rOTo StaRts
12-06-2006, 09:44 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2006
Location: Edmond, OK
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
rOTo StaRts
Where can i get a cheap roto start and the backplate for it? I need one for my ofna .26 force. O yeah the reason is i ripped my pull start off litterally the mounting holes riped off. and a one way bearing.
12-06-2006, 10:13 PM
#3
Senior Member
Join Date: Jan 2006
Location: gardiner,
MT
Posts: 1,623
Likes: 0
Received 0 Likes
on
0 Posts
RE: rOTo StaRts
Hears the back plate you need http://www.rcplanet.com/backplate_44...60937_prd1.htm
And hear is the starter http://www.rcplanet.com/ofna_shaft_s...69868_prd1.htm
And you will aslo need a 7.2V Sub C size battery pack.
Hope this helps, btw, this is a great system and i pal nto use it on my reov in the future
And hear is the starter http://www.rcplanet.com/ofna_shaft_s...69868_prd1.htm
And you will aslo need a 7.2V Sub C size battery pack.
Hope this helps, btw, this is a great system and i pal nto use it on my reov in the future
12-06-2006, 10:40 PM
#6
Senior Member
Join Date: Jan 2006
Location: Tallahassee,
FL
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
RE: rOTo StaRts
ORIGINAL: Revoview
how about a one way bearing? Under 15 bucks?
how about a one way bearing? Under 15 bucks?
I'LL MAKE YOU A DEAL AND SELL YOU A 2-WAY BEARING FOR $20!!!
Urgh ...
12-06-2006, 10:46 PM
#8
Senior Member
Join Date: Jan 2006
Location: Tallahassee,
FL
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
RE: rOTo StaRts
ORIGINAL: Revoview
whats a 2 way bearing?[sm=confused.gif]
whats a 2 way bearing?[sm=confused.gif]
12-06-2006, 10:53 PM
#10
Senior Member
Join Date: Jan 2006
Location: gardiner,
MT
Posts: 1,623
Likes: 0
Received 0 Likes
on
0 Posts
RE: rOTo StaRts
its a normal baring, this is what you need thoe. http://www.rcplanet.com/one_way_bear...60359_prd1.htm
12-06-2006, 10:58 PM
#12
Senior Member
Join Date: Jan 2006
Location: gardiner,
MT
Posts: 1,623
Likes: 0
Received 0 Likes
on
0 Posts
RE: rOTo StaRts
Its all the same, they are all ofna engines with the same parts exept piccos are ported diferently and usually have turbo plugs, the back plates, carbs, barings, heads, blocks and starters are all interchaingable. Trust me, i have don't ALOT of reserching on ofna engines over the last week or two.
12-07-2006, 01:44 PM
#15
Member
Join Date: Jul 2006
Location: , NJ
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
RE: rOTo StaRts
That's a 12mm hex one-way bearing, a pretty standard part. The same part is sold by many different people at many different prices, but I usually get mine here: http://www2.towerhobbies.com/cgi-bin...?&I=LXLDH4&P=7
I have this bearing in my Picco powered Revo.
I have this bearing in my Picco powered Revo.
