Grad Aero Students need R/C help!
08-30-2003, 05:55 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2003
Location: Kansas
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Grad Aero Students need R/C help!
Hi guys, we are a bunch of grad students from the University of Kansas. For one of our design classes, we are building a Byron F20 model, putting in a turbojet with thrust vectoring.
The reason for choosing the F20 was that one of the team-members already had a 30% assembled model, and we decided to go with that...but the problem is that nobody makes that model anymore.
Right now, our biggest problem is measuring the F-20 model, so that we can build a CAD drawing and build a flight simulator.
Does anyone have suggestions, or know where I can find the dimensioning of the fuselage, airfoil sections, wing sections etc. of this model?
My email is [email protected]
Regards
Riaan
The reason for choosing the F20 was that one of the team-members already had a 30% assembled model, and we decided to go with that...but the problem is that nobody makes that model anymore.
Right now, our biggest problem is measuring the F-20 model, so that we can build a CAD drawing and build a flight simulator.
Does anyone have suggestions, or know where I can find the dimensioning of the fuselage, airfoil sections, wing sections etc. of this model?
My email is [email protected]
Regards
Riaan
08-30-2003, 11:41 PM
#2
My Feedback: (38)
Join Date: Jan 2002
Location: Nashville, TN,
Posts: 1,452
Likes: 0
Received 0 Likes
on
0 Posts
F-20
Check with Iron Bay Models, they bought the Byron line.
ironbaymodels.com
As far as thrust vectoring, this may not be the plane for that, but good luck with it.
Randy
ironbaymodels.com
As far as thrust vectoring, this may not be the plane for that, but good luck with it.
Randy
