Looking to scratch build DF jet
#1
Member
Thread Starter
Join Date: Jan 2003
Location: Corona, CA
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Looking to scratch build DF jet
Hi all,
I'm looking for a good glass fuse for either a F-16, F-15, or F-18 for .91 DF power. I prefer to do all my own composite work, but I don't feel like shaping a complex plug for the fuse. Is there anything out there that is readily available? The F-16 is preferred as it is single engine.
Thanks,
Eric
I'm looking for a good glass fuse for either a F-16, F-15, or F-18 for .91 DF power. I prefer to do all my own composite work, but I don't feel like shaping a complex plug for the fuse. Is there anything out there that is readily available? The F-16 is preferred as it is single engine.
Thanks,
Eric
#2
Senior Member
My Feedback: (6)
Join Date: Jan 2003
Location: Stratford,
NJ
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Looking to scratch build DF jet
there is a guy who I've seen from time to time on this site who makes a F-16 short kit based on the Combat Models F-16. He makes it with a glass fuse, and comes with ducting for fan setup.
I have seen him sell the kits on E-Bay. Here is a link to one he has on now:
http://cgi.ebay.com/ws/eBayISAPI.dll...category=19164
You might try to drop him a line, he might be willing to sell you the fuse alone.
Good luck,
Jeff
I have seen him sell the kits on E-Bay. Here is a link to one he has on now:
http://cgi.ebay.com/ws/eBayISAPI.dll...category=19164
You might try to drop him a line, he might be willing to sell you the fuse alone.
Good luck,
Jeff