JR Data safe system
#1
Thread Starter
My Feedback: (21)
JR Data safe system
Any ony have a Data safe from JR and using it with a computer that has USB inputs?
I bought the adapter cable that goes from the 9 pin sierial port to the USB.
Problem is that the program is not detecting the interface because it can't find the port. It tells me to set the port manuelly.
I have tried to select the d4 different ports and the auto detect still with no results.
Any help or suggestions would be appriciated.
JR reps are you out there?
Thanks
Joe Lewis
I bought the adapter cable that goes from the 9 pin sierial port to the USB.
Problem is that the program is not detecting the interface because it can't find the port. It tells me to set the port manuelly.
I have tried to select the d4 different ports and the auto detect still with no results.
Any help or suggestions would be appriciated.
JR reps are you out there?
Thanks
Joe Lewis
#2
Senior Member
My Feedback: (6)
Join Date: Mar 2003
Location: Riyadh, , SAUDI ARABIA
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
RE: JR Data safe system
Joe,
I went through this my self and it will not work cause your computer does not support serial ports.
You will only need to find a computer ( see if you have an old one or a desk top) and you might need an adopter for the number of pins. That is what will work. I went through that pain so I know it.
Best regards
I went through this my self and it will not work cause your computer does not support serial ports.
You will only need to find a computer ( see if you have an old one or a desk top) and you might need an adopter for the number of pins. That is what will work. I went through that pain so I know it.
Best regards