nmann_23

What do you have heres one of my favorites


1/18 scale Duratrax Vendetta ST (buggyized) it is a full out race car..xray servo saver, ball diffs with carbide diff balls front & rear, steel cvds front & rear, carbon fiber shock towers (front is doubled) carbon fiber servo hold down, carbon fiber top brace, carbon fiber driveshaft, graphite diff cases, graphite chassis, graphite rear hubs, aluminum front & rear hinge pin holders,titanium pivot balls, lunsford titanium turnbuckles, aluminum wheel hexes, aluminum shocks front & rear with standoffs, ATM milled motor mount.. mini mamba pro esc, GH 5700kv motor(heli motor)[>:]... hitec servo (HS225MG), foam tires, and custom painted body!!!!

Sigma.40

My Feedback: (1)

HPI Baja 5B 2.0- Tuned Exhaust, 26cc engine, RPM A-arms, sway bars, stock everything else.

Losi 8ight 2.0- Losi 350 .21 engine, Stock everything

Traxxas Slash 4x4- Velineon VXL Brushless, Lipos, RPM parts throughout

nmann_23

ya i have 1/16 revo vxl parrell 11.1 1500mah, 1/10 slash vxl greg adler stock, savage xl, tmaxx 2.5r nova head integy upper arms iteg bumper mounts proline big joe 40series alluminum skidplates racing clutch forget what brand and another almost stock vendetta st with green buggy body losi frenzy brushed motor. but my custom vendetta he race car REVO KILLER!!!

SyCo_VeNoM

Jammin X1x CRT
Bought it as a extremely beat up roller
Slapped a Mamba Monster 2200kv combo(had it laying around from my savage I took it out of, had to find something to put it in ) in it with a rc-monster motor mount set. Running on 4S I can pop wheelies on demand at any point during its acceleration(even 80% throttle).
Battery trays were made from 2 Stampede chassis's
This is probably the fastest RC I own currently, and can easily be geared up to be faster (like it originally was) seeing I geared it as low as I could.
I've replaced the wing since the pics with a black one (that one in the pic was dyed black and you can see the white scratches)

Edit uploaded the pic of before I put its wheels on prior to its 1st run(just found it)

nmann_23

Real nice bro. Thats sick!!!!!!!!!!!!

schuttman

Associated SC8 pro.28 with a Dynamite 086hs pipe,RC10GT2 os12tg fullmod. Mugen MST1 converted to dirt oval, Werks .12 full mod anda THS pipe

Sigma.40

My Feedback: (1)

Does that handle any differently with the motor up front?

The_Shark

ah! you run outrunners too! my rc18t is running a 5500KV outrunner for 500 sized heli's its also geared 28/52 its running a 3s 40amp lipo and hobbywing 25A esc.

other than that i have my 1/8 OFNA 9.5 with a Jammin JPX .21 with a JP-2 high speed pipe.

my other two are dogs compaired to this duo.

nmann_23

Only way to go!!!! that rc18 sounds ILL u got any piccs!!!!!! ALSO YOU REMEMBER WHAT BRAND outrunner!!!! you got in there

22johnq

hes mine it not my fastest but its the best handeling







sorry about the pic quality<br type="_moz" />

Fuel Crazy

My Feedback: (1)

my fastest land rc sofar until my RS4 is finished...

HPIFirestorm 10T... Hyper .21-8port Dragmod, Cut &amp;Modded MAC's marine pipe, Traxxas 2speed trans: 16/41-20/37 gearing.. has run 62.5mph sofar.

not that fast for bigblock trucks by todays standards...but Firestorms only ran 40mph stock.

nmann_23

NICE LOTS OF ALLUMINUM WHAT TYPE OF CAR IS THAT LOOKS GOOD!!

nmann_23

love the firestorm were you get the wheely bar did u make it, it looks sick

Fuel Crazy

My Feedback: (1)

yes i made it. Using 5/32" carbon fiber tube, 4-40 rods &amp; tie-rod ends, nylon bellcranks, and a modified 1/24 scale model car tire. The upper bar was adjustable, which allowed me to lower or raise the bar about 3/4" or so.

It unfortunately got destroyed the first time the truck took a tumble. Have a new, stronger one in the works.

nmann_23

When new ones done youll have to send pics

SyCo_VeNoM

Couldn't say from stock nitro, but I find the handling is pretty good with the motor upfront. Its actually seems to be pretty balanced left to right, and front to back with the 2 lipos on in the back on both sides.

Fuel Crazy

My Feedback: (1)

will do..but its gonna look pretty much the same. Just bigger diameter solid carbon rods this time, and aluminum bellbranks instead of the nylon.

Sigma.40

My Feedback: (1)

Just curious, I saw a picture of the Losi Strike awhile back and it made me wonder how much motor position affected handling on an electric.

bronx boy

fast is a relative thing .when your friend who runs low 10s in his blown chevy hands you back your controller and says take this thing my hands are shaking then you know your job is done .if its to fast for him to handle

rubber_junkie

fast cars in my collection

ftx blaze aka Duratrax vendetta
quark 33a esc but been mucking about so using sidewinder
cm26 6.8kv
2s an 3s lipo use
essential alloy hopp ups ( camber arm,shock stand off's,diff out cups,shafts, wing post)







Mugen mtx2 novarossi 5 port turbo

venom gpv1 modifed 9.2kv 2s 30a esc front brake,oil forks plus other bits [8D]

Thunder tiger ts4E mamba max with 7700kv 2s







serpent 960



modifed fusions



ntc3 JP tuned novarossi

rubber_junkie

sportwerks recoil
9.2kv 3s





thunder tiger ts4n pro & yokomo gt4


mini truggys
ctr.5 rbx12, currently doing BB conversion with rbws7 2 for fun





Hyper mini st novarossi 12



serpent m2, mega evo 4


ts4n pro with mugen mtx2(old pic)



ts4n pro with lola

nmann_23

fast is my tuned 86 fazer and ive ridden gsx 1100 punched to 1250 with nos so yes i know that FUN BEAST but rc is a hobbie and its also fun !!!!!!!!!!!!!!!!

nmann_23

sick ass blaze i want it !!!!!!!!!!

nmann_23

sick hy 12 bro

The_Shark

its a turnigy that sucks up 600watts. it has so much power you have to baby it to speed or else it just flips about and spins out (it will spin untill it flips on its back) one time i punched it off the line and it ripped the rim off the hub.

for size compairison, the purple motor is a 270