Steering servo MXB-2S
#1
Junior Member
Thread Starter
Join Date: Mar 2010
Location: , SWEDEN
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Steering servo MXB-2S
<div style="background-color: rgb(255, 255, 255); padding-top: 5px; padding-right: 5px; padding-bottom: 5px; padding-left: 5px; margin-top: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; font-family: Arial, Verdana, sans-serif; font-size: 12px; ">Hi.</div>Is it possible to use the 02073 servo unit in an MXB-2S?
#3
Junior Member
Thread Starter
Join Date: Mar 2010
Location: , SWEDEN
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
RE: Steering servo MXB-2S
Ok, thanks. For example these? (www.amainhobbies.com/product_info.php/products_id/149537/n/Power-HD-HD-9001MG-Standard-Size-Analog-Metal-Gear-Servo,www.amainhobbies.com/product_info.php/products_id/4781/n/Hitec-HS-645MG-High-Torque-Metal-Gear-Servo-S-JR-Z)
Wanting to learn a bit more, are the servos standardized in regard to<ul>[*]size[*]spline pattern[*]fitting[*]voltage[*]etc.?[/list]<br type="_moz" />// H.T.<br type="_moz" />
<br type="_moz" /><br type="_moz" />
Wanting to learn a bit more, are the servos standardized in regard to<ul>[*]size[*]spline pattern[*]fitting[*]voltage[*]etc.?[/list]<br type="_moz" />// H.T.<br type="_moz" />
<br type="_moz" /><br type="_moz" />
#4
RE: Steering servo MXB-2S
standard servo's (like the ones you posted) are the same size, just like your steering and throttle servo's. They have different torque specs, spline specs, etc. the more torque the better for steering. most can use 4.8 or 6v input.
#5
Junior Member
Thread Starter
Join Date: Mar 2010
Location: , SWEDEN
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
RE: Steering servo MXB-2S
My local hobby dealer offers this(www.amainhobbies.com/product_info.php/products_id/149539/n/Power-HD-HD-1501MG-Standard-Size-Analog-Metal-Gear-Servo). Would it make a good choice?