Goldberg Cub Windshield Installation
#1
Thread Starter
Goldberg Cub Windshield Installation
I'm looking for some guidance on the best possible installation technique for the windshield and side windows on the Goldberg Anniversary Cub. My hope is for a clean, strong and air tight installation.
If you have some suggestions, please let me know!
Best regards,
Tony
If you have some suggestions, please let me know!
Best regards,
Tony
#2
My Feedback: (7)
Join Date: Jun 2002
Location: Bandera,
TX
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
Goldberg Cub Windshield Installation
having build several C.G. J-3's ( btw. a great flying airplane), I do it this way.
Cut the windshield at the recommended line and glue ( I use R/C- 56, it dries clear), it to the fuselage. I clamp the sides between two C-Clamps, padded with soft balsa to keep from scratching.
Try that, work's good.
Cut the windshield at the recommended line and glue ( I use R/C- 56, it dries clear), it to the fuselage. I clamp the sides between two C-Clamps, padded with soft balsa to keep from scratching.
Try that, work's good.