Welcome to Club SAITO !
RE: Welcome to Club SAITO !
"All things electric are powered by smoke contained within them. When all their smoke is almost used up, the remainder escapes out and the device is dead, usually forever"
Famous quote by Benjamin Edison, or was it Thomas Franklin? [8D]
Famous quote by Benjamin Edison, or was it Thomas Franklin? [8D]
My Feedback: (12)
RE: Welcome to Club SAITO !
Some motors are very cheap. In fact, I'm looking at $12-13 motors right now for an F-16 foamy project. The biggest expense in electrics are batteries IMO. That is, unless you only get one battery and get about one flight per hour on it.
What's so cool about this hobby is that there are so many directions to go. I know some people who hate 4-strokes and only stick with 2-strokes and vise versa. Some are only into gas or electric power. Personally, I like 2 and 4 stroke glow engines and will never give those up. When my fellow club members raz me and say things like slimer, I just laugh and say that I like the smell of glow fuel in the morning (and afternoon, and evening). I like glow engines, period.
However, I do like to have at least one electric airplane on hand. I must say, there is a convenience factor here. Simply plug and play. Sometimes I just don't have the time to spend a day or half day at the field so if I can throw an electric in the trunk of my car, stop by a park on the way to work (or something), I can get one two flights in in 30 minutes or so.
Getting back to my F-16 project, I decided to upgrade the EDF unit from a 5 blade to a 10 blade fan. This will eliminate that annoying mosquito sound that most (if not all) electrics have and give that cool turbine sound. In the process, I've come to realize you can't just put a power package together and not smoke something. There is a lot of math that goes into this. I personally think this is pretty cool and give the electric gurus a lot of respect for their knowledge on these things.
Below is a link showing the difference between 5 blade and 10 blade EDF units.
http://m.youtube.com/watch?v=qvWGDk1htjw
And now back to Saito's! Sorry for the diversion.
What's so cool about this hobby is that there are so many directions to go. I know some people who hate 4-strokes and only stick with 2-strokes and vise versa. Some are only into gas or electric power. Personally, I like 2 and 4 stroke glow engines and will never give those up. When my fellow club members raz me and say things like slimer, I just laugh and say that I like the smell of glow fuel in the morning (and afternoon, and evening). I like glow engines, period.
However, I do like to have at least one electric airplane on hand. I must say, there is a convenience factor here. Simply plug and play. Sometimes I just don't have the time to spend a day or half day at the field so if I can throw an electric in the trunk of my car, stop by a park on the way to work (or something), I can get one two flights in in 30 minutes or so.
Getting back to my F-16 project, I decided to upgrade the EDF unit from a 5 blade to a 10 blade fan. This will eliminate that annoying mosquito sound that most (if not all) electrics have and give that cool turbine sound. In the process, I've come to realize you can't just put a power package together and not smoke something. There is a lot of math that goes into this. I personally think this is pretty cool and give the electric gurus a lot of respect for their knowledge on these things.
Below is a link showing the difference between 5 blade and 10 blade EDF units.
http://m.youtube.com/watch?v=qvWGDk1htjw
And now back to Saito's! Sorry for the diversion.
RE: Welcome to Club SAITO !
I have all the powerplant variety except 4-stroke gas. That seems to be out of my financial reach thus far. But I enjoy them all.
An interesting thing about glow fuel smell: I ran an engine with zero nitro last year and the smell was very different, without the nitro, it smelled like alcohol. It seems that the nitro smell overcomes the alcohol smell if it is present in the fuel. With zero nitro, the place smelled like a distillery.
An interesting thing about glow fuel smell: I ran an engine with zero nitro last year and the smell was very different, without the nitro, it smelled like alcohol. It seems that the nitro smell overcomes the alcohol smell if it is present in the fuel. With zero nitro, the place smelled like a distillery.
RE: Welcome to Club SAITO !
ORIGINAL: Hobbsy
You'll not find me lowering the compression, my 1.50 has 15.5 to 1 compression and my old .80 has 14.56 to 1. Compression ==torque. I say, why reduce the torque and efficiency just so you can run higher nitro further reducing efficiency and increasing fuel consumption. That's just me though.
You'll not find me lowering the compression, my 1.50 has 15.5 to 1 compression and my old .80 has 14.56 to 1. Compression ==torque. I say, why reduce the torque and efficiency just so you can run higher nitro further reducing efficiency and increasing fuel consumption. That's just me though.
The nitro actually adds more torque than lowering the compression ratio, but yes at a much lower efficiency.
RE: Welcome to Club SAITO !
ORIGINAL: hsukaria
I have all the powerplant variety except 4-stroke gas. That seems to be out of my financial reach thus far. But I enjoy them all.
An interesting thing about glow fuel smell: I ran an engine with zero nitro last year and the smell was very different, without the nitro, it smelled like alcohol. It seems that the nitro smell overcomes the alcohol smell if it is present in the fuel. With zero nitro, the place smelled like a distillery.
I have all the powerplant variety except 4-stroke gas. That seems to be out of my financial reach thus far. But I enjoy them all.
An interesting thing about glow fuel smell: I ran an engine with zero nitro last year and the smell was very different, without the nitro, it smelled like alcohol. It seems that the nitro smell overcomes the alcohol smell if it is present in the fuel. With zero nitro, the place smelled like a distillery.
Like a lot of things, an adulterant often makes the smell better, especially in the morning, or evening, or anytime.
Senior Member
RE: Welcome to Club SAITO !
ORIGINAL: Sport_Pilot
The nitro actually adds more torque than lowering the compression ratio, but yes at a much lower efficiency.
ORIGINAL: Hobbsy
You'll not find me lowering the compression, my 1.50 has 15.5 to 1 compression and my old .80 has 14.56 to 1. Compression ==torque. I say, why reduce the torque and efficiency just so you can run higher nitro further reducing efficiency and increasing fuel consumption. That's just me though.
You'll not find me lowering the compression, my 1.50 has 15.5 to 1 compression and my old .80 has 14.56 to 1. Compression ==torque. I say, why reduce the torque and efficiency just so you can run higher nitro further reducing efficiency and increasing fuel consumption. That's just me though.
The nitro actually adds more torque than lowering the compression ratio, but yes at a much lower efficiency.
With CDI you can raise both CR & nitro content for a BIG HP boost.
My 12.77:1 CR Saito FA180HC CDI BBC spins a Dynathgrust 18 X 8 @ 8850 RPM for just under 4HP burning 30% O'Donnell Speed Blend fuel lit of @ 35° BTDC by an old (irca 1997) C&H MK I Synchrospark CDI..
Still consumes about the same volume of fuel as the stock FA180 does W/15% glow fuel running on glow ignition. About 42% HP increase.
Senior Member
Join Date: Apr 2010
Location: Cairns, AUSTRALIA
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
RE: Welcome to Club SAITO !
Interesting, I am also finding that fuel burn (no matter what the nitro content) seems to be about the same. Increase in rpm doesn't always equate to increase in fuel burn if the nitro content is moved up. Another point to consider is that not all engines are made the same, my old flying mate now has 3 x 65's all of which burn fuel at different rates and it really burn him that he can't get any more than 2.5 minutes on 12 mils of fuel where my contest 65 is getting 4.5 minutes plus on the same allocation. Methinks rinfg and bearings are in order and maybe if we can get the bath to work possible a re chrome of the bore.
Interesting times
Interesting times
My Feedback: (102)
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 20,370
Likes: 0
Received 25 Likes
on
25 Posts
RE: Welcome to Club SAITO !
F, here is a site that has three Saito .65 listed with three different compression ratios. They are
12.7
10.5
8.6 for the latest, (updated version) I think I may have the wimpy one.
http://sceptreflight.net/Model%20Eng...e%20model.html
http://sceptreflight.net/Model%20Eng...to%20FA-80.pdf This is the .80 I have which is listed as 15.5 to 1.
12.7
10.5
8.6 for the latest, (updated version) I think I may have the wimpy one.
http://sceptreflight.net/Model%20Eng...e%20model.html
http://sceptreflight.net/Model%20Eng...to%20FA-80.pdf This is the .80 I have which is listed as 15.5 to 1.
RE: Welcome to Club SAITO !
ORIGINAL: spaceworm
Like a lot of things, an adulterant often makes the smell better, especially in the morning, or evening, or anytime.
ORIGINAL: hsukaria
I have all the powerplant variety except 4-stroke gas. That seems to be out of my financial reach thus far. But I enjoy them all.
An interesting thing about glow fuel smell: I ran an engine with zero nitro last year and the smell was very different, without the nitro, it smelled like alcohol. It seems that the nitro smell overcomes the alcohol smell if it is present in the fuel. With zero nitro, the place smelled like a distillery.
I have all the powerplant variety except 4-stroke gas. That seems to be out of my financial reach thus far. But I enjoy them all.
An interesting thing about glow fuel smell: I ran an engine with zero nitro last year and the smell was very different, without the nitro, it smelled like alcohol. It seems that the nitro smell overcomes the alcohol smell if it is present in the fuel. With zero nitro, the place smelled like a distillery.
Like a lot of things, an adulterant often makes the smell better, especially in the morning, or evening, or anytime.
Senior Member
My Feedback: (3)
RE: Welcome to Club SAITO !
I grew up on IC and was a motorhead before I hit my teens, (rebuilt my first engine at 12!). To me there is just nothing like the sound of a well tuned IC engine. Used to have a Merlin powered Spitfire buzz my place, but even with that sweet scream nothing gets my heart beating like a fire snorting radial.
I have to tell the truth and state I also dabble in the Dark Arts. All my helis are electric and I have a few planes, (pair of amphib Polaris) and now getting into EDF this season. Electrics are fun and another option, but that's it. The day I drop my last Saito will likely mean it's going in the ground with me.
spaceworm, I may be getting this wrong, but I suspect the minute I think "adulterant" the wife's getting out the chainsaw.
I have to tell the truth and state I also dabble in the Dark Arts. All my helis are electric and I have a few planes, (pair of amphib Polaris) and now getting into EDF this season. Electrics are fun and another option, but that's it. The day I drop my last Saito will likely mean it's going in the ground with me.
spaceworm, I may be getting this wrong, but I suspect the minute I think "adulterant" the wife's getting out the chainsaw.
RE: Welcome to Club SAITO !
ORIGINAL: Hobbsy
Pete, you mean that there are actual electric powered planes. Never saw one at my house.
Pete, you mean that there are actual electric powered planes. Never saw one at my house.
My Feedback: (102)
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 20,370
Likes: 0
Received 25 Likes
on
25 Posts
RE: Welcome to Club SAITO !
Actually a neighbor in Alexandria, Va gave me a flying wing with an electric motor about 10 years ago. It had no actual throttle, just full blatt and off. It flew very fast, I removed its radio gear and the rest went into the big gray. rubber barrel. So, I was fibbin a little.
RE: Welcome to Club SAITO !
ORIGINAL: Hobbsy
Actually a neighbor in Alexandria, Va gave me a flying wing with an electric motor about 10 years ago. It had no actual throttle, just full blatt and off. It flew very fast, I removed its radio gear and the rest went into the big gray. rubber barrel. So, I was fibbin a little.
Actually a neighbor in Alexandria, Va gave me a flying wing with an electric motor about 10 years ago. It had no actual throttle, just full blatt and off. It flew very fast, I removed its radio gear and the rest went into the big gray. rubber barrel. So, I was fibbin a little.
I have to concede that I give-in to electric in the ducted fan jet arena. I don't see an easy was around small park-flyer jet models but to use EDF's. Otherwise, I love glow and gas.
My Feedback: (12)
RE: Welcome to Club SAITO !
My first electric plane was a Zagi flying wing. The stock setup was very anemic and was very difficult to launch. It flew this way once or twice and would stall very easy due to lack of power. I then upgraded it to a brushless motor and LiPo battery and it was like a missile. CG has to be nuts on with a flying wing. Hard to keep orientation with it too.
Senior Member
RE: Welcome to Club SAITO !
ORIGINAL: Hobbsy
You'll not find me lowering the compression, my 1.50 has 15.5 to 1 compression and my old .80 has 14.56 to 1. Compression ==torque. I say, why reduce the torque and efficiency just so you can run higher nitro further reducing efficiency and increasing fuel consumption. That's just me though.
You'll not find me lowering the compression, my 1.50 has 15.5 to 1 compression and my old .80 has 14.56 to 1. Compression ==torque. I say, why reduce the torque and efficiency just so you can run higher nitro further reducing efficiency and increasing fuel consumption. That's just me though.
Higher CR developes more TQ all other things being equal & is more effecient in extracting every bit of power from the A/F mixture.
If you play your cards right, increased CR = more power W/better fuel economy.
RE: Welcome to Club SAITO !
ORIGINAL: SrTelemaster150
Increased compression is better than a free lunch as long as one doesn't go to far & create detonation problems. It can be problematic W/glow ignition though.
Higher CR developes more TQ all other things being equal & is more effecient in extracting every bit of power from the A/F mixture.
If you play your cards right, increased CR = more power W/better fuel economy.
ORIGINAL: Hobbsy
You'll not find me lowering the compression, my 1.50 has 15.5 to 1 compression and my old .80 has 14.56 to 1. Compression ==torque. I say, why reduce the torque and efficiency just so you can run higher nitro further reducing efficiency and increasing fuel consumption. That's just me though.
You'll not find me lowering the compression, my 1.50 has 15.5 to 1 compression and my old .80 has 14.56 to 1. Compression ==torque. I say, why reduce the torque and efficiency just so you can run higher nitro further reducing efficiency and increasing fuel consumption. That's just me though.
Higher CR developes more TQ all other things being equal & is more effecient in extracting every bit of power from the A/F mixture.
If you play your cards right, increased CR = more power W/better fuel economy.
My Feedback: (3)
RE: Welcome to Club SAITO !
My wife lets me do just about anything I want to, but flying glow engines indoors isn't one of them. I have a small electric Vapor and a small coax helicopter for living room flying. I teach a small course one day a week to fly indoor electrics. I get paid to fly them indoors in a gigantic basketball coliseum at the university. Otherwise, give me noise and glow.
My Feedback: (102)
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 20,370
Likes: 0
Received 25 Likes
on
25 Posts
RE: Welcome to Club SAITO !
I made some noise with a glow engine a few minutes ago. I had a Saito .56 a few years ago and it was mounted on a Cherokee 40 that was heavy. I ran a MA three blade 12x6 on it which it turned at 8,800 rpm. It flew just fine but I wondered how a .62 would compare with the three blade 12x6. The TurboHeader was already on it so I just left as is.
Saito plain .62
Prop MA 12x6 3 blade
Fuel WildCat 15% with 18% 80/20 syn/castor blend.
Plug===Fox Miracle
Valve lash, nice, easy slide .003"
Max rpm====10.100' Idle ========1,950
I did not expect the .62 to out turn the .56 by that much.
Saito plain .62
Prop MA 12x6 3 blade
Fuel WildCat 15% with 18% 80/20 syn/castor blend.
Plug===Fox Miracle
Valve lash, nice, easy slide .003"
Max rpm====10.100' Idle ========1,950
I did not expect the .62 to out turn the .56 by that much.
Senior Member
Join Date: Apr 2010
Location: Cairns, AUSTRALIA
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
RE: Welcome to Club SAITO !
At the Ballarat Nationals (many years ago) one of our QLD number had just finished rebuilding a racing OS 61 (4 stroke). Of course it had to be tested and the rooms were relatively soundproof (aren't they) so what was a boy to do. Very noisy but running engines rich produces lots of smoke and eventually causes greatr panic in the Hotel / motel combinations of the day. His fame (DP we don't forget) lives on in the annals of Old Timer flying.
I find a lot of motels also don't understand the mystique of diesel fuel, that ether odour equates to some people as a possible crack lab or something equally as evil. Ah the problems of modern life.
I find a lot of motels also don't understand the mystique of diesel fuel, that ether odour equates to some people as a possible crack lab or something equally as evil. Ah the problems of modern life.
RE: Welcome to Club SAITO !
Diesel takes me straight back to free flight models as a kid,smells so nice.I'm about to fit a cline regulator to an inverted 82 in my decathlon which has a high tank position.Anybody here have any tips as to priming and tuning with the cline,any differences compared to the standard fuel setup?
My Feedback: (102)
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 20,370
Likes: 0
Received 25 Likes
on
25 Posts
RE: Welcome to Club SAITO !
Pete, carefully set the needles without the Cline regulator, then when you install it there will be very little if any change in the needle settings. You'll need a way to open the tank pressure line while you fill the tank. I like to pre=pressurize the tank using a Sullivan fuel bulb by injecting air through the check valve. In a cowled situation this may not be possible.
My Feedback: (102)
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 20,370
Likes: 0
Received 25 Likes
on
25 Posts
RE: Welcome to Club SAITO !
Pete, here is PB Blaster at Amazon.com if you want the genuine article.
http://www.amazon.com/s/ref=nb_sb_ss...er%2Caps%2C227
http://www.amazon.com/s/ref=nb_sb_ss...er%2Caps%2C227
My Feedback: (102)
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 20,370
Likes: 0
Received 25 Likes
on
25 Posts
RE: Welcome to Club SAITO !
Anybody looking for Saito velocity stacks, Horizon currently has them in stock. I ordered two and a new throttle arm for my .62. I split the hole out on mine.
RE: Welcome to Club SAITO !
Thanks for that wd40 should be fine then.Re the cline regulator set up and initial priming,i'm using a pressure line off the exhaust with an os oneway check valve.Can't i just open the throttle fully and block the muffler outlet with my thumb while flicking it over and get a prime that way??