Engine stand-offs on Extra 260 with ZDZ Super 80
#1
Thread Starter
Join Date: Oct 2005
Location: Tuscaloosa,
AL
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Engine stand-offs on Extra 260 with ZDZ Super 80
Hey guys. I read several threads about different engines and the size stand-offs they were using on the 260. Seems like I read something on the size that is being used on the Extra 260 with a ZDZ Super 80, but I can't find it at the time. I'd appreciate if any of you with this setup would let me know what size stand-offs your using and what kinds. I know there are quite a few brands.
Thanks
Thanks
#2
Senior Member
My Feedback: (17)
Join Date: Jul 2003
Location: Boisbriand,
QC, CANADA
Posts: 1,592
Likes: 0
Received 0 Likes
on
0 Posts
RE: Engine stand-offs on Extra 260 with ZDZ Super 80
I am using 1/4'' stand off that give me 1/8'' clearance between cowl and backplate spinner.
1/4'' scrap plywoood or better red oak would work too and lot cheaper than stand-offs.
You can buy standoff here:
http://www.forgues-research.com/
or here:
1/4'' scrap plywoood or better red oak would work too and lot cheaper than stand-offs.
You can buy standoff here:
http://www.forgues-research.com/
or here: