sikk 27cc carb setting
#2
Member
Join Date: Oct 2007
Location: tacoma, WA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
RE: sikk 27cc carb setting
I ran my brand new sikk today and did not need to adjust anything., start it up let warm up, udjust idle mixture scrw low one to gain best idle condition, high is in the water and running using a tach. and a ear, always check plug after each run the lighter it gets the leaner it is. you want on the brown side. NOT GREY THAT IS LEAN AND YOU WILL BURN IT DOWN. I am in tacoma and a marine mechanic by trade neep help just ask. Where in Washington you at
#3
Senior Member
Join Date: Feb 2007
Location: Honolulu,
HI
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
RE: sikk 27cc carb setting
ORIGINAL: fkboatman
I ran my brand new sikk today and did not need to adjust anything., start it up let warm up, udjust idle mixture scrw low one to gain best idle condition, high is in the water and running using a tach. and a ear, always check plug after each run the lighter it gets the leaner it is. you want on the brown side. NOT GREY THAT IS LEAN AND YOU WILL BURN IT DOWN. I am in tacoma and a marine mechanic by trade neep help just ask. Where in Washington you at
I ran my brand new sikk today and did not need to adjust anything., start it up let warm up, udjust idle mixture scrw low one to gain best idle condition, high is in the water and running using a tach. and a ear, always check plug after each run the lighter it gets the leaner it is. you want on the brown side. NOT GREY THAT IS LEAN AND YOU WILL BURN IT DOWN. I am in tacoma and a marine mechanic by trade neep help just ask. Where in Washington you at
#4
RE: sikk 27cc carb setting
Hey fkboatman;
I am very interested in getting a SIKK engine myself. O'Neil Brothers sell them with a steel pipe for $399. They claim the 25.4 is putting out 5.5 HP[sm=confused.gif]. That sounds too good to be true. Once you had a chance to run yours let us hear what you think about this motor.
I am very interested in getting a SIKK engine myself. O'Neil Brothers sell them with a steel pipe for $399. They claim the 25.4 is putting out 5.5 HP[sm=confused.gif]. That sounds too good to be true. Once you had a chance to run yours let us hear what you think about this motor.
#5
Senior Member
Join Date: Apr 2007
Location: rayleigh, UNITED KINGDOM
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
RE: sikk 27cc carb setting
Iv'e run a sikk for over a year without any probs apart from blowing head gaskets I cured this by using a cooper gasket then no probs I suggest you do this before you go much further. The carb setting is about 11/2 on each screw and adjust for performance as already stated I use a 257 walbro and it runs well turning a octura X472 prop.