Clarke 1/4 scale Tigermoth Throws
#1
Senior Member
Thread Starter
My Feedback: (7)
Join Date: Apr 2002
Location: Mount Dora,
FL
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
Clarke 1/4 scale Tigermoth Throws
I am just finishing renovating a Clarke 1/4 scale tigermoth and cannot find the
recommended control surface throws. If anyone has them I would
appreciate them. Otherwise it will be a trial and error on Saturday.
Thanks and good luck
Paul
recommended control surface throws. If anyone has them I would
appreciate them. Otherwise it will be a trial and error on Saturday.
Thanks and good luck
Paul
#2
My Feedback: (24)
Join Date: Aug 2002
Location: Novi, MI
Posts: 884
Likes: 0
Received 0 Likes
on
0 Posts
RE: Clarke 1/4 scale Tigermoth Throws
I believe I sent you an email, but just for the record, my notes say recommended settings are Elevator 3" up, 2" down; Rudder 3" both ways; Ailerons 3" up, 1" down.
#3
My Feedback: (25)
Join Date: Jan 2002
Location: Norristown, PA
Posts: 1,086
Likes: 0
Received 0 Likes
on
0 Posts
RE: Clarke 1/4 scale Tigermoth Throws
Why would you risk the airplane and not call Clark?
http://www.clarkindustries.on.ca/
-Mustang51
http://www.clarkindustries.on.ca/
-Mustang51
ORIGINAL: dragoonpvw
I am just finishing renovating a Clarke 1/4 scale tigermoth and cannot find the
recommended control surface throws. If anyone has them I would
appreciate them. Otherwise it will be a trial and error on Saturday.
Thanks and good luck
Paul
I am just finishing renovating a Clarke 1/4 scale tigermoth and cannot find the
recommended control surface throws. If anyone has them I would
appreciate them. Otherwise it will be a trial and error on Saturday.
Thanks and good luck
Paul
#4
My Feedback: (24)
Join Date: Aug 2002
Location: Novi, MI
Posts: 884
Likes: 0
Received 0 Likes
on
0 Posts
RE: Clarke 1/4 scale Tigermoth Throws
OK, so you don't believe me. A direct copy and paste of an email I got last August:
Dear Sir:
Rudder 3 inches each way. Elevator 3 inches up 2 inches down. Ailerons 3 inces up 1 inch down. Hope this helps.
John Clark
From the horse's mouth...
Dear Sir:
Rudder 3 inches each way. Elevator 3 inches up 2 inches down. Ailerons 3 inces up 1 inch down. Hope this helps.
John Clark
From the horse's mouth...