Go Back  RCU Forums > RC Airplanes > RC Jets
Reload this Page >

PC-21 from WIND RC questions

Notices
RC Jets Discuss RC jets in this forum plus rc turbines and ducted fan power systems

PC-21 from WIND RC questions

Old 05-19-2024, 06:19 PM
  #101  
Fred-WindRC
Member
 
Join Date: Nov 2022
Posts: 48
Received 4 Likes on 4 Posts
Default


Griffin Scheme available.

Suncover for PC21, limited Quantity available in stock.
Old 05-20-2024, 07:42 AM
  #102  
roydefiant
Thread Starter
 
Join Date: Jan 2003
Location: Eden Prairie, MN,
Posts: 1,085
Likes: 0
Received 50 Likes on 46 Posts
Default

One of my front cowl pins also broke. I bought identical replacements on Amazon. I then was able to dremel out the broken one and glue in a replacement.
Old 05-21-2024, 12:29 AM
  #103  
GULDUKAT
 
Join Date: Sep 2016
Location: USA
Posts: 282
Received 67 Likes on 43 Posts
Default

Originally Posted by Westwindpilot86
Hey everyone, got mine maidened. I have a total of 2 flights on it. Hopefully I can help everyone out with what I found on my pc-21 to help others with theres.

First impressions.....

1: This thing is huge and is very good quality.
2: The packaging in the crates is the best I have ever seen. Other companies like to wrap in bubble wrap, and stuff everything into as few boxes as they possibly can. Wind RC used 3 crates to package this plane. Everything had plenty of room inside so nothing was rubbing on eachother. Roy had an issue with the cockpit seat coming unglued from the cockpit floor and rubbing on the canopy. I didnt have this issue but it could very well happen to you. Also, please take Roys advice on making a system so your canopy doesnt go all the way over. I used a string method that can be taken on and off with ease. But over-all I was extremely impressed with everything else.
3: Loc-tite!!!! I got the plug and play version with servos and hardware installed. I went over all the hardware and servos and to my surprise everything was loc-tighted. (you dont find that much anymore).
4: Front pins to take off cowl. These pins are fragile. Dont know what kind of metal they are made of but my two front pins broke off trying to get the cowl off the first time. Now its a hassle to get cowl off. I have to take prop and spinner off in order to get cowl off now.

The assembly itself was pretty straight-forward as there is so much done for you. I would say the part that took the longest was turbine placement. I am using the kingtech k-100TP. I saw pictures of other builds and it looked like no modifications or very light modifications where done to get the turbine installed. Mine required quite a bit of dremeling and shimming to get it to line-up. But once enough customizing was done it fit great and looks very clean. I am huge on spinner/cowl spacing and centering and mine is spot-on.

The fuel tank was not an issue but I elected to take it out which is a nightmare. I took out the Wind Rc plug, line, and clunk and replaced with my own style. I used leftover pieces I had from other birds. I do plan on putting a second tank in but will wait a little while longer to do that.

Issues!!!

The two big issues I have had on this plane are the retracts and brakes. The retracts themselves work fine, but the struts on mine dont extend back to the full down position when there is no weight on the aircraft. This prevents the gear going into there wheel wells correctly when being retracted. I know there is a trick where you can install wood dowels to compress the springs a bit more. I have done this but on my second flight the right main still didnt fully retract. So I will need to go in and make the dowel a bit longer.
The brakes are another issue that although my plane stopped before going off the edge of the runway it got close.
Here is an example:
My runway is 700 feet long. I landed 50-100 feet after the beginning of the runway and went to full pulsating brakes. It came to a stop about 75 feet before the opposite side of the runway. That is way to long. I landed at a nice slow speed as well. Fred from Wind RC says he has new brake hubs and I will end up ordering them in the coming weeks and hopefully those help.

Flight characteristics are awesome. I have 32 degrees of flaps and she comes in nice and slow and predictable.

But overall I am very impressed with this plane. I would recommend it to anyone wanting a very peaceful, predictable aircraft to add to there hangar.

Any questions, please ask.
Congrats. for the struts - the grease inside loosens/softens up over time and gets better and helps with completely extending....If you take them out and remove some of the grease - you can expedite the process....
I do this with all systems that use that sticky grease...
Old 05-30-2024, 11:57 AM
  #104  
roydefiant
Thread Starter
 
Join Date: Jan 2003
Location: Eden Prairie, MN,
Posts: 1,085
Likes: 0
Received 50 Likes on 46 Posts
Default


Jetcat SPT10 installation. Duck decoy weights in bottom of nose to adjust CG. As per Danny Diaz helpful recommendations ran all lines underneath and shielded with fiberglass heat shields from McMaster and also wrapped those aluminum tape.

Top photo with stopcock, fuel filter, dry lock fuel fill. Hopefully I have ECU and jetcat telemetry module properly programmed to my JETI transmitter. Next step , get my buddies to assist with run up
The following users liked this post:
Havilland (08-26-2024)
Old 05-30-2024, 12:30 PM
  #105  
roydefiant
Thread Starter
 
Join Date: Jan 2003
Location: Eden Prairie, MN,
Posts: 1,085
Likes: 0
Received 50 Likes on 46 Posts
Default

Wondering if anyone has had issues with shielding of GPS sensor for ground speed in the airframe? Looks like the fuselage may have a thin layer of carbon fiber that is then covered on the inside with airex. I’m installing a GPS sensor and looking for an appropriate spot for the installation
Old 05-30-2024, 01:07 PM
  #106  
roydefiant
Thread Starter
 
Join Date: Jan 2003
Location: Eden Prairie, MN,
Posts: 1,085
Likes: 0
Received 50 Likes on 46 Posts
Default

By the way I weighed the cockpit tub without pilots. Mine was 3 lb 4.7 oz
Old 06-13-2024, 04:51 PM
  #107  
roydefiant
Thread Starter
 
Join Date: Jan 2003
Location: Eden Prairie, MN,
Posts: 1,085
Likes: 0
Received 50 Likes on 46 Posts
Default


Thanks to Ali M. Maidened my PC-21 today uneventfully. Awesome in the air
The following users liked this post:
BadBill (06-14-2024)
Old 06-16-2024, 12:28 PM
  #108  
David Jackson
My Feedback: (15)
 
Join Date: Apr 2002
Location: Nashville, TN
Posts: 1,931
Received 2 Likes on 2 Posts
Default Wind RC PC 21

Hey Roy,
How much weight was added to the nose to CG your model? Was your model flown with, or without the cockpit?
Old 06-16-2024, 12:38 PM
  #109  
sportflya2
Junior Member
 
Join Date: Jan 2024
Posts: 8
Received 0 Likes on 0 Posts
Default

Hey David I have one as well. No weight added if in fact I found that the model has a more rear cg.
Old 06-17-2024, 06:02 AM
  #110  
roydefiant
Thread Starter
 
Join Date: Jan 2003
Location: Eden Prairie, MN,
Posts: 1,085
Likes: 0
Received 50 Likes on 46 Posts
Default

David, the model was flown 3 X this weekend all without the cockpit. The nose weight is 32 ounces of lead with CG dead on at 220cm. Ali thought it was a little nose heavy and thought that 4-8 ounces could be removed. I’m planning to remove 8 ounces and see where it balances at so a reference is established when the cockpit goes in.

The first 2 flights uneventful. On 3rd flight gear amped out just as wheels were entering wheel wells. On landing the brakes faded and the model kept running down the runway. Surprisingly on taxi back that start to work again to some degree.

the most frustrating aspect of the 3rd flight was the cowl. When the model was first unpackaged I could not get the the right front cowl pin to move. I thought maybe it was accidentally glued or stuck to paint. While trying to retract it the pin broke off. I had to dremel it out and found identical latch pins on Amazon. I glued a new one in place. After all the flights I would release the cowl while the turboprop was cooling and I was not using a leaf blower to cool the turboprop. On 3rd flight as I tried to remove the cowl the left front cowl latch broke with only very little pressure being put on it. As a consequence I was only able to free up 2 of the 3 latches and was trying to release the broken latch. To my horror , as I’m trying to figure out how to release the broken latch, the paint on the top of the cowl started to blister. Clearly 3 layers of BVM heat shield was not enough.

so current plan is to replace the retract/brake controller with a LG15. I will now add a gyro now that the model is trimmed out and will post my throws later. I’m looking at other hatch latches to replace the front 2, maybe BVM latches. For the time being will live with the cowl blemishes. They are difficult to see from 5 feet away but pretty easy to see from 12 inches away. At some point I will consider repainting the cowl.

The model has great presence in the air and is a nice flyer. Frustrating dealing with issues during our flying season
Old 06-17-2024, 06:24 AM
  #111  
sportflya2
Junior Member
 
Join Date: Jan 2024
Posts: 8
Received 0 Likes on 0 Posts
Default

Roy I had the same thing happen I ordered new pin as they screw out and wasn’t aware. I also put the new gear controller and only got to test as my tank had a leak. Hopefully my next flight will be uneventful
Old 06-17-2024, 09:43 AM
  #112  
roydefiant
Thread Starter
 
Join Date: Jan 2003
Location: Eden Prairie, MN,
Posts: 1,085
Likes: 0
Received 50 Likes on 46 Posts
Default

So sportflyer, did you replace the OEM retract controller with a Xicoy? If so what amp settings did you go with?

I didn’t realize till your post the pins are screwed in. So the question is would you trust those latches after red loctite the pins in place?
The following users liked this post:
sportflya2 (06-17-2024)
Old 06-17-2024, 10:17 AM
  #113  
sportflya2
Junior Member
 
Join Date: Jan 2024
Posts: 8
Received 0 Likes on 0 Posts
Default

Yes I changed to 2.0.and yes I loctite which the originals didn’t have and it vibrated out
Old 06-17-2024, 03:28 PM
  #114  
David Jackson
My Feedback: (15)
 
Join Date: Apr 2002
Location: Nashville, TN
Posts: 1,931
Received 2 Likes on 2 Posts
Default

Thanks for the information. I tried the BVM heat stuff to protect the engine hatch cover on my Skymaster PC-21, but had to the remove the hatch immediately after engine shut down. On my last SM PC-21, I used carbon felt welding blanket (EBAY) to protect the engine cover. It seemed to work much better than the BVM heat shield. I do have the welding blanket stuff attached to the engine hatch on my WindRc PC-21.

Anyway, looking forward to getting my plane in the air.
Old 06-17-2024, 03:44 PM
  #115  
David Jackson
My Feedback: (15)
 
Join Date: Apr 2002
Location: Nashville, TN
Posts: 1,931
Received 2 Likes on 2 Posts
Default Wind RC XXL PC-21

Just curious, how well would the landing gear on the PC-21 handle landing in the grass. I am flying from a 400' paved runway, but there is a bigger grass area that I use to land a 1/4.5 scale Corsair.
Old 06-17-2024, 03:48 PM
  #116  
sportflya2
Junior Member
 
Join Date: Jan 2024
Posts: 8
Received 0 Likes on 0 Posts
Default

It handles nice and will require very little brakes as for asphalt runway not so much. The brakes need to be upgraded to suitable stopping distance
Old 06-18-2024, 08:04 AM
  #117  
roydefiant
Thread Starter
 
Join Date: Jan 2003
Location: Eden Prairie, MN,
Posts: 1,085
Likes: 0
Received 50 Likes on 46 Posts
Default

So in summation seems better heat insulation is needed for the cowl and maybe consider a leaf blower but the latter raises concerns about blowing hot air into the airframe at the expense of cooling the cowl hatch.

also sounds like mandatory to unscrew all latch pins and red loctite them in place.


In addition if one wants reliable retraction cycles and brakes move to a LG15. According to thread posted on the LG15 need to use a voltage regulator set to 7.5 volts to power the LG15
Old 06-28-2024, 02:34 AM
  #118  
eveningonly
Junior Member
 
Join Date: Jun 2024
Posts: 17
Likes: 0
Received 2 Likes on 2 Posts
Default

Great crafting ability. It looks like it has a lot of detail and is very realistic.
Old 07-21-2024, 01:18 PM
  #119  
roydefiant
Thread Starter
 
Join Date: Jan 2003
Location: Eden Prairie, MN,
Posts: 1,085
Likes: 0
Received 50 Likes on 46 Posts
Default

Have red loctite now on all latch pins. Removed 6.6 ounces of lead and rebalanced with 25.4 ounces of lead in the nose. Rebalanced dead on at 222cm from leading edge, this is 2cm back from the CG of the 3 first test flights. Now installing LG15 and cortex pro before next flight. Then will start cockpit installation
Old 08-15-2024, 06:35 PM
  #120  
Fred-WindRC
Member
 
Join Date: Nov 2022
Posts: 48
Received 4 Likes on 4 Posts
Default

Two of them are going to paint on the PC21. Which scheme do you like?


Old 08-26-2024, 10:15 PM
  #121  
Havilland
Junior Member
 
Join Date: Apr 2022
Location: Germany
Posts: 11
Received 1 Like on 1 Post
Default

Hi,

both schemes have their charm and you can create a great model with them.
The following users liked this post:
Fred-WindRC (08-30-2024)

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Manage Preferences Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.