglass Specialties Inc Catalog
I just ordered one a few months ago and they're really nice - one piece (no seam to finish), and minimal prep to paint.
07-04-2017, 02:13 PM
#2012
Junior Member
Join Date: Jun 2017
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
07-04-2017, 02:16 PM
#2013
Junior Member
Join Date: Jun 2017
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
But thank you for the great sugestion
Clifford
Any way , I am almost done with the Horizontal Stablizer....Just need to round the corneres and mark for the hinges and drill the pilot holes.
I got the Elevators almost done as well...just need to get the corner gussets in and the holes drilled for the hinges as well....
07-08-2017, 01:06 PM
#2015
Junior Member
Join Date: Jul 2017
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I have one for sale!
Yes - I must be crazy, but I'm selling mine I'm in Aylesbury in the UK
ebay item no. 201980650764
would be great to pass it on to one of you guys - I really enjoyed flying it - it was a proper occasion to get it in the air - I had a saito 180 running 30% - flew like it was on rails!!!
ebay item no. 201980650764
would be great to pass it on to one of you guys - I really enjoyed flying it - it was a proper occasion to get it in the air - I had a saito 180 running 30% - flew like it was on rails!!!
07-12-2017, 10:50 AM
#2016
My Feedback: (1)
Join Date: Sep 2003
Location: Talamanca de JaramaMadrid, SPAIN
Posts: 583
Received 4 Likes
on
4 Posts
Finally finished the Ultimate! I had it framed up a couple winters ago, but sat for the longest time in the bones. This past March I was motivated and got the covering done; the scheme was basically borrowed from an Aeroworks plane I saw online. In June it was nice enough outside to paint the cowl, wheel pants, cabanes, and landing gear. Used PPG Concept single-stage (there are recipes online to match Ultracote in this case, or Monokote). The dash was cut from 1/8" ABS plastic found on eBay; and purchased the gauge bezels from "i fly tailies". The rivet and switch detail are just small drops of fabric paint. The inside of the cockpit was sprayed with Krylon granite texture paint. It's powered with a Saito FG-21. Hope to maiden it later this week!
Your finished Ultimate is superb! Congrats on a great job and best luck on maiden.
Best Regards.
07-12-2017, 10:59 AM
#2017
My Feedback: (1)
Join Date: Sep 2003
Location: Talamanca de JaramaMadrid, SPAIN
Posts: 583
Received 4 Likes
on
4 Posts
We wish you good luck with the building and then with the maiden and do not doubt getting to us with any doubt or problem you may get during the process.
Best Regards.
maukaonyx # 01
JohnMcGowan # 02
Cub Man # 03
DanS # 04
u2builder # 05
CRJDriver # 06
alfredbmor # 07
captinjohn # 08
yekots # 09
everwood # 10
JNorton # 11
Tailskid # 12
Crash Campbell # 13
frequent flyer # 14
daveopam # 15
VCScott # 16
PropWash # 17
eaticus # 18
mistermnkim # 19
Zebra One # 20
JimboGreek # 21
tony 0707 # 22
pushinoldrc # 23
bigal126 # 24
Steve Campbell # 25
raubold # 26
Revy # 27
twn # 28
vt-flier # 29
rk2648 # 30
Francisco Ortiz # 31
JohnB 96041 # 32
David Agar # 33
IMaflyer # 34
Reefrus # 35
Jduran157 # 36
Bipeguy03 # 37
SRQFlyer # 38
Charlie111 # 39
Flygilmore # 40
Falling leaf # 41
ericzombie # 42
Pacomb # 43
Atlanta 60 # 44
Gunneredwards # 45
braddock VC # 46
Cyberfyn # 47
Mrshea # 48
Peternj # 49
WarbirdAirRacer # 50
Abbott915 # 51
ArcticCatRider # 52
THEJADEGROUP # 53
Jjoos99 # 54
MajorTomski # 55
Twin Flyer # 56
72 #57
George Waldrop #58
TripleDeucer # 59
Johnny Zero # 60
Garthwood # 61
Moeandicy # 62
stefanP # 63
Helichong # 64
Jsarsonj # 65
andizzle # 66
Killionaire # 67
OntAeronut # 68
drbenz # 69
Eddie James # 70
CanDo # 71
Thunderbolt P47 # 72
KC10Chief # 73
TheGreatBoo # 74
Noginblue # 75
boisebiker # 76
J. Paul Saure # 77
Acrostar # 78
sirzepp # 79
Kconn3 # 80
suburban95 # 81
BigTom802l # 82
Gary Binnie # 83
dmarusa # 84
westernstar # 85
scale only 4 me # 86
thisstrangeengine # 87
smkrcflyer # 88
mikmerl # 89
kwg # 90
pt19 flyer # 91
thnilsen # 92
nick1881 # 93
jescardin # 94
Vince Wickline # 95
bodybuildr # 96
mnmopar # 97
trippergreenfeet # 98
Knight_74 # 99
toolmaker7341 # 100
skyracer068 # 101
maekju # 102
mattnew # 103
ktmfrank # 104
jglemba # 105
Gray Beard # 106
FSXBA3P-MAN # 107
Dinkster75 # 108
ThunderBoat42 # 109
mRqS #110
got2retire # 111
Jim Oliver # 112
twistman # 113
MFIGHT43 # 114
Garbiray # 115
drac1 # 116
srecker # 117
hakesm # 118
rmoss94 # 119
tim allen # 120
tejasnumu # 121
Buzz-RCU # 122
vogelm1 # 123
dickster # 124
ultimate1 # 125
ohno1 # 126
Ragonzo # 127
07-12-2017, 12:06 PM
#2019
My Feedback: (1)
Join Date: Sep 2003
Location: Talamanca de JaramaMadrid, SPAIN
Posts: 583
Received 4 Likes
on
4 Posts
Then you will have to care so as to enjoy your magnificent plane for as many years as possible.
Best Regards from Spain.
07-13-2017, 04:27 AM
#2020
Junior Member
Join Date: Jun 2017
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Hi
Please add me into the numbered list of owners.
I had one which I purchased at a swap meet and I only had it for 16 seconds of the madien flight before she hit a pilot station and splintered to death!
I was SOOOOOO disheartende with this I wanted to give up flying........But no.....three months later I have found a kit and am now in the process of building!
OMG! I must be crazy.....
Clifford
Please add me into the numbered list of owners.
I had one which I purchased at a swap meet and I only had it for 16 seconds of the madien flight before she hit a pilot station and splintered to death!
I was SOOOOOO disheartende with this I wanted to give up flying........But no.....three months later I have found a kit and am now in the process of building!
OMG! I must be crazy.....
Clifford
07-13-2017, 04:49 AM
#2021
My Feedback: (64)
Join Date: Jan 2005
Location: Clarklake,
MI
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Hello all could you put me on the list I have a NIB kit on the shelf ready to build I'm at the age where I better do this soon or my kids will sell my stuff pennies on the dollar. Hording a CG bucker It's a old person thing.
07-15-2017, 03:03 PM
#2023
My Feedback: (1)
Join Date: Sep 2003
Location: Talamanca de JaramaMadrid, SPAIN
Posts: 583
Received 4 Likes
on
4 Posts
Hi
Please add me into the numbered list of owners.
I had one which I purchased at a swap meet and I only had it for 16 seconds of the madien flight before she hit a pilot station and splintered to death!
I was SOOOOOO disheartende with this I wanted to give up flying........But no.....three months later I have found a kit and am now in the process of building!
OMG! I must be crazy.....
Clifford
Please add me into the numbered list of owners.
I had one which I purchased at a swap meet and I only had it for 16 seconds of the madien flight before she hit a pilot station and splintered to death!
I was SOOOOOO disheartende with this I wanted to give up flying........But no.....three months later I have found a kit and am now in the process of building!
OMG! I must be crazy.....
Clifford
"truckermusic" you are now new member and #128 is you brotherhood number!. You may writte a firm in your RC Universe profile and include your brotherhood identification as many we do.
We wish you good luck with the building and then with the maiden of the new Ultimate and do not doubt getting to us with any doubt or problem you may get during the process.
Best Regards.
maukaonyx # 01
JohnMcGowan # 02
Cub Man # 03
DanS # 04
u2builder # 05
CRJDriver # 06
alfredbmor # 07
captinjohn # 08
yekots # 09
everwood # 10
JNorton # 11
Tailskid # 12
Crash Campbell # 13
frequent flyer # 14
daveopam # 15
VCScott # 16
PropWash # 17
eaticus # 18
mistermnkim # 19
Zebra One # 20
JimboGreek # 21
tony 0707 # 22
pushinoldrc # 23
bigal126 # 24
Steve Campbell # 25
raubold # 26
Revy # 27
twn # 28
vt-flier # 29
rk2648 # 30
Francisco Ortiz # 31
JohnB 96041 # 32
David Agar # 33
IMaflyer # 34
Reefrus # 35
Jduran157 # 36
Bipeguy03 # 37
SRQFlyer # 38
Charlie111 # 39
Flygilmore # 40
Falling leaf # 41
ericzombie # 42
Pacomb # 43
Atlanta 60 # 44
Gunneredwards # 45
braddock VC # 46
Cyberfyn # 47
Mrshea # 48
Peternj # 49
WarbirdAirRacer # 50
Abbott915 # 51
ArcticCatRider # 52
THEJADEGROUP # 53
Jjoos99 # 54
MajorTomski # 55
Twin Flyer # 56
72 #57
George Waldrop #58
TripleDeucer # 59
Johnny Zero # 60
Garthwood # 61
Moeandicy # 62
stefanP # 63
Helichong # 64
Jsarsonj # 65
andizzle # 66
Killionaire # 67
OntAeronut # 68
drbenz # 69
Eddie James # 70
CanDo # 71
Thunderbolt P47 # 72
KC10Chief # 73
TheGreatBoo # 74
Noginblue # 75
boisebiker # 76
J. Paul Saure # 77
Acrostar # 78
sirzepp # 79
Kconn3 # 80
suburban95 # 81
BigTom802l # 82
Gary Binnie # 83
dmarusa # 84
westernstar # 85
scale only 4 me # 86
thisstrangeengine # 87
smkrcflyer # 88
mikmerl # 89
kwg # 90
pt19 flyer # 91
thnilsen # 92
nick1881 # 93
jescardin # 94
Vince Wickline # 95
bodybuildr # 96
mnmopar # 97
trippergreenfeet # 98
Knight_74 # 99
toolmaker7341 # 100
skyracer068 # 101
maekju # 102
mattnew # 103
ktmfrank # 104
jglemba # 105
Gray Beard # 106
FSXBA3P-MAN # 107
Dinkster75 # 108
ThunderBoat42 # 109
mRqS #110
got2retire # 111
Jim Oliver # 112
twistman # 113
MFIGHT43 # 114
Garbiray # 115
drac1 # 116
srecker # 117
hakesm # 118
rmoss94 # 119
tim allen # 120
tejasnumu # 121
Buzz-RCU # 122
vogelm1 # 123
dickster # 124
ultimate1 # 125
ohno1 # 126
Ragonzo # 127
truckermusic # 128
07-15-2017, 03:14 PM
#2024
My Feedback: (1)
Join Date: Sep 2003
Location: Talamanca de JaramaMadrid, SPAIN
Posts: 583
Received 4 Likes
on
4 Posts
We hope you keep us all updated when you go up with the building and do not doubt getting to us with any doubt or problem you may get during the process. It would also be interesting to know about the CG Bucker when you build it.
Best Regards.
maukaonyx # 01
JohnMcGowan # 02
Cub Man # 03
DanS # 04
u2builder # 05
CRJDriver # 06
alfredbmor # 07
captinjohn # 08
yekots # 09
everwood # 10
JNorton # 11
Tailskid # 12
Crash Campbell # 13
frequent flyer # 14
daveopam # 15
VCScott # 16
PropWash # 17
eaticus # 18
mistermnkim # 19
Zebra One # 20
JimboGreek # 21
tony 0707 # 22
pushinoldrc # 23
bigal126 # 24
Steve Campbell # 25
raubold # 26
Revy # 27
twn # 28
vt-flier # 29
rk2648 # 30
Francisco Ortiz # 31
JohnB 96041 # 32
David Agar # 33
IMaflyer # 34
Reefrus # 35
Jduran157 # 36
Bipeguy03 # 37
SRQFlyer # 38
Charlie111 # 39
Flygilmore # 40
Falling leaf # 41
ericzombie # 42
Pacomb # 43
Atlanta 60 # 44
Gunneredwards # 45
braddock VC # 46
Cyberfyn # 47
Mrshea # 48
Peternj # 49
WarbirdAirRacer # 50
Abbott915 # 51
ArcticCatRider # 52
THEJADEGROUP # 53
Jjoos99 # 54
MajorTomski # 55
Twin Flyer # 56
72 #57
George Waldrop #58
TripleDeucer # 59
Johnny Zero # 60
Garthwood # 61
Moeandicy # 62
stefanP # 63
Helichong # 64
Jsarsonj # 65
andizzle # 66
Killionaire # 67
OntAeronut # 68
drbenz # 69
Eddie James # 70
CanDo # 71
Thunderbolt P47 # 72
KC10Chief # 73
TheGreatBoo # 74
Noginblue # 75
boisebiker # 76
J. Paul Saure # 77
Acrostar # 78
sirzepp # 79
Kconn3 # 80
suburban95 # 81
BigTom802l # 82
Gary Binnie # 83
dmarusa # 84
westernstar # 85
scale only 4 me # 86
thisstrangeengine # 87
smkrcflyer # 88
mikmerl # 89
kwg # 90
pt19 flyer # 91
thnilsen # 92
nick1881 # 93
jescardin # 94
Vince Wickline # 95
bodybuildr # 96
mnmopar # 97
trippergreenfeet # 98
Knight_74 # 99
toolmaker7341 # 100
skyracer068 # 101
maekju # 102
mattnew # 103
ktmfrank # 104
jglemba # 105
Gray Beard # 106
FSXBA3P-MAN # 107
Dinkster75 # 108
ThunderBoat42 # 109
mRqS #110
got2retire # 111
Jim Oliver # 112
twistman # 113
MFIGHT43 # 114
Garbiray # 115
drac1 # 116
srecker # 117
hakesm # 118
rmoss94 # 119
tim allen # 120
tejasnumu # 121
Buzz-RCU # 122
vogelm1 # 123
dickster # 124
ultimate1 # 125
ohno1 # 126
Ragonzo # 127
truckermusic # 128
equip # 129
07-19-2017, 07:15 AM
#2025
Junior Member
Join Date: Jun 2017
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Cg ultimate build
Ok. I had last week off.of building because i got a spacewalker for.20.bucks and i wanted to see her fly. It.took all week to build.and repair.jer but she madiened last.sat.and she flew wonderful.
so now i am back on the ultimate. I got the first set of wings cut out and dry fitted. Now i am trying to figure out nust how to glue them up and keep them straight and true.
clifford
so now i am back on the ultimate. I got the first set of wings cut out and dry fitted. Now i am trying to figure out nust how to glue them up and keep them straight and true.
clifford