receiver cutting off under full accleration
#1
Member
Thread Starter
Join Date: Oct 2003
Location: durbannatal, SOUTH AFRICA
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
receiver cutting off under full accleration
hi anyone have problem when you put receiver on and accelarate and the reciver switches off.after disconecting battery and reconecting it, it comes on again but when you give it full throttle the receiver switches off again.anyone got any idea why this is happening . i am using spectrum receiver and mamba esc and mamba max motor
#2
Member
Join Date: Nov 2008
Location: Newcastle, UNITED KINGDOM
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
RE: receiver cutting off under full accleration
Do you mean the servo is cutting out? If it is the receiver please can you explain how you can tell it's the receiver.
#3
Senior Member
Join Date: Feb 2006
Location: Orange County,
CA
Posts: 931
Likes: 0
Received 0 Likes
on
0 Posts
RE: receiver cutting off under full accleration
Spektrum receivers are famous for not working correctly with some brands of ESC's. I'm not a Spektrum hater either, I'm about to buy a $700 plus dollar Spektrum product.
#4
Banned
Join Date: Feb 2009
Location: PASADENA, MD
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
RE: receiver cutting off under full accleration
Simple solution. Use a seperate battery for your reciever. If you are not, This the problem. The motor is sucking all the current and the reciever can't get any juice to power the servos. By pasing the reciever and using the motor battery to power the whole care is called B.E.C. battery -Eliminator- circuit Most newer reciever has this.
#5
Senior Member
Join Date: Feb 2006
Location: Orange County,
CA
Posts: 931
Likes: 0
Received 0 Likes
on
0 Posts
RE: receiver cutting off under full accleration
ORIGINAL: RCguru09
Simple solution. Use a seperate battery for your reciever. If you are not, This the problem. The motor is sucking all the current and the reciever can't get any juice to power the servos. By pasing the reciever and using the motor battery to power the whole care is called B.E.C. battery -Eliminator- circuit Most newer reciever has this.
Simple solution. Use a seperate battery for your reciever. If you are not, This the problem. The motor is sucking all the current and the reciever can't get any juice to power the servos. By pasing the reciever and using the motor battery to power the whole care is called B.E.C. battery -Eliminator- circuit Most newer reciever has this.
#6
Senior Member
My Feedback: (2)
Join Date: Jun 2008
Location: Panama City Beach,
FL
Posts: 886
Likes: 0
Received 0 Likes
on
0 Posts
RE: receiver cutting off under full accleration
one of these should solve your problem: [link]http://www.spektrumrc.com/Products/Default.aspx?ProdID=SPM1600[/link]
i don't think spektrum should charge for these. this is a design flaw. i have plenty of rx's that work fine during voltage drops. if it only works with above average and better battery systems, then it should say so on the box! or at least sell them at cost!
i don't think spektrum should charge for these. this is a design flaw. i have plenty of rx's that work fine during voltage drops. if it only works with above average and better battery systems, then it should say so on the box! or at least sell them at cost!