75% Assembled?
#1
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Aurora,
CO
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
75% Assembled?
After tons of reading and talking, I decided to get the Kyosho MP7.5 Inferno sport, now this comes 75% assembled, what does that mean, what do you have to assemble? Ive never seen a 75% one, any help would be great.
#2
Senior Member
My Feedback: (2)
Join Date: Nov 2002
Location: Seattle, WA.
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
75% Assembled?
In the case of the car you are looking at, here is the info:
INCLUDES: Inferno MP-7.5 Sports rolling chassis with Aluminum shocks,
GS21R Engine, Clear lexan body, tires, 48 Tooth Spur Gear,
10-Spoke Green Wheels, Green Wing, 13 Tooth Clutch Bell,
instructions, decal set
REQUIRES:Radio: 2-Channel with 1 Standard and 1 High Torque Servo
Radio Batterie8) AA size
Glow Starter: 1.2 volt
Paint: Polycarbonate for body
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 18% lubricant
You will need to paint the body and install the radio gear.
INCLUDES: Inferno MP-7.5 Sports rolling chassis with Aluminum shocks,
GS21R Engine, Clear lexan body, tires, 48 Tooth Spur Gear,
10-Spoke Green Wheels, Green Wing, 13 Tooth Clutch Bell,
instructions, decal set
REQUIRES:Radio: 2-Channel with 1 Standard and 1 High Torque Servo
Radio Batterie8) AA size
Glow Starter: 1.2 volt
Paint: Polycarbonate for body
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 18% lubricant
You will need to paint the body and install the radio gear.
#3
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Aurora,
CO
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
75% Assembled?
What constitutes a high torque servo? O have a JR XR2 Am radio and 2 jr servos, I dont think they are high torque. I will probably run this radio until I get an FM, airtronics
#5
Senior Member
My Feedback: (2)
Join Date: Nov 2002
Location: Seattle, WA.
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
75% Assembled?
The stock servos with the JR xr-2 are the z250 and I would not suggest that you use it for steering.
Z250 Racing Servo Specifications
Torque: 49
Speed: .19
Weight: 1.47
Size: .73x1.52x1.32
AABearing: bushings
Motor: 3-pole Ferrite
Z250 Racing Servo Specifications
Torque: 49
Speed: .19
Weight: 1.47
Size: .73x1.52x1.32
AABearing: bushings
Motor: 3-pole Ferrite
#6
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Aurora,
CO
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
75% Assembled?
for throttle it should work right? My XR2i came with only one servo, since it was for the xxx-t, electric. But it came with the Z590M servo, is this one better than the other?
#7
Senior Member
My Feedback: (2)
Join Date: Nov 2002
Location: Seattle, WA.
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
75% Assembled?
Yes it will work, make sure you use a 6 volt receiver pack.
Here are the specs:
Z590M TORQUE RACE SERVO:METAL GEAR
Torque: 85 ounce inch (@6.0V)
Speed: .15 sec/60deg (@6.0V)
Weight: 1.6 oz
Size: 0.73 x 1.55 x 1.46"
Motor: 3-pole ferrite
Gears: metal
Here are the specs:
Z590M TORQUE RACE SERVO:METAL GEAR
Torque: 85 ounce inch (@6.0V)
Speed: .15 sec/60deg (@6.0V)
Weight: 1.6 oz
Size: 0.73 x 1.55 x 1.46"
Motor: 3-pole ferrite
Gears: metal