Official Tamiya TT-01 Thread
04-23-2006, 02:15 AM
#3
Senior Member
Join Date: Jan 2005
Location: perth, AUSTRALIA
Posts: 2,667
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
Here is my TT-01.
So far I have an Aluminium Drive Shaft, Ball Bearings and the Heat Sink.
Soon it will have the carbon upper brace, aluminium oil filled shocks, decent 27t stock motor. I need some new tires too, prolly get some takeoff 27's.
QUALITY HOP-UPS:
[link=http://www.rcmart.com/catalog/product_info.php?cPath=595_424_744_708&products_id =12072]Aluminium Motor Mount[/link]
[link=http://www.rcmart.com/catalog/product_info.php?cPath=595_424_744_708&products_id =14163]Aluminium Wheel Hex's[/link]
[link=http://www.rcmart.com/catalog/product_info.php?cPath=595_424_744_708&products_id =5274]Motor Heat Sink[/link]
[link=http://www.rcmart.com/catalog/product_info.php?cPath=595_424_744_708&products_id =8553]55t / 58t Spur Gear Set[/link]
[link=http://www.rcmart.com/catalog/product_info.php?cPath=595_424_744_708&products_id =14523]Aluminium Drive Shaft (This is a MUST!)[/link]
[link=http://www.rcmart.com/catalog/product_info.php?cPath=421_108_762_764&products_id =4284]Ball Bearings (THIS IS A MUST!)[/link]
22t / 23t Tamiya Pinion Gear Set (Haha to lazy to find a link to this one somewhere)
[link=http://www.rcmart.com/catalog/product_info.php?cPath=595_424_744_708&products_id =7196]Carbon Upper Brace[/link]
[link=http://www.rcmart.com/catalog/product_info.php?cPath=421_389_390&products_id=718 1]CVA Mini Shocks (ANY OIL FILLEDS ARE BETTER THAN STOCK!)[/link]
And yeah, you will need some new tires, stockers on a TT-01 are trash. If you are just a basher. pick up some foamies, they are cheap and last longer than rubbers, but are not legal to race with at all tracks. If you are a racer, pick up some rubbers, I like Take-offs the most, but whatever the others guys are running is normally the best
.
04-23-2006, 02:20 AM
#7
Senior Member
Thread Starter
Join Date: Apr 2006
Location: W,
HI
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
ORIGINAL: RC_Diablo
Hmmm ive been thinking about street cars is the TT-01 good???
Hmmm ive been thinking about street cars is the TT-01 good???
04-23-2006, 02:28 AM
#8
Senior Member
Join Date: Jan 2005
Location: perth, AUSTRALIA
Posts: 2,667
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
It is a good beginner car yes, but it is by no means a top end racer. It really lacks adjustability, so it's hard to dial in to a track, but that can be good for a new person because they can't mess it up to bad.
It is a really strong chassis, hard to break, and parts are available at nearly all LHS's. It is also a common chassis for people to drift with.
Running the Tamiya Sports Tuned motor (geared 22/58) I get around 30-40 minute run times with a 3000mAh pack. As for speeds, it tops out at about 45kph with the 22t pinion, pushing over 50kph with the 23t. I am picking up a racing stock motor (the tamiya sports tuned is a really crap motor, but its cheap, and is faster than stock) so I should be seeing closer to 55kph out of it I hope with the 22t pinion, and acceleration will be a heap better, bu runtime will drop to around 25mins I think.
It is a really strong chassis, hard to break, and parts are available at nearly all LHS's. It is also a common chassis for people to drift with.
Running the Tamiya Sports Tuned motor (geared 22/58) I get around 30-40 minute run times with a 3000mAh pack. As for speeds, it tops out at about 45kph with the 22t pinion, pushing over 50kph with the 23t. I am picking up a racing stock motor (the tamiya sports tuned is a really crap motor, but its cheap, and is faster than stock) so I should be seeing closer to 55kph out of it I hope with the 22t pinion, and acceleration will be a heap better, bu runtime will drop to around 25mins I think.
04-23-2006, 02:32 AM
#9
Senior Member
Join Date: Mar 2006
Location: Stockbridge,
GA
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
Well racing doesnt matter to me the only RC tracks around here are dirt tracks so wouldnt have anywhere to race anyways I might look into one
04-23-2006, 02:35 AM
#10
Senior Member
Join Date: Jan 2005
Location: perth, AUSTRALIA
Posts: 2,667
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
If you arn't going to race, this car would be great.
I mean I even take mine off my jump at like 30mph!!! Never broke doing that either.
I mean I even take mine off my jump at like 30mph!!! Never broke doing that either.
04-23-2006, 02:38 AM
#12
Senior Member
Join Date: Jan 2005
Location: perth, AUSTRALIA
Posts: 2,667
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
Haha last time I broke it was when I tagged a read wheel on a steel post at full speed, and that ONLY broke a rear a-arm brace, not even an arm itself!
04-23-2006, 11:23 AM
#17
Senior Member
Join Date: Mar 2006
Location: toronto, ON, CANADA
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
i get around 60-70 kmph on my tt-01 ddepending on the terraini have aluminum shaft, ball bearings, aluminum heatsink, 22 t pinion, 10 t motor, foams. it goes vroom vroom lol.
i have aluminum shaft, ball bearings, aluminum heatsink, 22 t pinion, 10 t motor, foams. it goes vroom vroom lol.
04-25-2006, 09:45 AM
#25
Senior Member
Join Date: Jan 2005
Location: perth, AUSTRALIA
Posts: 2,667
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Tamiya TT-01 Thread
You can only use curtain pinion, with curtain spurs in the TT-01. I can't remember all the combinations, but I find that 22/23 pinion with a 28 spur is great for anyt rack!