anthor engine question
#1
Member
Thread Starter
Join Date: Dec 2007
Location: yakima,
WA
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
anthor engine question
I fired up my team orion wasp .26 today sealed yestday. It seems to be alot higher quality then the stock.25 and the mach 427, I'm excited.My question is in the box for the wasp # 86400 I found what seems to be another lsn.Do I need to change what is in the carb now?The directions say to turn the lsn out 10 to 11.5 turns, that didn't work. It seemed to flood (super hard to pull) finally after so adjusting I got it to fire @ 6 turns out. seemed to idel realy nice lots of smoke, I let it idel threw i tanks of fuel triing to adjust to get my temps up after a tank of fuel @idel with small blips here and there my temps were only 130 to 150 what should I do? which way should I tune ambient temp was 42 deg.F a little foggie does that help with some sort if evaluation. Input please thanks!! zuel
#2
Senior Member
Join Date: Dec 2006
Location: Salina,
KS
Posts: 6,113
Likes: 0
Received 0 Likes
on
0 Posts
RE: anthor engine question
They had a change in design, the newer ones are much coarser threaded. You are correct, they still send out the old instructions. Glen