Details4Scale Turkey Feathers & Afterburner Light Ring System
#1
Senior Member
Thread Starter
Join Date: May 2006
Location: Camarillo,
CA
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Details4Scale Turkey Feathers & Afterburner Light Ring System
[X(] Niccccccccccccce! Watch the video by clicking the picture on the first link:
[link=http://www.details4scale.com/ABlightsystems.htm]http://www.details4scale.com/ABlightsystems.htm[/link]
[link=http://www.details4scale.com/Skymaster%2016%20F16.htm]http://www.details4scale.com/Skymaster%2016%20F16.htm[/link]
[link=http://www.details4scale.com/ABlightsystems.htm]http://www.details4scale.com/ABlightsystems.htm[/link]
[link=http://www.details4scale.com/Skymaster%2016%20F16.htm]http://www.details4scale.com/Skymaster%2016%20F16.htm[/link]
#4
My Feedback: (8)
Join Date: Mar 2002
Location: Helena,
AL
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
RE: Details4Scale Turkey Feathers & Afterburner Light Ring System
Sweet!! The 70mm will fit the FB/SM F-5/T-38 nicely. There is not much room between the pipe and the fiberglass exhaust cone. I'll just have to trim the lip off the end of the fiberglass exhaust cone.
Jed
Jed
#6
Senior Member
Thread Starter
Join Date: May 2006
Location: Camarillo,
CA
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
RE: Details4Scale Turkey Feathers & Afterburner Light Ring System
They're going to post a video a some point...they're apparently still finetuning and will RTM early 2010.
#7
My Feedback: (3)
Join Date: Apr 2004
Location: Pocatello,
ID
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
RE: Details4Scale Turkey Feathers & Afterburner Light Ring System
ORIGINAL: ticketec
anyone know what they are asking for the working turkey feathers?? it would be interesting to see in action
anyone know what they are asking for the working turkey feathers?? it would be interesting to see in action
Dan
#8
My Feedback: (86)
RE: Details4Scale Turkey Feathers & Afterburner Light Ring System
For all you FEJ 1/5.5 F-16 owners, Dan is working on several accessories for my plane right now. I shipped him the Fuse so he could do the molds and fit for the Speek Brakes, Chute system and lights. Also sent the Tail cone for him to see if he could use existing parts for the working nozzle too. Dan informed me that he should have these parts (not the nozzle) done by mid January. If anyone wants to pre-order these, contact Dan asap so he can process enough product while he completes mine.
Rex
Rex
#10
My Feedback: (3)
Join Date: Apr 2004
Location: Pocatello,
ID
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
RE: Details4Scale Turkey Feathers & Afterburner Light Ring System
The forward nozzle diameter is 8.312 inches. The design requires that the rear 1.125" of the Skymaster fuse to be cut off to alllow for the actual scale location for the front burner part of the nozzle. The Skymaster paint for the simulated front part of the burner nozzle that comes on the ARF aircraft is 1" too far forward (meaning the overall nozzle length is actually 1" too short of scale). The only issue in doing the fuse mod is the servo location for the rudder, but since so many have already made new mods to the rudder servo location anyway, it's not really an issue at all. The nozzle will also fit the FEI Bao F-16 and the JL F-16 with similar mods.
Dan
Dan
#11
My Feedback: (23)
RE: Details4Scale Turkey Feathers & Afterburner Light Ring System
ORIGINAL: Details 4 Scale
The forward nozzle diameter is 8.312 inches. The design requires that the rear 1.125'' of the Skymaster fuse to be cut off to alllow for the actual scale location for the front burner part of the nozzle. The Skymaster paint for the simulated front part of the burner nozzle that comes on the ARF aircraft is 1'' too far forward (meaning the overall nozzle length is actually 1'' too short of scale). The only issue in doing the fuse mod is the servo location for the rudder, but since so many have already made new mods to the rudder servo location anyway, it's not really an issue at all. The nozzle will also fit the FEI Bao F-16 and the JL F-16 with similar mods.
Dan
The forward nozzle diameter is 8.312 inches. The design requires that the rear 1.125'' of the Skymaster fuse to be cut off to alllow for the actual scale location for the front burner part of the nozzle. The Skymaster paint for the simulated front part of the burner nozzle that comes on the ARF aircraft is 1'' too far forward (meaning the overall nozzle length is actually 1'' too short of scale). The only issue in doing the fuse mod is the servo location for the rudder, but since so many have already made new mods to the rudder servo location anyway, it's not really an issue at all. The nozzle will also fit the FEI Bao F-16 and the JL F-16 with similar mods.
Dan