Carbon fibre, which glue?
#1
Junior Member
Thread Starter
Join Date: Jun 2003
Location: Skjetten, NORWAY
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Carbon fibre, which glue?
Im building a Great Planes "Fundango" park-flier, and is thinking about substituting the fibre-glass tail boom with a carbon-fibre type (to save some weight). I have never worked with carbon-fibre before, and wonder if epoxy is the right glue to fix the tail boom to the balsa surfaces?
#2
Senior Member
My Feedback: (2)
Join Date: Apr 2003
Location: Chino hills,
CA
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Carbon fibre, which glue?
Yep,
just make sure you use a slow epoxy, and expose some of the fibers of the boom at the attach point IE sand the gloss of the shaft and get to bare carbon. With a slow flyer like that I dont think you would really need the CF but thats up to you.
just make sure you use a slow epoxy, and expose some of the fibers of the boom at the attach point IE sand the gloss of the shaft and get to bare carbon. With a slow flyer like that I dont think you would really need the CF but thats up to you.