Sachs Selettra Ignition Coil
#1
Member
Thread Starter
My Feedback: (21)
Join Date: Jun 2003
Location: Olive Branch, MS
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Sachs Selettra Ignition Coil
Hi All,
I have an engine that I bought off a fellow RCU member a couple of years back that has run awesome for me. Was a great buy. I was told that it is a Sachs 3.2. The problem I have run into is that the coil has gone kaput! It fires, well just when IT wants to....I am having a heck of a time finding a replacement and was hoping that someone out there could help me out/point me in the right direction to finding a replacement in the states.....besides just sucking it up and going with electronic ignition, although feel free to point me in that direction to as I will rule nothing out.
The flywheel on the motor says Selettra and has their "symbol" on it. The coil has the same symbol on it and right on the front it has the following in big raised letters/numbers....PN5523.
I have looked all over the net and can find nothing. I'm sure with my luck these things havent been made in 30 years and the guy that made them was burried with the molds.
Any help would be appreciated.
Thanks in advanced,
Russ
I will post a picture of the motor/coil tomorrow
I have an engine that I bought off a fellow RCU member a couple of years back that has run awesome for me. Was a great buy. I was told that it is a Sachs 3.2. The problem I have run into is that the coil has gone kaput! It fires, well just when IT wants to....I am having a heck of a time finding a replacement and was hoping that someone out there could help me out/point me in the right direction to finding a replacement in the states.....besides just sucking it up and going with electronic ignition, although feel free to point me in that direction to as I will rule nothing out.
The flywheel on the motor says Selettra and has their "symbol" on it. The coil has the same symbol on it and right on the front it has the following in big raised letters/numbers....PN5523.
I have looked all over the net and can find nothing. I'm sure with my luck these things havent been made in 30 years and the guy that made them was burried with the molds.
Any help would be appreciated.
Thanks in advanced,
Russ
I will post a picture of the motor/coil tomorrow
#3
Member
Thread Starter
My Feedback: (21)
Join Date: Jun 2003
Location: Olive Branch, MS
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
RE: Sachs Selettra Ignition Coil
Yeah but NONE of those even look close to my coil and this of course has me wondering if my engine is even a Sachs. Either way it's been a great motor.
Here are some engine pics. Coil pics (or whats left of it as it got tossed under a bunch of stuff in the trash bin and well didnt fair so well) will be uploaded soon.
*****Coil Pic's Added*****
Here are some engine pics. Coil pics (or whats left of it as it got tossed under a bunch of stuff in the trash bin and well didnt fair so well) will be uploaded soon.
*****Coil Pic's Added*****
#6
Senior Member
RE: Sachs Selettra Ignition Coil
ORIGINAL: overkill
OK, Coil Pics Added.....I only hope someone has one sitting around or knows where I can find one!!!
Thanks,
Russ
OK, Coil Pics Added.....I only hope someone has one sitting around or knows where I can find one!!!
Thanks,
Russ
BCCHI