Aftershock axle poping out :(
#1
Member
Thread Starter
Join Date: Nov 2008
Location: , INDIA
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Aftershock axle poping out :(
I noticed that the rear drive shaft/axle of my aftershock is poping out of the housing. Considering that it cannot shrink and neither the rear differntial and transmission cannot shift, I dont know what could be the reason. Now i cannot transfer power to the rear wheel and luckily noticed this before major damage. Is there any way to reduce the gap between the rear diff and central housing.
Pictures will tell my story. other than that and a clutch replacement I love this truck
Thanks
SR
Pictures will tell my story. other than that and a clutch replacement I love this truck
Thanks
SR
#2
My Feedback: (31)
Join Date: Mar 2003
Location: Danville,
KY
Posts: 4,388
Likes: 0
Received 0 Likes
on
0 Posts
RE: Aftershock axle poping out :(
This would probably be better in the losi section.
It seems to me though that your chassis must be bent? I think that is the only way you would be able to lose the rear driveshaft like that. Unless that is the wrong shaft and it is close, but just not quite long enough. Id look to see if your chassis is bent, differential is pushed back somehow or something similar.
It seems to me though that your chassis must be bent? I think that is the only way you would be able to lose the rear driveshaft like that. Unless that is the wrong shaft and it is close, but just not quite long enough. Id look to see if your chassis is bent, differential is pushed back somehow or something similar.
#3
Senior Member
Join Date: Oct 2006
Location: ontario,
ON, CANADA
Posts: 2,184
Likes: 0
Received 0 Likes
on
0 Posts
RE: Aftershock axle poping out :(
You Probably have a Cracked or Broken Diff Retainer ring........... & a Tweaked Chassis would also cause it......
http://www.overdriverc.com/proddetai...SB2257&cat=154
http://www.overdriverc.com/proddetai...SB2257&cat=154
#4
Member
Thread Starter
Join Date: Nov 2008
Location: , INDIA
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
RE: Aftershock axle poping out :(
ORIGINAL: cummins driver
This would probably be better in the losi section.
It seems to me though that your chassis must be bent?
This would probably be better in the losi section.
It seems to me though that your chassis must be bent?
Thanks