new 3.3 revo with reverse
09-18-2008, 10:09 PM
#2
Senior Member
RE: new 3.3 revo with reverse
U need to get the reverse primary gear(s), the forward/reverse shaft, and the micro servo that controls the forward/reverse....I am sure I am missing something and I know someone else will chime in where necessary.....
09-18-2008, 10:40 PM
#3
Senior Member
Join Date: Aug 2007
Location: Aurora,
IL
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
RE: new 3.3 revo with reverse
ORIGINAL: matts6887
U need to get the reverse primary gear(s), the forward/reverse shaft, and the micro servo that controls the forward/reverse....I am sure I am missing something and I know someone else will chime in where necessary.....
U need to get the reverse primary gear(s), the forward/reverse shaft, and the micro servo that controls the forward/reverse....I am sure I am missing something and I know someone else will chime in where necessary.....
09-18-2008, 11:02 PM
#4
My Feedback: (52)
Join Date: Jul 2005
Location: valparaiso, IN
Posts: 1,281
Likes: 0
Received 0 Likes
on
0 Posts
RE: new 3.3 revo with reverse
Although you want reverse you will probably be better off without it in the long run. Most convert to a foward only and do away with reverse all together.
09-18-2008, 11:50 PM
#5
Senior Member
RE: new 3.3 revo with reverse
ORIGINAL: sb13
Although you want reverse you will probably be better off without it in the long run. Most convert to a foward only and do away with reverse all together.
Although you want reverse you will probably be better off without it in the long run. Most convert to a foward only and do away with reverse all together.
09-19-2008, 12:22 AM
#6
Senior Member
Join Date: Aug 2007
Location: Aurora,
IL
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
RE: new 3.3 revo with reverse
I don't disagree with Matts or sb13 but I think it depends on what kind of driver you are. Even now that i've been driving for a year and a half I still use my reverse every now and again. It saves my lazy rear end from walking over and turning the truck around when it gets into the wrong place and going forward is no longer an option. Although, without revers you lose a very little weight and your truck won't studder when it first starts going forward.
09-19-2008, 07:06 AM
#7
Senior Member
Join Date: Feb 2006
Location: Orange County,
CA
Posts: 931
Likes: 0
Received 0 Likes
on
0 Posts
RE: new 3.3 revo with reverse
If you are out to just have fun, then reverse is for you. If you are the kind of guy that likes to get the most performance from your MT possible, then by all means remove the reverse.
09-19-2008, 11:38 AM
#8
Senior Member
My Feedback: (2)
Join Date: Feb 2004
Location: Moira, NY
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
RE: new 3.3 revo with reverse
ORIGINAL: matts6887
U need to get the reverse primary gear(s), the forward/reverse shaft, and the micro servo that controls the forward/reverse....I am sure I am missing something and I know someone else will chime in where necessary.....
U need to get the reverse primary gear(s), the forward/reverse shaft, and the micro servo that controls the forward/reverse....I am sure I am missing something and I know someone else will chime in where necessary.....
Dont forget to pick up a 3-ch radio as well. I am asuming you have the 2 ch radio that comes with the new revo.
