Harlock RC Viper 140
#26
Join Date: Oct 2018
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Can you let me know what batteries you are using and your flight time with them? I'm building a 12S now and am trying to decide what batteries to use in it.
#27
My Feedback: (11)
I have been flying a set of gensace 5000’s and a set of the latest Turnigy Graphene 75C. 4000’s. I use a capacity sensor (Jeti) to decide when its time to land. I honestly can not tell you how long my flights are.
I want to mention the Turnigy Packs are the best packs I have used to date!
I want to mention the Turnigy Packs are the best packs I have used to date!
Last edited by Bob_B; 10-29-2018 at 05:30 AM.
#31
Thread Starter
#33
My Feedback: (11)
Hi All,
I just ordered this jet yesterday from Harlock RC and my tracking shows it will be here Thursday. Wow! That is fast, I waited months for my T1 and Skymaster-Xterme F4e. Anyway I plan to put a Kingtech 70 in this plane when they become available again. Flying off a paved runway so went with the stock landing gear with brakes. My radio gear is Jeti and will use a Jeti 10ch Assist receiver.
Regarding servo requirements, the instructions picture shows Savox SH0257mg servos. I have several of them as well as Savox SH0255mg servos. I run LiFe 6.6v batteries for my flight equipment. Will these servos work will with this plane?
Planned applications:
Flaps, Elevators, Rudder - SH0255mg - Speed @6v - 0.13 sec/60 deg / Torque @6v - 3.9kg/54.2oz-in
Steering and Ailerons - SH0257mg - Speed @6v - 0.09 sec/60 deg / Torque @6v - 2.2kg/30.6oz-in
Thank you,
Jeff
I just ordered this jet yesterday from Harlock RC and my tracking shows it will be here Thursday. Wow! That is fast, I waited months for my T1 and Skymaster-Xterme F4e. Anyway I plan to put a Kingtech 70 in this plane when they become available again. Flying off a paved runway so went with the stock landing gear with brakes. My radio gear is Jeti and will use a Jeti 10ch Assist receiver.
Regarding servo requirements, the instructions picture shows Savox SH0257mg servos. I have several of them as well as Savox SH0255mg servos. I run LiFe 6.6v batteries for my flight equipment. Will these servos work will with this plane?
Planned applications:
Flaps, Elevators, Rudder - SH0255mg - Speed @6v - 0.13 sec/60 deg / Torque @6v - 3.9kg/54.2oz-in
Steering and Ailerons - SH0257mg - Speed @6v - 0.09 sec/60 deg / Torque @6v - 2.2kg/30.6oz-in
Thank you,
Jeff
#36
My Feedback: (11)
I will also have a R3 attached to the Rex 10 Assist which I can expand channels with the R3. I do not use y harnesses whenever possible. I saw that MKS 93 servos have good specs and drop in easily. My thought is to work with what I have before buying new ones if they have enough torque. Just seems some of these setups being done have a ton of torque for small flying surfaces.
Thank you,
Jeff
#39
Hi All,
I just ordered this jet yesterday from Harlock RC and my tracking shows it will be here Thursday. Wow! That is fast, I waited months for my T1 and Skymaster-Xterme F4e. Anyway I plan to put a Kingtech 70 in this plane when they become available again. Flying off a paved runway so went with the stock landing gear with brakes. My radio gear is Jeti and will use a Jeti 10ch Assist receiver.
Regarding servo requirements, the instructions picture shows Savox SH0257mg servos. I have several of them as well as Savox SH0255mg servos. I run LiFe 6.6v batteries for my flight equipment. Will these servos work will with this plane?
Planned applications:
Flaps, Elevators, Rudder - SH0255mg - Speed @6v - 0.13 sec/60 deg / Torque @6v - 3.9kg/54.2oz-in
Steering and Ailerons - SH0257mg - Speed @6v - 0.09 sec/60 deg / Torque @6v - 2.2kg/30.6oz-in
Thank you,
Jeff
I just ordered this jet yesterday from Harlock RC and my tracking shows it will be here Thursday. Wow! That is fast, I waited months for my T1 and Skymaster-Xterme F4e. Anyway I plan to put a Kingtech 70 in this plane when they become available again. Flying off a paved runway so went with the stock landing gear with brakes. My radio gear is Jeti and will use a Jeti 10ch Assist receiver.
Regarding servo requirements, the instructions picture shows Savox SH0257mg servos. I have several of them as well as Savox SH0255mg servos. I run LiFe 6.6v batteries for my flight equipment. Will these servos work will with this plane?
Planned applications:
Flaps, Elevators, Rudder - SH0255mg - Speed @6v - 0.13 sec/60 deg / Torque @6v - 3.9kg/54.2oz-in
Steering and Ailerons - SH0257mg - Speed @6v - 0.09 sec/60 deg / Torque @6v - 2.2kg/30.6oz-in
Thank you,
Jeff
David
#48
Rgds
JC
#50