Eagle 50 setup help
#1
Senior Member
Thread Starter
Join Date: Sep 2006
Location: Ft. Pierce,
FL
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
Eagle 50 setup help
First off, I'm an rc car guy, so helis are new to me.
I have 2 friends who recently purchased Eagle 50 helis. Neither of them are able to set up their tx's. The problem is this- they turn on the tx, then plug in the batt on the heli. The rx indicator flashes rapidly and will not stop flashing. These guys are, to say the least, upset that they cannot get their helis working. I am amazed at the lack of troubleshooting in the "manual" supplied with this product, and the lack of info on the ExceedRC website. Any help will be appreciated. Eagle 50 with #2604 rx and 2.4g tx.
I have 2 friends who recently purchased Eagle 50 helis. Neither of them are able to set up their tx's. The problem is this- they turn on the tx, then plug in the batt on the heli. The rx indicator flashes rapidly and will not stop flashing. These guys are, to say the least, upset that they cannot get their helis working. I am amazed at the lack of troubleshooting in the "manual" supplied with this product, and the lack of info on the ExceedRC website. Any help will be appreciated. Eagle 50 with #2604 rx and 2.4g tx.
#2
Senior Member
Join Date: Sep 2010
Location: la puente, CA, UNITED KINGDOM
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
RE: Eagle 50 setup help
I'm sorry about your trouble here but if this your first helicopter I would ask you please send me back that 6channel helicopter, 6channel is not for a beginners it almost samething as the nitro car and electrion. would you recommand me buying a nitro car as a first car.Can I have your order number please.
Eric</p>