new smaller (composite) Sebart Avanti XS
#1
Thread Starter
My Feedback: (3)
new smaller (composite) Sebart Avanti XS
With the announcement that JRAmericas is now the official importer for Sebart (shifting from Jason at SebartRC in Las Vegas), they also are showing a smaller version of the 2m Avanti S
http://www.jramericas.com/sebart/
[h=4]Avanti XS 1.8m/71" (1.9m/75" long) 120mm EDF or 60-100N Turbine Jet ARF (Composite Fuse)[/h]$1999 with landing gear
$1499 without landing gear
That means they now offer the balsa/built up Mini (P20 size), the new composite fuse XS (60-100), the composite fuse 2m S and the XL version (from Skymaster)
http://www.jramericas.com/sebart/
[h=4]Avanti XS 1.8m/71" (1.9m/75" long) 120mm EDF or 60-100N Turbine Jet ARF (Composite Fuse)[/h]$1999 with landing gear
$1499 without landing gear
That means they now offer the balsa/built up Mini (P20 size), the new composite fuse XS (60-100), the composite fuse 2m S and the XL version (from Skymaster)
#4
Thread Starter
My Feedback: (3)
https://www.facebook.com/permalink.p...1274194848&id=352565388262771
http://www.modelarstvoimi.sk/avanti-...odukt/9267/410
http://remotejets.com/turbine-modell...avanti-xs.html
https://www.lindinger.at/en/detail/i...rticle/9728482
available end or May?
http://www.modelarstvoimi.sk/avanti-...odukt/9267/410
http://remotejets.com/turbine-modell...avanti-xs.html
https://www.lindinger.at/en/detail/i...rticle/9728482
available end or May?
Last edited by ltc; 04-09-2016 at 11:20 AM. Reason: Added link
#5
#11
Join Date: Apr 2013
Location: holland, NETHERLANDS
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
looking forward to see one!
Hope the gears are of better quality then on the mini avanti, or is seba gonna use his customers again as "in field paying gunny pigs" ??
Hope the gears are of better quality then on the mini avanti, or is seba gonna use his customers again as "in field paying gunny pigs" ??
#18
Join Date: Apr 2013
Location: holland, NETHERLANDS
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
#19
Join Date: Jun 2004
Location: Alice Springs, AUSTRALIA
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Midas D,
The Avanti XS is coming out of a different factory than what the original and mini come from so quality of the gear mounts is yet to be seen. The different factory is the reason why the Australian importer isn't getting any apparently.
The Avanti XS is coming out of a different factory than what the original and mini come from so quality of the gear mounts is yet to be seen. The different factory is the reason why the Australian importer isn't getting any apparently.
#20
The firts models come in July, Aprox.
In every case at Jetpower it will be in stock at stand of SebArt !!!
Regards from Spain
Carlos
www.cmjets.com
In every case at Jetpower it will be in stock at stand of SebArt !!!
Regards from Spain
Carlos
www.cmjets.com
#23
I fly mine with a P100 it is a very lite air frame .. I fly from some thick grass and the 100 helps on take off . \Not a fsat jet but great vertical and slows down to a crawl to land
#24
My Feedback: (3)
I have a Merlin 100 XBL in an Avanti XS BWG back in Canada, and I am outfitting one here in Hawaii (Frecce Tricolori scheme) with a JetCat P-100 too. My sense of the thing is if you fly from asphalt or other hard surface then a 70 will be fine, though somewhat vertically limited as this is a 17 Lb aircraft without fuel, but if you fly from grass then I’d use either an 85 or a 100.
Len
Len