ESC signal connections
06-15-2022, 03:52 AM
#1
Junior Member
Thread Starter
Join Date: Jun 2022
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
ESC signal connections
I have a 3ph BLDC speed controller with only a thin red and a thin black wire for the speed control signal.
It has the usual thick red and black battery wires.
I am used to three control wires, (red +5V, white signal, black ground), that plug directly into the receiver.
Before I start fiddling and it ends in tears.. can anyone shed some light on this two wire control signal arrangement?
It has the usual thick red and black battery wires.
I am used to three control wires, (red +5V, white signal, black ground), that plug directly into the receiver.
Before I start fiddling and it ends in tears.. can anyone shed some light on this two wire control signal arrangement?
