Linsner7

Hi All!!
Im trying to replace my flywheel/Slipper Clutch on my 2003 2.5 T-Maxx. But when I tighten it up the whole axel spins ,and I cant loosen it either. Now here is whats weird. I already took off the old gear with no issue. Now I have the new one on about 3 threads inpast the top of the nut. Am I doing something wrong? The manual does not tell me squat.
Please help me Obiwan, your my only hope :P

2.5 flex

is the sliper clutch slippen or is the axel spinning?

Linsner7

Axel is spinning.
Here's an image.

rawkfist2

WOW take a wrench and hold the flywheel in place.

Linsner7

Wont work, the axel is spinning when I turn the nut. The gear holding is not an option here. When I hold the gear it just stays still while the axel turns .

GreenRacer

My Feedback: (3)

You're talking about the spur gear. And it sounds like you forgot to replace the friction pegs. These things: http://www2.towerhobbies.com/cgi-bin...?&I=LXJK92&P=M


Here's an article on how to change the spur gear on your t-maxx: http://www.traxxas.com/support/index...&cat=35&id=289

Linsner7

You were right. I did forget the peggs But I was able to get the nut off finaly and I ordered my replacment pegs.[8D]
Remember kids, always pay attention in class!
Thanks for all the info people!!