How does this piston look?
11-03-2004, 12:35 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2004
Location: Fort Collins, CO
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
How does this piston look?
Anyone who knows how a piston should look after about a gallon and a half let me know how this one looks to you. Thanks in advance for your feedback.
11-03-2004, 12:53 PM
#2
Junior Member
Join Date: Oct 2004
Location: , CO
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
RE: How does this piston look?
'Sup Dan, it's Alex from the BMX track on Sunday. [8D]
Worried about your piston after the air filter incident, huh? I think as long as there aren't any scratches/gouges/score marks on the piston or inside the sleeve, it should be fine. And I think you'll know pretty quickly when you try to run it if it's damaged. That pic is a bit blurry so it's hard to see fine details like marks on the piston.
HobbyTown had no spares for me, so I've got an order from TowerHobbies on the way, should be here tomorrow. I also got a 6-pack of those grub screws for the exhaust, you're welcome to one if you'd like.
I'll be driving at the track this weekend, hope to see you there.
Worried about your piston after the air filter incident, huh? I think as long as there aren't any scratches/gouges/score marks on the piston or inside the sleeve, it should be fine. And I think you'll know pretty quickly when you try to run it if it's damaged. That pic is a bit blurry so it's hard to see fine details like marks on the piston.
HobbyTown had no spares for me, so I've got an order from TowerHobbies on the way, should be here tomorrow. I also got a 6-pack of those grub screws for the exhaust, you're welcome to one if you'd like.
I'll be driving at the track this weekend, hope to see you there.
11-03-2004, 01:22 PM
#3
Junior Member
Thread Starter
Join Date: Oct 2004
Location: Fort Collins, CO
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
RE: How does this piston look?
Whats up man? Good to hear you will be up and running. I posted earlier today with a link to my blog where I wrote a big piece about last weekend including our outing. You should check it out. www.danthehitman.net I would love to get one of those screws from you for the pipe. I also modified a motorsaver filter to fit on the original filter tube so I should be ready by Saturday as well. I will probably give you a call this week, I learned of a track in loveland with an offroad and oval course. I am going to go check it out at lunch and I will let you know how it goes. Peace!
11-03-2004, 02:24 PM
#4
Junior Member
Join Date: Oct 2004
Location: , CO
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
RE: How does this piston look?
Yup, just got done reading your writeup, and sweet vids! That's awesome Lynn got the one of me jumping over your truck. 
I'd be down to checkout the track in Loveland this weekend if they're open, though I probably need to improve my driving skills a bit, hehe. Lemme know how that place looks and when you think you'll be out with the truck this weekend...
I'd be down to checkout the track in Loveland this weekend if they're open, though I probably need to improve my driving skills a bit, hehe. Lemme know how that place looks and when you think you'll be out with the truck this weekend...
11-03-2004, 04:56 PM
#5
Junior Member
Thread Starter
Join Date: Oct 2004
Location: Fort Collins, CO
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
RE: How does this piston look?
Right on, I will give you a call and let you know when I plan on heading out on Saturday. Have a good week man.
11-04-2004, 12:47 AM
#6
Senior Member
My Feedback: (1)
Join Date: Aug 2003
Location: Clinton,
NY
Posts: 723
Likes: 0
Received 0 Likes
on
0 Posts
RE: How does this piston look?
I was looking at your blog. I to am grateful that Bush was relected. I was also wondering if you knew you had your revo tires on backwards???
ORIGINAL: danthehitman
Whats up man? Good to hear you will be up and running. I posted earlier today with a link to my blog where I wrote a big piece about last weekend including our outing. You should check it out. www.danthehitman.net I would love to get one of those screws from you for the pipe. I also modified a motorsaver filter to fit on the original filter tube so I should be ready by Saturday as well. I will probably give you a call this week, I learned of a track in loveland with an offroad and oval course. I am going to go check it out at lunch and I will let you know how it goes. Peace!
Whats up man? Good to hear you will be up and running. I posted earlier today with a link to my blog where I wrote a big piece about last weekend including our outing. You should check it out. www.danthehitman.net I would love to get one of those screws from you for the pipe. I also modified a motorsaver filter to fit on the original filter tube so I should be ready by Saturday as well. I will probably give you a call this week, I learned of a track in loveland with an offroad and oval course. I am going to go check it out at lunch and I will let you know how it goes. Peace!
11-04-2004, 11:27 AM
#7
Junior Member
Thread Starter
Join Date: Oct 2004
Location: Fort Collins, CO
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
RE: How does this piston look?
In those first two pics I do have them on backwards. I didn't notice it that day but they are on correctly now. I usually check but I must have spaced it or had it backwards in my head since they are all on backwards. Thanks for pointing that out, I usually get them right.
