Float construction idea.
#1
Senior Member
Thread Starter
Join Date: Sep 2002
Location: e, ZIMBABWE
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Float construction idea.
I would like to hear your oppinion before proceeding !
My idea is using fiber-glass/epoxy over 3mm Depron for formers and skin on a pair of medium-sized floats.
Maybe glassing both sides of the Depron to form a Sandwich construction.
Could this be a good idea or should I just stick to traditional methods ?
Cheers,
Ikaros
My idea is using fiber-glass/epoxy over 3mm Depron for formers and skin on a pair of medium-sized floats.
Maybe glassing both sides of the Depron to form a Sandwich construction.
Could this be a good idea or should I just stick to traditional methods ?
Cheers,
Ikaros
#2
Senior Member
My Feedback: (1)
Float construction idea.
It's worth exploring. Apparently depron is light and reasonably strong. Here is a web page with designs and techniques for some previous uses in model planes, maybe this will be useful to you.
http://www.nyblimp.com/zepron.htm
http://www.nyblimp.com/zepron.htm