Lipo storage with Cellpro 10XP
08-14-2024, 11:20 AM
#1
Thread Starter
My Feedback: (2)
Join Date: Dec 2010
Location: Spokane, WA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Lipo storage with Cellpro 10XP
I am having trouble getting to the storage mode on my Cellpro 10 XP , I have used this function in the past, but now I can't find it. I may have changed the preset for this , but I still should be able to find it and change it back, right? Is there any way to restore this to the factory settings? The charger has been a workhorse for years, but I really need the discharge to storage function. Can someone help me out with some info?
Thanks,
Bill
Thanks,
Bill
08-17-2024, 05:03 PM
#2
Junior Member
Join Date: May 2024
Location: USA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I am having trouble getting to the storage mode on my Cellpro 10 XP , I have used this function in the past, but now I can't find it. I may have changed the preset for this , but I still should be able to find it and change it back, right? Is there any way to restore this to the factory settings? The charger has been a workhorse for years, but I really need the discharge to storage function. Can someone help me out with some info?
Thanks,
Bill
Thanks,
Bill
1. Connect the Cellpro 10XP to a power source (12V DC input).
2. Press and hold the "ENTER" button while powering on the charger.
3. Release the "ENTER" button when the display shows "RESET".
4. Use the "UP" or "DOWN" buttons to navigate to "FACTORY RESET" and press "ENTER".
5. Confirm the reset by selecting "YES" and pressing "ENTER".
