tythebigsexy

ok i got the himoto rock crusher i installed every thing got every thing did every thing (right) and the g/d tires turn the same way no matter what side i put steerin arm on 1 guy posted a vid on how to do it to and i even looked at that and did every thing on there y wont it work HELP ME im going nuts!! (grumbles) it just ant workin

guver

My Feedback: (325)

If there's no way to do it mechanically then possibly a reversing y harness can be had or made that reverses just one servo.

tythebigsexy

i got the y harrens how would i revers 1? i got red black and white wire what does what

RCguru09

You need a "y" harness with a reverser .Their are only 3 way to set up four wheel steering.
1. With a 2 channel radio with 1 servo
2. with a 2 channel radio and a reverse "Y" harness. 2 servos for steering.
3. A 4 channel radio. 2 servos independant for steering.

I have used all three and if you want true 4 wheel steering then option 3 is the best

Druss

Actually, the other way is to use two servos that rotate in different directions stock.

For instance, Hitec and Futaba servos rotate in opposite directions. Find one of each with the same specs and you're set.

tythebigsexy

so i gota but a new servoe man *** what a g/d wast of money

NitroVette

This can be used for 4WS when only a two channel radio is used:

http://www.horizonhobby.com/Products...ProdID=JRPA900

NitroVette

This might be a better choice:

http://www.horizonhobby.com/Products...ProdId=JRPA905

RCguru09

Neither will work for his problem. Only a servo reverser "Y" harness will. The Expert one is the cheapest @ $8.50 [8D]

http://www.horizonhobby.com/Products...ProdID=EXRA320

Matt_Gruizinga

My Feedback: (1)

HAHA for $70 i would just buy a new servo!

tythebigsexy

ya i got the reviers y and that worked so all good now thnx all!!!!