ZDZ Thottle hook-Up
#1
Thread Starter
My Feedback: (95)
ZDZ Thottle hook-Up
Could anyone with this engine tell me the best way that they used to hook-up to the thottle arm that is on the Bing#48 carb.On mine the stop screw is in the way on one side and the adjustment screws are in the the way on the other side.It will not let me get a straight shot to the hole that is in the thottle arm. Thanks in advance MJ
#2
My Feedback: (198)
Join Date: Feb 2002
Location: El Reno, OK
Posts: 6,707
Likes: 0
Received 0 Likes
on
0 Posts
ZDZ Thottle hook-Up
Many owners of the ZDZ just use a cut off wheel to remove the throttle stop screw/mounting bracket. That gives you a straight shot, and you don't use the stop screw in airplane applications anyway.
#3
Member
Join Date: Oct 2002
Location: Zagreb, CROATIA (HRVATSKA)
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
ZDZ Thottle hook-Up
You don't even have to grind the bracket off. For me it was enough to just remove the stop screw. I enlarged existing hole (for 3mm screw) in the throttle arm and used a ball link and sullivan goldn rod to connect it to the servo.