Ax10 steering servo trouble
#1
Junior Member
Thread Starter
My Feedback: (8)
Join Date: Apr 2004
Location: Strafford,
MO
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Ax10 steering servo trouble
Ok guys i have a question for you. Just got my ax10 all together and it was crawling fine, then the steering servo started staying turned to the left.
So far all i have done is i switched servos and it was the same story. I dont know what the problem is, i sure could use some help. Thanks.
So far all i have done is i switched servos and it was the same story. I dont know what the problem is, i sure could use some help. Thanks.
#2
Senior Member
Join Date: Feb 2006
Location: The OG!,
MO
Posts: 1,597
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ax10 steering servo trouble
Are you using the stock Axial plastic servo horn?
If so the splines on the horn are probably stripped.
If not check out the settings on your radio and make sure your trims are centered.
If so the splines on the horn are probably stripped.
If not check out the settings on your radio and make sure your trims are centered.
#3
Junior Member
Thread Starter
My Feedback: (8)
Join Date: Apr 2004
Location: Strafford,
MO
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ax10 steering servo trouble
Yes i am, and i was wondering about that (plastic stork horn)
Yeah radio is fine. Guess ill hit my hobbie shop tomorrow and
get an upgrade. Thanks for the help.
Yeah radio is fine. Guess ill hit my hobbie shop tomorrow and
get an upgrade. Thanks for the help.