Prop to motor mount ?
08-13-2007, 02:42 PM
#1
Senior Member
Thread Starter
Join Date: Jun 2004
Location: Monticello,
FL
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Prop to motor mount ?
OK I want to mount a prop to a 540 motor I have but cant understand how the two fit and what I would need to do it. I know nothing about planes...
The motor has a 1/8" shaft with a flat on it...
The motor has a 1/8" shaft with a flat on it...
08-13-2007, 04:35 PM
#2
Junior Member
Join Date: Aug 2007
Location: Kingsburg,
CA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: Prop to motor mount ?
Look for a prop adapter. Something like this http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXVY80
08-15-2007, 08:31 PM
#3
Senior Member
Thread Starter
Join Date: Jun 2004
Location: Monticello,
FL
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
RE: Prop to motor mount ?
Ok ... see I just didnt know if the prop mounted to the motor shaft or what....... Thanks..
So that adapter you listed will fit most any 540 elec motor ? I have a motor from a monster truck just collecting dust I wanted to do something with.
Thank you....
So that adapter you listed will fit most any 540 elec motor ? I have a motor from a monster truck just collecting dust I wanted to do something with.
Thank you....
08-16-2007, 01:49 PM
#4
Senior Member
Join Date: Dec 2002
Location: Chattanooga,
TN
Posts: 2,198
Likes: 0
Received 0 Likes
on
0 Posts
RE: Prop to motor mount ?
That one in the link is 3mm.... you need a 3.2mm adapter for a 1/8th shaft.
MJ 4702 from H-L is what you need (if you must buy from Tower, then I'm sure they stock a 3.17 or 3.2mm adapter too): http://www.hobby-lobby.com/propadap.htm
MJ 4702 from H-L is what you need (if you must buy from Tower, then I'm sure they stock a 3.17 or 3.2mm adapter too): http://www.hobby-lobby.com/propadap.htm
