Smoke with vectored thrust
#1
Thread Starter
Join Date: Mar 2002
Location: OR
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Smoke with vectored thrust
Is anyone using smoke with 2 axes vectored thrust?. I have a CARF Rookie Last Edition with dual axes vectored thrust and there is not enough room to inject oil at the tailpipe when nozzle is at full travel. I think it may be possible to put a nozzle in the cone and connect with flexible tubing.
Would appreciate any pictures or suggestions.
Thanks
Ray
Would appreciate any pictures or suggestions.
Thanks
Ray
#2
Senior Member
Join Date: Aug 2006
Location: Petah-Tikva, ISRAEL
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
RE: Smoke with vectored thrust
why not inject the smoke fluid at the output of the turbine?
on my rookie, i can attach the smoke fluid injector directly at the exhaust cone of the turbine and the vectored pipe doesn't need to be changed.
on my rookie, i can attach the smoke fluid injector directly at the exhaust cone of the turbine and the vectored pipe doesn't need to be changed.
#3
RE: Smoke with vectored thrust
Just be careful with the full vector that the movable part does not contact the injector and rub a hole in it, the oil will get everywhere if it does.
Mike
Mike